Safety data sheet - Micerium
Safety data sheet - Micerium
Safety data sheet - Micerium
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
34.0<br />
<strong>Safety</strong> <strong>data</strong> <strong>sheet</strong><br />
according to 1907/2006/EC, Article 31<br />
Page 1/8<br />
Printing date 06.03.2012 Version: 6<br />
Revision: 06.03.2012<br />
* 1 Identification of the substance/mixture and of the company/undertaking<br />
· Product identifier<br />
· Trade name: Ena Tender Metal Primer Bonding<br />
· Article number: ETBOND ETBOND-2<br />
· Relevant identified uses of the substance or mixture and uses advised against<br />
· Application of the substance / the preparation Dental bonding material<br />
· Details of the supplier of the safety <strong>data</strong> <strong>sheet</strong><br />
· Manufacturer/Supplier:<br />
<strong>Micerium</strong> spa., Via G. Marconi, 83 - 16036 Avegno (GE), Italy, Tel.: +39-0185-7887870, Fax: +39-0185-<br />
7887970<br />
· Further information obtainable from: Dr. Eugenio Miceli<br />
· Emergency telephone number:<br />
Poison Control Center San Martino Hospital (Genoa, Italy) Tel.: +39-010-352808 (available 24 h)<br />
2 Hazards identification<br />
· Classification of the substance or mixture<br />
· Classification according to Regulation (EC) No 1272/2008<br />
GHS02 flame<br />
Flam. Liq. 2 H225 Highly flammable liquid and vapour.<br />
GHS07<br />
Skin Irrit. 2 H315 Causes skin irritation.<br />
Skin Sens. 1 H317 May cause an allergic skin reaction.<br />
STOT SE 3 H335 May cause respiratory irritation.<br />
· Classification according to Directive 67/548/EEC or Directive 1999/45/EC<br />
Xi; Irritant<br />
R37/38: Irritating to respiratory system and skin.<br />
Xi; Sensitising<br />
R43: May cause sensitisation by skin contact.<br />
F; Highly flammable<br />
R11: Highly flammable.<br />
· Information concerning particular hazards for human and environment:<br />
The product has to be labelled due to the calculation procedure of the "General Classification guideline for<br />
preparations of the EU" in the latest valid version.<br />
· Classification system:<br />
The classification is according to the latest editions of the EU-lists, and extended by company and literature<br />
<strong>data</strong>.<br />
· Label elements<br />
· Labelling according to Regulation (EC) No 1272/2008<br />
The product is classified and labelled according to the CLP regulation.<br />
· Hazard pictograms GHS02, GHS07<br />
· Signal word Danger<br />
· Hazard-determining components of labelling:<br />
methyl methacrylate<br />
· Hazard statements<br />
H225 Highly flammable liquid and vapour.<br />
H315 Causes skin irritation.<br />
H317 May cause an allergic skin reaction.<br />
(Contd. on page 2)<br />
GB
34.0<br />
<strong>Safety</strong> <strong>data</strong> <strong>sheet</strong><br />
according to 1907/2006/EC, Article 31<br />
Page 2/8<br />
Printing date 06.03.2012 Version: 6<br />
Revision: 06.03.2012<br />
Trade name: Ena Tender Metal Primer Bonding<br />
(Contd. of page 1)<br />
H335 May cause respiratory irritation.<br />
· Precautionary statements<br />
P210<br />
Keep away from heat/sparks/open flames/hot surfaces. - No smoking.<br />
P241<br />
Use explosion-proof electrical/ventilating/lighting/equipment.<br />
P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin<br />
with water/shower.<br />
P321<br />
Specific treatment (see on this label).<br />
P405<br />
Store locked up.<br />
P501<br />
Dispose of contents/container in accordance with local/regional/national/international<br />
regulations.<br />
· Other hazards<br />
· Results of PBT and vPvB assessment<br />
· PBT: Not applicable.<br />
· vPvB: Not applicable.<br />
3 Composition/information on ingredients<br />
· Chemical characterization: Mixtures<br />
· Description: Mixture of substances listed below with nonhazardous additions.<br />
· Dangerous components:<br />
CAS: 80-62-6 methyl methacrylate<br />
EINECS: 201-297-1 Xi R37/38; Xi R43; F R11<br />
Flam. Liq. 2, H225; Skin Irrit. 2, H315; Skin Sens. 1, H317; STOT<br />
SE 3, H335<br />
· Additional information For the wording of the listed risk phrases refer to section 16.<br />
75-100%<br />
* 4 First aid measures<br />
· Description of first aid measures<br />
· General information Immediately remove any clothing soiled by the product.<br />
· After inhalation<br />
Take affected persons into fresh air and keep quiet.<br />
Seek medical treatment.<br />
· After skin contact<br />
Immediately wash with water and soap and rinse thoroughly.<br />
If skin irritation continues, consult a doctor.<br />
· After eye contact<br />
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.<br />
· After swallowing<br />
Rinse out mouth and then drink plenty of water.<br />
Do not induce vomiting; call for medical help immediately.<br />
· Information for doctor<br />
· Most important symptoms and effects, both acute and delayed No further relevant information available.<br />
· Indication of any immediate medical attention and special treatment needed<br />
No further relevant information available.<br />
5 Firefighting measures<br />
· Extinguishing media<br />
· Suitable extinguishing agents<br />
Foam<br />
Fire-extinguishing powder<br />
Carbon dioxide<br />
· For safety reasons unsuitable extinguishing agents Water with full jet.<br />
· Special hazards arising from the substance or mixture No further relevant information available.<br />
(Contd. on page 3)<br />
GB
34.0<br />
<strong>Safety</strong> <strong>data</strong> <strong>sheet</strong><br />
according to 1907/2006/EC, Article 31<br />
Page 3/8<br />
