INSTRUCTION BOOK MANUAL DE INSTRUCCIONES ... - Janome

Adjusting stretch stitch balanceIf the stretch stitch patterns are uneven when you sewon a particular fabric, correct them by turning the stitchlength dial.“–”“+”If the patterns are drawn out, correct them by setting thedial to the “–” side.If the patterns are compressed, correct them by settingthe dial to the “+” side.qwStitch Width DialTurn the stitch width dial to set the desired stitch widthnumber at the setting mark.The higher the number, the wider the stitchq Stitch width dialw Setting markCAUTION:Do not turn the stitch width dial while the needle is in thefabric, otherwise the needle may bend or break.Variable needle positionThe needle drop position of the straight stitches can bemoved between the center (5) and left (0) with the stitchwidth dial.34