INSTRUCTION BOOK MANUAL DE INSTRUCCIONES ... - Janome

zqInserting the bobbinz Place the bobbin in the bobbin holder with the threadrunning off as illustrated.q Threadxx Guide the thread into the front notch on the front sideof the bobbin holder. Draw the thread to the left,sliding it between the tension spring blades.w Front notche Tension spring bladeewcc Continue to draw the thread lightly until the threadslips into the side notch.r Side notchrvv Pull out about 4” (10 cm) of thread. Attach the hookcover plate. Check the threading by referring to thechart shown on the hook cover plate.t Thready Hook cover platety24