Printing date 06.03.2012 Version: 6<br />
Revision: 06.03.2012<br />
Trade name: Ena Tender Metal Primer Bonding<br />
· Advice for firefighters<br />
· Protective equipment: Wear self-contained respiratory protective device.<br />
· Additional information<br />
Cool endangered receptacles with water spray.<br />
Collect contaminated fire fighting water separately. It must not enter the sewage system.<br />
(Contd. of page 2)<br />
6 Accidental release measures<br />
· Personal precautions, protective equipment and emergency procedures<br />
Ensure adequate ventilation<br />
Wear protective equipment. Keep unprotected persons away.<br />
Keep away from ignition sources<br />
Use respiratory protective device against the effects of fumes/dust/aerosol.<br />
· Environmental precautions: Do not allow to enter sewers/ surface or ground water.<br />
· Methods and material for containment and cleaning up:<br />
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).<br />
Dispose contaminated material as waste according to item 13.<br />
· Reference to other sections<br />
See Section 8 for information on personal protection equipment.<br />
See Section 13 for disposal information.<br />
7 Handling and storage<br />
· Handling<br />
· Precautions for safe handling Keep receptacles tightly sealed.<br />
· Information about fire - and explosion protection:<br />
Keep ignition sources away - Do not smoke.<br />
Protect against electrostatic charges.<br />
· Conditions for safe storage, including any incompatibilities<br />
· Storage<br />
· Requirements to be met by storerooms and receptacles:<br />
Store in a cool location.<br />
Close container immediately after use and protect product from light incidence.<br />
Storage between 15 °C and 30 °C in a dry and well-aired place. Avoid heating the material to over 50 °C and<br />
cooling it below 5 °C.<br />
· Information about storage in one common storage facility: Store away from foodstuffs.<br />
· Further information about storage conditions: Protect from heat and direct sunlight.<br />
· Specific end use(s) No further relevant information available.<br />
* 8 Exposure controls/personal protection<br />
· Additional information about design of technical facilities: No further <strong>data</strong>; see item 7.<br />
· Control parameters<br />
· Ingredients with limit values that require monitoring at the workplace:<br />
80-62-6 methyl methacrylate<br />
WEL Short-term value: 416 mg/m³, 100 ppm<br />
Long-term value: 208 mg/m³, 50 ppm<br />
· Additional information: The lists valid during the making were used as basis.<br />
· Exposure controls<br />
· Personal protective equipment<br />
· General protective and hygienic measures<br />
Immediately remove all soiled and contaminated clothing<br />
Wash hands before breaks and at the end of work.<br />
(Contd. on page 4)<br />
GB
34.0<br />
<strong>Safety</strong> <strong>data</strong> <strong>sheet</strong><br />
according to 1907/2006/EC, Article 31<br />
Page 4/8<br />
Printing date 06.03.2012 Version: 6<br />
Revision: 06.03.2012<br />
Trade name: Ena Tender Metal Primer Bonding<br />
(Contd. of page 3)<br />
Do not inhale gases / fumes / aerosols.<br />
Avoid contact with the eyes and skin.<br />
· Respiratory protection:<br />
Not necessary if room is well-ventilated.<br />
Use suitable respiratory protective device when high concentrations are present.<br />
Short term filter device:<br />
Filter AX.<br />
· Protection of hands: Solvent resistant gloves<br />
· Material of gloves Butyl rubber, BR<br />
· Penetration time of glove material<br />
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be<br />
observed.<br />
· Eye protection: <strong>Safety</strong> glasses<br />
· Body protection:<br />
Solvent resistant protective clothing<br />
(Only when handling large quantities)<br />
9 Physical and chemical properties<br />
· Information on basic physical and chemical properties<br />
· General Information<br />
· Appearance:<br />
Form:<br />
Fluid<br />
Colour:<br />
Colourless<br />
· Odour: Characteristic<br />
· Odour threshold: Not determined.<br />
· pH-value: Not determined<br />
· Change in condition<br />
Melting point/Melting range: -48°C<br />
Boiling point/Boiling range: 101°C<br />
· Flash point: 10°C<br />
· Flammability (solid, gaseous) Not applicable.<br />
· Ignition temperature: 430°C<br />
· Decomposition temperature: Not determined.<br />
· Self-igniting: Product is not selfigniting.<br />
· Danger of explosion: Product is not explosive. However, formation of explosive air/<br />
vapour mixtures are possible.<br />
· Explosion limits:<br />
Lower: 2.1 Vol %<br />
Upper: 12.5 Vol %<br />
· Vapour pressure at 20°C: 47 hPa<br />
· Density at 20°C: 0.94 g/cm³<br />
· Relative density Not determined.<br />
· Vapour density Not determined.<br />
· Evaporation rate Not determined.<br />
· Solubility in / Miscibility with<br />
Water at 20°C:<br />
1.6 g/l<br />
· Segregation coefficient (n-octanol/water): Not determined.<br />
· Viscosity:<br />
dynamic:<br />
Not determined<br />
(Contd. on page 5)<br />
GB
34.0<br />
<strong>Safety</strong> <strong>data</strong> <strong>sheet</strong><br />
according to 1907/2006/EC, Article 31<br />
Page 5/8<br />
Printing date 06.03.2012 Version: 6<br />
Revision: 06.03.2012<br />
Trade name: Ena Tender Metal Primer Bonding<br />
kinematic:<br />
Not determined<br />
· Solvent content:<br />
Organic solvents: 0.0 %<br />
· Other information No further relevant information available.<br />
(Contd. of page 4)<br />
* 10 Stability and reactivity<br />
· Reactivity<br />
· Chemical stability<br />
