Gancio di traino GA25 Drawbar coupling GA25 Crochet d ... - Orlandi

6)
7)
8)
1)
2)
DRAWBAR COUPLING GA25
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
5.3 REPLACEMENT OF THE LIFT LEVER AND OF THE LIFT LEVER SPRING
4
PAG.
19/24
CHAP. 5
REV. A
Turn the release latch (4) in the direction indicated by the arrow (see box)
and insert the closing handle (5) in its position; insert the distance washer (22)
and stop with the pin (18);
Remount the coupling pin (3) keeping rotated the operating handle for
closing (5);
Remount everything in accordance with the points 7, 8, 9, 10, 11, 12, of the
chapter 5.1 REPLACEMENT OF THE COUPLING PIN page 18/24.
ATTENTION: Make sure that the coupling is closed, i.e. the coupling pin
(3) is down.
Proceed according to the points 1, 2, 3, of the chapter 5.1 REPLACEMENT
DEL COUPLING PIN page 17/24;
Remove the lift lever (2), lift lever spring (26) see chapter 7 DISPOSAL page
22/24 and proceed with their replacement according to the points 7, 8, 9,
10, 11, of chapter 5.1 REPLACEMENT OF THE COUPLING PIN page 18/24.
24
1