INSTRUCTION BOOK MANUAL DE INSTRUCCIONES ... - Janome

weWinding the bobbinzqz Pull out the handwheel to disengage the clutch.q Handwheelxwx Draw the thread from the spool. Guide the threadaround the bobbin winder thread guide.w Bobbin winder thread guidecvec Thread through the hole in the bobbin from the insideto the outside.Put the bobbin on the bobbin winder spindle with thefree end of the thread coming out at the top.e Bobbin winder spindlev Push the bobbin to the right.NOTE:Do not move the bobbin winder spindle while themachine is running.bb With the free end of the thread held in your hand,depress the foot control. Stop the machine when thebobbin has been wound a few layers, and cut thethread close to the bobbin.nn Depress the foot control again. When the bobbin isfully wound, it will stop automatically.Return the bobbin winder to its original position bymoving the spindle to the left, and cut the thread asillustrated.mm Push in the handwheel to engage the clutch.22