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.<br />
· Possibility of hazardous reactions Exothermic polymerization<br />
· Conditions to avoid No further relevant information available.<br />
· Incompatible materials:<br />
In presence of radical formers (e. g. peroxides), deoxidizing substances, and/or heavy metal ions,<br />
polymerization with heat release is possible.<br />
· Hazardous decomposition products: No dangerous decomposition products known<br />
* 11 Toxicological information<br />
· Information on toxicological effects<br />
· Acute toxicity:<br />
· LD/LC50 values relevant for classification:<br />
methyl methacrylate LD-50 oral >5000 mg/kg rat (lit.)<br />
LD-50 inhalativ 7093 ppm/4h rat (lit.)<br />
· Primary irritant effect:<br />
· on the skin: Irritant to skin and mucous membranes.<br />
· on the eye: Slightly irritating.<br />
· Sensitization: Sensitization possible through skin contact.<br />
· Additional toxicological information:<br />
The product shows the following dangers according to the calculation method of the General EU<br />
Classification Guidelines for Preparations as issued in the latest version.<br />
Irritant<br />
12 Ecological information<br />
· Toxicity<br />
· Aquatic toxicity: No further relevant information available.<br />
· Type of test Effective concentration Method Assessment<br />
Toxicity to fish: LC-50: >79 mg/l OECD 203<br />
(MMA) NOEC: 40 mg/l ISO 7346<br />
Time: 96 h EEC84<br />
Species:<br />
Oncorhynchus mykiss<br />
Toxicity to Micro- ECO: 100 mg/l starting inhibition<br />
Organisms Species: of cell growth<br />
(MMA) Pseudomonas putida<br />
· Persistence and degradability No further relevant information available.<br />
· Behaviour in environmental systems:<br />
· Components:<br />
methyl methacrylate Biodegradability: 30,7 %<br />
Time:<br />
28 d<br />
Method: OECD 301 C<br />
Valuation: difficult to decompose<br />
(Contd. on page 6)<br />
GB
34.0<br />
<strong>Safety</strong> <strong>data</strong> <strong>sheet</strong><br />
according to 1907/2006/EC, Article 31<br />
Page 6/8<br />
Printing date 06.03.2012 Version: 6<br />
Revision: 06.03.2012<br />
Trade name: Ena Tender Metal Primer Bonding<br />
(Contd. of page 5)<br />
· Bioaccumulative potential No further relevant information available.<br />
· Mobility in soil No further relevant information available.<br />
· Additional ecological information:<br />
· General notes:<br />
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.<br />
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage<br />
system.<br />
· Results of PBT and vPvB assessment<br />
· PBT: Not applicable.<br />
· vPvB: Not applicable.<br />
· Other adverse effects No further relevant information available.<br />
13 Disposal considerations<br />
· Waste treatment methods<br />
· Recommendation<br />
Must be specially treated adhering to official regulations.<br />
Must not be disposed together with household garbage. Do not allow product to reach sewage system.<br />
· European waste catalogue<br />
07 01 04* other organic solvents, washing liquids and mother liquors<br />
· Uncleaned packaging:<br />
· Recommendation:<br />
Empty contaminated packagings thoroughly. They may be recycled after thorough and proper cleaning.<br />
Packagings that may not be cleansed are to be disposed of in the same manner as the product.<br />
· Recommended cleansing agents: Alcohol<br />
* 14 Transport information<br />
· UN-Number<br />
· ADR, IMDG, IATA UN1247<br />
· UN proper shipping name<br />
· ADR 1247 METHYL METHACRYLATE MONOMER, STABILIZED,<br />
solution<br />
· IMDG, IATA METHYL METHACRYLATE MONOMER, STABILIZED,<br />
solution<br />
· Transport hazard class(es)<br />
· ADR<br />
· Class 3 (F1) Flammable liquids.<br />
· Label 3<br />
· IMDG, IATA<br />
· Class 3 Flammable liquids.<br />
· Label 3<br />
(Contd. on page 7)<br />
GB
34.0<br />
<strong>Safety</strong> <strong>data</strong> <strong>sheet</strong><br />
according to 1907/2006/EC, Article 31<br />
Page 7/8<br />
Printing date 06.03.2012 Version: 6<br />
Revision: 06.03.2012<br />
Trade name: Ena Tender Metal Primer Bonding<br />
· Packing group<br />
· ADR, IMDG, IATA II<br />
· Environmental hazards:<br />
· Marine pollutant: No<br />
· Special precautions for user Warning: Flammable liquids.<br />
· Danger code (Kemler): 339<br />
· EMS Number: F-E,S-D<br />
· Transport in bulk according to Annex II of<br />
MARPOL73/78 and the IBC Code<br />
· Transport/Additional information:<br />
· ADR<br />
· Tunnel restriction code D/E<br />
Not applicable.<br />
(Contd. of page 6)<br />
· UN "Model Regulation": UN1247, METHYL ME THA CR YLA TE M ONOME R,<br />
STABILIZED, solution, 3, II<br />
15 Regulatory information<br />
· <strong>Safety</strong>, health and environmental regulations/legislation specific for the substance or mixture<br />
· National regulations<br />
· Information about limitation of use:<br />
Employment restrictions concerning juveniles must be observed.<br />
Employment restrictions concerning pregnant and lactating women must be observed.<br />
· Technical instructions (air):<br />
Class Share in %<br />
NK 75-100<br />
· Waterhazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.<br />
· Chemical safety assessment: A Chemical <strong>Safety</strong> Assessment has not been carried out.<br />
* 16 Other information<br />
This information is based on our present knowledge. However, this shall not constitute a guarantee for any<br />
specific product features and shall not establish a legally valid contractual relationship.<br />
· Relevant phrases<br />
H225 Highly flammable liquid and vapour.<br />
H315 Causes skin irritation.<br />
H317 May cause an allergic skin reaction.<br />
H335 May cause respiratory irritation.<br />
R11 Highly flammable.<br />
R37/38 Irritating to respiratory system and skin.<br />
R43 May cause sensitisation by skin contact.<br />
· Department issuing MSDS: <strong>Micerium</strong> S.p.a.<br />
· Contact: Dr. Eugenio Miceli<br />
· Abbreviations and acronyms:<br />
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International<br />
Carriage of Dangerous Goods by Road)<br />
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the<br />
International Transport of Dangerous Goods by Rail)<br />
IMDG: International Maritime Code for Dangerous Goods<br />
IATA: International Air Transport Association<br />
ICAO: International Civil Aviation Organization<br />
(Contd. on page 8)<br />
GB
34.0<br />
<strong>Safety</strong> <strong>data</strong> <strong>sheet</strong><br />
according to 1907/2006/EC, Article 31<br />
Page 8/8<br />
Printing date 06.03.2012 Version: 6<br />
Revision: 06.03.2012<br />
Trade name: Ena Tender Metal Primer Bonding<br />
GHS: Globally Harmonized System of Classification and Labelling of Chemicals<br />
LC50: Lethal concentration, 50 percent<br />
LD50: Lethal dose, 50 percent<br />
· * Data compared to the previous version altered.<br />
(Contd. of page 7)<br />
GB
34.0<br />
Ficha de datos de seguridad<br />
según 1907/2006/CE, Artículo 31<br />
página: 1/8<br />
fecha de impresión 06.03.2012 Número de versión 6<br />
Revisión: 06.03.2012<br />
* 1 Identificación de la sustancia o la mezcla y de la sociedad o la empresa<br />
· Identificador del producto<br />
· Nombre comercial: Ena Tender Metal Primer Bonding<br />
· Número del artículo: ETBOND ETBOND-2<br />
· Usos pertinentes identificados de la sustancia o de la mezcla y usos desaconsejados<br />
· Utilización del producto / de la elaboración Material dental de bonding<br />
· Datos del proveedor de la ficha de datos de seguridad<br />
· Fabricante/distribuidor:<br />
<strong>Micerium</strong> spa., Via G. Marconi, 83 - 16036 Avegno (GE), Italy, Tel.: +39-0185-7887870, Fax: +39-0185-<br />
7887970<br />
· Área de información: Dr. Eugenio Miceli<br />
· Teléfono de emergencia:<br />
San Martino Hospital Centro de Toxilologia (Genua, Italia) Tel.: +39-010-352808 (24 horas)<br />
* 2 Identificación de los peligros<br />
· Clasificación de la sustancia o de la mezcla<br />
· Clasificación con arreglo al Reglamento (CE) n° 1272/2008<br />
GHS02 llama<br />
Flam. Liq. 2 H225 Líquido y vapores muy inflamables.<br />
GHS07<br />
Skin Irrit. 2 H315 Provoca irritación cutánea.<br />
Skin Sens. 1 H317 Puede provocar una reacción alérgica en la piel.<br />
STOT SE 3 H335 Puede irritar las vías respiratorias.<br />
· Clasificación con arreglo a la Directiva 67/548/CEE o Directiva 1999/45/CE<br />
Xi; Irritante<br />
R37/38: Irrita las vías respiratorias y la piel.<br />
Xi; Sensibilizante<br />
R43: Posibilidad de sensibilización en contacto con la piel.<br />
F; Fácilmente inflamable<br />
R11: Fácilmente inflamable.<br />
· Indicaciones adicionales sobre los riesgos para personas y el medio ambiente:<br />
Es obligatorio identificar el producto según el procedimiento de cálculo de la última versión válida de la<br />
"Directiva general de clasificación de preparaciones de la UE".<br />
· Sistema de clasificación:<br />
La clasificación corresponde a las listas actuales de la CE, pero siempre completada por la literatura<br />
especializada y los informes de las empresas.<br />
· Elementos de la etiqueta<br />
· Etiquetado con arreglo al Reglamento (CE) n° 1272/2008<br />
El producto se ha clasificado y etiquetado de conformidad con el reglamento CLP.<br />
· Pictogramas de peligro GHS02, GHS07<br />
· Palabra de advertencia Peligro<br />
· Componentes peligrosos a indicar en el etiquetaje:<br />
metacrilato de metilo<br />
· Indicaciónes de peligro<br />
H225 Líquido y vapores muy inflamables.<br />
H315 Provoca irritación cutánea.<br />
H317 Puede provocar una reacción alérgica en la piel.<br />
( se continua en página 2 )<br />
ES
34.0<br />
Ficha de datos de seguridad<br />
según 1907/2006/CE, Artículo 31<br />
página: 2/8<br />
fecha de impresión 06.03.2012 Número de versión 6<br />
Revisión: 06.03.2012<br />
Nombre comercial: Ena Tender Metal Primer Bonding<br />
( se continua en página 1 )<br />
H335 Puede irritar las vías respiratorias.<br />
· Consejos de prudencia<br />
P210<br />
Mantener alejado de fuentes de calor, chispas, llama abierta o superficies calientes. - No<br />
fumar.<br />
P241<br />
Utilizar un material eléctrico, de ventilación o de iluminación/antideflagrante.<br />
P303+P361+P353 EN CASO DE CONTACTO CON LA PIEL (o el pelo): Quitarse inmediatamente las<br />
prendas contaminadas. Aclararse la piel con agua o ducharse.<br />
P321<br />
Se necesita un tratamiento específico (ver en esta etiqueta).<br />
P405<br />
Guardar bajo llave.<br />
P501<br />
Eliminar el contenido o el recipiente conforme a la reglamentación local/regional/<br />
nacional/internacional.<br />
· Otros peligros<br />
· Resultados de la valoración PBT y mPmB<br />
· PBT: No aplicable.<br />
· mPmB: No aplicable.<br />
3 Composición/información sobre los componentes<br />
· Caracterización química: Mezclas<br />
· Descripción: Mezcla formada por las substancias especificadas a continuación con adiciones no peligrosas.<br />
· Componentes peligrosos:<br />
CAS: 80-62-6<br />
EINECS: 201-297-1<br />
metacrilato de metilo<br />
Xi R37/38; Xi R43; F R11<br />
Flam. Liq. 2, H225; Skin Irrit. 2, H315; Skin Sens. 1, H317; STOT<br />
SE 3, H335<br />
· Indicaciones adicionales:<br />
El texto de los posibles riesgos aquí indicados se puede consultar en el capítulo 16.<br />
75-100%<br />
4 Primeros auxilios<br />
· Descripción de los primeros auxilios<br />
· Instrucciones generales: Quitarse de inmediato toda prenda contaminada con el producto.<br />
· En caso de inhalación del producto:<br />
Llevar la persona afectada al aire libre y tenderla para que permanezca en reposo.<br />
Prestar asistencia médica a la(s) persona(s) afectada(s).<br />
· En caso de contacto con la piel:<br />
Lavar inmediatamente con agua y jabón y enjuagar bien.<br />
En caso de irritaciones continuas de la piel, consultar un médico.<br />
· En caso de con los ojos:<br />
Limpiar los ojos abiertos durante varios minutos con agua corriente. En caso de trastornos persistentes<br />
consultar un médico.<br />
· En caso de ingestión:<br />
Enjuagar la boca y beber mucha agua.<br />
No provocar el vómito y solicitar asistencia médica inmediata.<br />
· Indicaciones para el médico:<br />
· Principales síntomas y efectos, agudos y retardados No existen más datos relevantes disponibles.<br />
· Indicación de toda atención médica y de los tratamientos especiales que deban dispensarse inmediatamente<br />
No existen más datos relevantes disponibles.<br />
5 Medidas de lucha contra incendios<br />
· Medios de extinción<br />
· Sustancias extintoras apropiadas:<br />
Espuma<br />
Polvo extintor<br />
( se continua en página 3 )<br />
ES
34.0<br />
Ficha de datos de seguridad<br />
según 1907/2006/CE, Artículo 31<br />
página: 3/8<br />
fecha de impresión 06.03.2012 Número de versión 6<br />
Revisión: 06.03.2012<br />
Nombre comercial: Ena Tender Metal Primer Bonding<br />
( se continua en página 2 )<br />
Dióxido de carbono CO2<br />
· Sustancias extintoras inapropiadas por razones de seguridad: Agua a pleno chorro<br />
· Peligros específicos derivados de la sustancia o la mezcla No existen más datos relevantes disponibles.<br />
· Recomendaciones para el personal de lucha contra incendios<br />
· Equipo especial de protección: Llevar puesto un aparato de respiración autónomo.<br />
· Indicaciones adicionales<br />
Refrigerar los depósitos en peligro con chorro de agua rociada.<br />
El agua de extinción contaminada debe recogerse por separado y no debe ser vertida al alcantarillado.<br />
6 Medidas en caso de vertido accidental<br />
· Precauciones personales, equipo de protección y procedimientos de emergencia<br />
Asegurarse de que haya suficiente ventilación.<br />
Llevar puesto equipo de protección. Mantener alejadas las personas sin protección.<br />
Mantener alejadas las fuentes de encendido.<br />
Ante la presencia de vapores /polvo /aerosoles, utilizar protección respiratoria.<br />
· Precauciones relativas al medio ambiente:<br />
Evitar que penetre en la canalización /aguas de superficie /agua subterráneas.<br />
· Métodos y material de contención y de limpieza:<br />
Quitar con material absorbente (arena, kieselgur, aglutinante de ácidos, aglutinante universal, aserrín).<br />
Desechar el material contaminado como vertido según item 13.<br />
· Referencia a otras secciones<br />
Ver capítulo 7 para mayor información sobre una manipulación segura.<br />
Ver capítulo 8 para mayor información sobre el equipo personal de protección.<br />
Para mayor información sobre cómo desechar el producto, ver capítulo 13.<br />
7 Manipulación y almacenamiento<br />
· Manipulación:<br />
· Precauciones para una manipulación segura Mantener el depósito cerrado herméticamente.<br />
· Prevención de incendios y explosiones:<br />
Mantener alejadas las fuentes de encendido. No fumar.<br />
Tomar medidas contra las cargas electrostáticas.<br />
· Condiciones de almacenamiento seguro, incluidas posibles incompatibilidades<br />
· Almacenamiento:<br />
· Exigencias con respecto al almacén y los recipientes:<br />
Almacenar en un lugar fresco.<br />
Cierre el envase inmedidiamente despues de su uso y proteger el producto de la incidencia de la luz.<br />
De almacenamiento entre 15 °C y 30 °C en un lugar seco y bien ventilado. Evitar al calatamiento del<br />
material a más de 50 °C y de refrigeracion por debajo de 5 °C.<br />
· Normas en caso de un almacenamiento conjunto: No almacenar junto con alimentos.<br />
· Indicaciones adicionales sobre las condiciones de almacenamiento:<br />
Proteger del calor y de la luz directa del sol.<br />
· Usos específicos finales No existen más datos relevantes disponibles.<br />
* 8 Controles de exposición/protección individual<br />
· Instrucciones adicionales para el acondicionamiento de instalaciones técnicas:<br />
Sin datos adicionales, ver punto 7.<br />
( se continua en página 4 )<br />
ES
34.0<br />
Ficha de datos de seguridad<br />
según 1907/2006/CE, Artículo 31<br />
página: 4/8<br />
fecha de impresión 06.03.2012 Número de versión 6<br />
Revisión: 06.03.2012<br />
Nombre comercial: Ena Tender Metal Primer Bonding<br />
( se continua en página 3 )<br />
· Parámetros de control<br />
· Componentes con valores límite admisibles que deben controlarse en el puesto de trabajo:<br />
80-62-6 metacrilato de metilo<br />
LEP Valor de corta duración: 100 ppm<br />
Valor de larga duración: 50 ppm<br />
Sen, VLI<br />
· Indicaciones adicionales: Como base se han utilizado las listas vigentes en el momento de la elaboración.<br />
· Controles de la exposición<br />
· Equipo de protección individual:<br />
· Medidas generales de protección e higiene:<br />
Quitarse de inmediato la ropa ensuciada o impregnada.<br />
Lavarse las manos antes de las pausas y al final del trabajo.<br />
No respirar los gases /vapores /aerosoles.<br />
Evitar el contacto con los ojos y la piel.<br />
· Protección respiratoria:<br />
Si el local está bien ventilado, no es necesario.<br />
Si las concentraciones son elevadas, llevar protección respiratoria.<br />
Aparato filtrador para uso breve:<br />
Filtro AX<br />
· Protección de manos: Guantes / resistentes a los disolventes<br />
· Material de los guantes Caucho butílico<br />
· Tiempo de penetración del material de los guantes<br />
El tiempo de resistencia a la penetración exacto deberá ser pedido al fabricante de los guantes. Este tiempo<br />
debe ser respetado.<br />
· Protección de ojos: Gafas de protección<br />
· Protección del cuerpo:<br />
Ropa protectora resistente a los disolventes<br />
(Sólo cuando se manejan grandes cantidades)<br />
9 Propiedades físicas y químicas<br />
· Información sobre propiedades físicas y químicas básicas<br />
· Datos generales<br />
· Aspecto:<br />
Forma:<br />
Líquido<br />
Color:<br />
Incoloro<br />
· Olor: Característico<br />
· Umbral olfativo: No determinado.<br />
· valor pH: Not determined<br />
· Cambio de estado<br />
Punto de fusión /campo de fusión: -48°C<br />
Punto de ebullición /campo de ebullición: 101°C<br />
· Punto de inflamación: 10°C<br />
· Inflamabilidad (sólido, gaseiforme): No aplicable.<br />
· Temperatura de ignición: 430°C<br />
· Temperatura de descomposición: No determinado.<br />
· Autoinflamabilidad: El producto no es autoinflamable.<br />
· Peligro de explosión: El producto no es explosivo; sin embargo, pueden formarse<br />
mezclas explosivas de vapor / aire.<br />
( se continua en página 5 )<br />
ES
34.0<br />
Ficha de datos de seguridad<br />
según 1907/2006/CE, Artículo 31<br />
página: 5/8<br />
fecha de impresión 06.03.2012 Número de versión 6<br />
Revisión: 06.03.2012<br />
Nombre comercial: Ena Tender Metal Primer Bonding<br />
· Límites de explosión:<br />
Inferior: 2,1 Vol %<br />
Superior: 12,5 Vol %<br />
· Presión de vapor a 20°C: 47 hPa<br />
· Densidad a 20°C: 0,94 g/cm³<br />
· Densidad relativa No determinado.<br />
· Densidad de vapor No determinado.<br />
· Velocidad de evaporación No determinado.<br />
· Solubilidad en / miscibilidad con<br />
agua a 20°C:<br />
1,6 g/l<br />
· Coeficiente de reparto (n-octanol/agua): No determinado.<br />
· Viscosidad:<br />
Dinámica:<br />
Cinemática:<br />
Indeterminado<br />
Indeterminado<br />
· Concentración del disolvente:<br />
Disolventes orgánicos: 0,0 %<br />
· Información adicional No existen más datos relevantes disponibles.<br />
( se continua en página 4 )<br />
10 Estabilidad y reactividad<br />
· Reactividad<br />
· Estabilidad química<br />
· Descomposición térmica / condiciones que deben evitarse: No se descompone al emplearse adecuadamente.<br />
· Posibilidad de reacciones peligrosas Polimerización con generación de calor.<br />
· Condiciones que deben evitarse No existen más datos relevantes disponibles.<br />
· Materiales incompatibles:<br />
En presencia de sustancias radicales (por ejemplo, peroxidos), agentes reductores y/o iones, de metales<br />
pesados, es posible la polimerizacion con liberacion de color.<br />
· Productos de descomposición peligrosos: No se conocen productos de descomposición peligrosos.<br />
11 Información toxicológica<br />
· Información sobre los efectos toxicológicos<br />
· Toxicidad aguda:<br />
· Valores LD/LC50 (dosis letal /dosis letal = 50%) relevantes para la clasificación:<br />
metil metacrilate LD-50 oral >5000 mg /kg rat (Lit.)<br />
LD-50 por inhalacion 7093 ppm/4h rat (Lit.)<br />
· Efecto estimulante primario:<br />
· en la piel: Irrita la piel y las mucosas.<br />
· en el ojo: Ligermente irritante<br />
· Sensibilización: Posible sensibilización al entrar en contacto con la piel.<br />
· Indicaciones toxicológicas adicionales:<br />
En conformidad con el procedimiento de cálculo contenido en la última versión de la Normativa General de<br />
Clasificación de la CE para Preparados, el producto tiene los siguientes riesgos:<br />
Irritante<br />
12 Información ecológica<br />
· Toxicidad<br />
· Toxicidad acuática: No existen más datos relevantes disponibles.<br />
( se continua en página 6 )<br />
ES
34.0<br />
Ficha de datos de seguridad<br />
según 1907/2006/CE, Artículo 31<br />
página: 6/8<br />
fecha de impresión 06.03.2012 Número de versión 6<br />
Revisión: 06.03.2012<br />
Nombre comercial: Ena Tender Metal Primer Bonding<br />
· Tipo de test Concentración efectiva Método Evaluación<br />
Toxicidad para los pesces: LC-50 >79 mg/l OECD 203<br />
(MMA) NOEC: 40 mg/l ISO 7346<br />
Tiempo: 96 h EEC84<br />
Especies: 449 V, C1<br />
Oncorhynchus mykiss<br />
( se continua en página 5 )<br />
Toxicidad para las micro organisms: ECO: 100 mg/l a partir de inhibicion del crecimiento<br />
celular (MMA) Especies:<br />
Pseudomonas putida<br />
· Persistencia y degradabilidad No existen más datos relevantes disponibles.<br />
· Comportamiento en sistemas ecológicos:<br />
· Componentes:<br />
Metacrilato de metilo Biodegradabilidad: 30,7 %<br />
Tiempo: 28 d<br />
Método:<br />
OECD 301 C<br />
Valoracion: difficil de descomponer<br />
· Potencial de bioacumulación No existen más datos relevantes disponibles.<br />
· Movilidad en el suelo No existen más datos relevantes disponibles.<br />
· Indicaciones medioambientales adicionales:<br />
· Indicaciones generales:<br />
Nivel de riesgo para el agua 1 (autoclasificación): escasamente peligroso para el agua<br />
En estado no diluido o no neutralizado, no dejar que se infiltre en aguas subterráneas, aguas superficiales o<br />
en alcantarillados.<br />
· Resultados de la valoración PBT y mPmB<br />
· PBT: No aplicable.<br />
· mPmB: No aplicable.<br />
· Otros efectos adversos No existen más datos relevantes disponibles.<br />
13 Consideraciones relativas a la eliminación<br />
· Métodos para el tratamiento de residuos<br />
· Recomendación:<br />
Debe ser sometido a un tratamiento especial conforme a las normativas oficiales.<br />
No debe desecharse con la basura doméstica. No debe llegar al alcantarillado.<br />
· Catálogo europeo de residuos<br />
07 01 04* Otros disolventes, líquidos de limpieza y licores madre orgánicos<br />
· Embalajes sin limpiar:<br />
· Recomendación:<br />
Los envases o embalajes deben vaciarse de forma óptima, y pueden ser reutilizados tras limpiarlos<br />
adecuadamente.<br />
Los embalajes que no se pueden limpiar, deben desecharse de la misma manera que la sustancia.<br />
· Producto de limpieza recomendado: Alcohol<br />
14 Información relativa al transporte<br />
· Número UN<br />
· ADR, IMDG, IATA UN1247<br />
· Designación oficial de transporte de las Naciones Unidas<br />
· ADR 1247 METACRILATO DE METILO MONÓMERO,<br />
ESTABILIZADO, Solución<br />
· IMDG, IATA METHYL METHACRYLATE MONOMER, STABILIZED,<br />
solution<br />
( se continua en página 7 )<br />
ES
34.0<br />
Ficha de datos de seguridad<br />
según 1907/2006/CE, Artículo 31<br />
página: 7/8<br />
fecha de impresión 06.03.2012 Número de versión 6<br />
Revisión: 06.03.2012<br />
Nombre comercial: Ena Tender Metal Primer Bonding<br />
· Clase(s) de peligro para el transporte<br />
· ADR<br />
( se continua en página 6 )<br />
· Clase 3 (F1) Líquidos inflamables<br />
· Etiqueta 3<br />
· IMDG, IATA<br />
· Class 3 Flammable liquids.<br />
· Label 3<br />
· Grupo de embalaje<br />
· ADR, IMDG, IATA II<br />
· Peligros para el medio ambiente:<br />
· Contaminante marino: No<br />
· Precauciones particulares para los usuarios Atención: Líquidos inflamables<br />
· Número Kemler: 339<br />
· Número EMS: F-E,S-D<br />
· Transporte a granel con arreglo al anexo II del<br />
Convenio Marpol 73/78 y del Código IBC<br />
· Transporte/datos adicionales:<br />
· ADR<br />
· Código de restricción del túnel D/E<br />
No aplicable.<br />
· "Reglamentación Modelo" de la UNECE: UN1247, METACRILATO DE METILO MONÓMERO,<br />
ESTABILIZADO, Solución, 3, II<br />
15 Información reglamentaria<br />
· Reglamentación y legislación en materia de seguridad, salud y medio ambiente específicas para la<br />
sustancia o la mezcla<br />
· Disposiciones nacionales:<br />
· Indicaciones sobre las limitaciones de trabajo:<br />
Tener en cuenta las limitaciones de empleo para los jóvenes.<br />
Tener en cuenta las limitaciones de empleo para las mujeres embarazadas o en período de lactancia.<br />
· Clase de peligro para las aguas:<br />
Clase contenido en %<br />
NK 75-100<br />
· Clase de peligro para las aguas: CPA 1 (autoclasificación): poco peligroso para el agua.<br />
· Evaluación de la seguridad química: Una evaluación de la seguridad química no se ha llevado a cabo.<br />
ES<br />
( se continua en página 8 )
34.0<br />
Ficha de datos de seguridad<br />
según 1907/2006/CE, Artículo 31<br />
página: 8/8<br />
fecha de impresión 06.03.2012 Número de versión 6<br />
Revisión: 06.03.2012<br />
Nombre comercial: Ena Tender Metal Primer Bonding<br />
( se continua en página 7 )<br />
16 Otra información<br />
Los datos se fundan en el estado actual de nuestros conocimientos, pero no constituyen garantía alguna de<br />
cualidades del producto y no generan ninguna relación jurídica contratual.<br />
· Frases relevantes<br />
H225 Líquido y vapores muy inflamables.<br />
H315 Provoca irritación cutánea.<br />
H317 Puede provocar una reacción alérgica en la piel.<br />
H335 Puede irritar las vías respiratorias.<br />
R11 Fácilmente inflamable.<br />
R37/38 Irrita las vías respiratorias y la piel.<br />
R43 Posibilidad de sensibilización en contacto con la piel.<br />
· Persona de contacto: <strong>Micerium</strong> S.p.a.<br />
· Interlocutor: Dr. Eugenio Miceli<br />
· Abreviaturas y acrónimos:<br />
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International<br />
Carriage of Dangerous Goods by Road)<br />
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the<br />
International Transport of Dangerous Goods by Rail)<br />
IMDG: International Maritime Code for Dangerous Goods<br />
IATA: International Air Transport Association<br />
ICAO: International Civil Aviation Organization<br />
GHS: Globally Harmonized System of Classification and Labelling of Chemicals<br />
LC50: Lethal concentration, 50 percent<br />
LD50: Lethal dose, 50 percent<br />
· * Datos modificados en relación a la versión anterior<br />
ES
34.0<br />
Fiche de données de sécurité<br />
selon 1907/2006/CE, Article 31<br />
Page : 1/8<br />
Date d'impression : 06.03.2012 Version: 6<br />
Révision: 06.03.2012<br />
* 1 Identification de la substance/du mélange et de la société/l'entreprise<br />
· Identificateur de produit<br />
· Nom du produit Ena Tender Metal Primer Bonding<br />
· Code du produit ETBOND ETBOND-2<br />
· Utilisations identifiées pertinentes de la substance ou du mélange et utilisations déconseillées<br />
· Emploi de la substance / de la préparation Matériel d'adhésivité dentaire<br />
· Renseignements concernant le fournisseur de la fiche de données de sécurité<br />
· Producteur/fournisseur :<br />
<strong>Micerium</strong> spa., Via G. Marconi, 83 - 16036 Avegno (GE), Italy, Tel.: +39-0185-7887870, Fax: +39-0185-<br />
7887970<br />
· Service chargé des renseignements : Dr. Eugenio Miceli<br />
· Numéro d'appel d'urgence:<br />
San Martino Hospital Poison Control Center (Genua, Italia) Tel.: +39-010-352808 (24 heures)<br />
2 Identification des dangers<br />
· Classification de la substance ou du mélange<br />
· Classification selon le règlement (CE) n° 1272/2008<br />
GHS02 flamme<br />
Flam. Liq. 2 H225 Liquide et vapeurs très inflammables.<br />
GHS07<br />
Skin Irrit. 2 H315 Provoque une irritation cutanée.<br />
Skin Sens. 1 H317 Peut provoquer une allergie cutanée.<br />
STOT SE 3 H335 Peut irriter les voies respiratoires.<br />
· Classification selon la directive 67/548/CEE ou directive 1999/45/CE<br />
Xi; Irritant<br />
R37/38: Irritant pour les voies respiratoires et la peau.<br />
Xi; Sensibilisant<br />
R43: Peut entraîner une sensibilisation par contact avec la peau.<br />
F; Facilement inflammable<br />
R11: Facilement inflammable.<br />
· Indications particulières concernant les dangers pour l'homme et l'environnement:<br />
Le produit est à étiqueter, conformément au procédé de calcul de la "Directive générale de classification<br />
pour les préparations de la CE", dans la dernière version valable.<br />
· Système de classification:<br />
La classification correspond aux listes CEE actuelles, mais est complétée par des indications tirées de<br />
publications spécialisées et des indications fournies par l'entreprise.<br />
· Éléments d'étiquetage<br />
· Etiquetage selon le règlement (CE) n° 1272/2008 Le produit est classifié et étiqueté selon le règlement CLP.<br />
· Pictogrammes de danger GHS02, GHS07<br />
· Mention d'avertissement Danger<br />
· Composants dangereux déterminants pour l'étiquetage:<br />
méthacrylate de méthyle<br />
· Mentions de danger<br />
H225 Liquide et vapeurs très inflammables.<br />
H315 Provoque une irritation cutanée.<br />
H317 Peut provoquer une allergie cutanée.<br />
H335 Peut irriter les voies respiratoires.<br />
(suite page 2)<br />
FR
34.0<br />
Fiche de données de sécurité<br />
selon 1907/2006/CE, Article 31<br />
Page : 2/8<br />
Date d'impression : 06.03.2012 Version: 6<br />
Révision: 06.03.2012<br />
Nom du produit Ena Tender Metal Primer Bonding<br />
(suite de la page 1)<br />
· Conseils de prudence<br />
P210<br />
Tenir à l'écart de la chaleur/des étincelles/des flammes nues/des surfaces chaudes. - Ne<br />
pas fumer.<br />
P241<br />
Utiliser du matériel électrique/de ventilation/d'éclairage/antidéflagrant.<br />
P303+P361+P353 EN CAS DE CONTACT AVEC LA PEAU (ou les cheveux): enlever immédiatement les<br />
vêtements contaminés. Rincer la peau à l'eau/se doucher.<br />
P321<br />
Traitement spécifique (voir sur cette étiquette).<br />
P405<br />
Garder sous clef.<br />
P501<br />
Éliminer le contenu/récipient conformément à la réglementation locale/régionale/<br />
nationale/internationale.<br />
· Autres dangers<br />
· Résultats des évaluations PBT et vPvB<br />
· PBT: Non applicable.<br />
· vPvB: Non applicable.<br />
3 Composition/informations sur les composants<br />
· Caractérisation chimique: Mélanges<br />
· Description :<br />
Mélange effectué à partir des matériaux mentionnés ci - après et avec des additifs non dangereux<br />
· Composants dangereux:<br />
CAS: 80-62-6 méthacrylate de méthyle<br />
75-100%<br />
EINECS: 201-297-1 Xi R37/38; Xi R43; F R11<br />
Flam. Liq. 2, H225; Skin Irrit. 2, H315; Skin Sens. 1, H317; STOT<br />
SE 3, H335<br />
· Indications complémentaires : Pour le libellé des phrases de risque citées, se référer au chapitre 16.<br />
* 4 Premiers secours<br />
· Description des premiers secours<br />
· Remarques générales : Eloigner immédiatement les vêtements contaminés par le produit.<br />
· après inhalation :<br />
Amener les sujets à l'air frais et les garder au calme<br />
Recourir à un traitement médical<br />
· après contact avec la peau :<br />
Laver immédiatement à l'eau et au savon et bien rincer.<br />
En cas d'irritation persistante de la peau, consulter un médecin<br />
· après contact avec les yeux :<br />
Lavage avec de l'eau en écartant les paupières plusieurs minutes. Si les troubles persistent, consulter un<br />
médecin.<br />
· après ingestion :<br />
Rincer la bouche et boire ensuite abondamment<br />
Ne pas faire vomir, demander d'urgence une assistance médicale.<br />
· Indications destinées au médecin :<br />
· Principaux symptômes et effets, aigus et différés Pas d'autres informations importantes disponibles.<br />
· Indication des éventuels soins médicaux immédiats et traitements particuliers nécessaires<br />
Pas d'autres informations importantes disponibles.<br />
5 Mesures de lutte contre l'incendie<br />
· Moyens d'extinction<br />
· Moyens d'extinction:<br />
Mousse<br />
Poudre d'extinction<br />
Dioxyde de carbone<br />
(suite page 3)<br />
FR
34.0<br />
Fiche de données de sécurité<br />
selon 1907/2006/CE, Article 31<br />
Page : 3/8<br />
Date d'impression : 06.03.2012 Version: 6<br />
Révision: 06.03.2012<br />
Nom du produit Ena Tender Metal Primer Bonding<br />
(suite de la page 2)<br />
· Produits extincteurs déconseillés pour des raisons de sécurité : Jet d'eau à grand débit.<br />
· Dangers particuliers résultant de la substance ou du mélange<br />
Pas d'autres informations importantes disponibles.<br />
· Conseils aux pompiers<br />
· Equipement spécial de sécurité : Porter un appareil de respiration indépendant de l'air ambiant<br />
· Autres indications<br />
Rafraîchir les emballages dangereux en pulvérisant de l'eau<br />
Rassembler séparément l'eau d'extinction contaminée, ne pas l'envoyer dans les canalisations<br />
6 Mesures à prendre en cas de dispersion accidentelle<br />
· Précautions individuelles, équipement de protection et procédures d'urgence<br />
Veiller à une aération suffisante<br />
Porter un équipement de sécurité. Eloigner les personnes non protégées.<br />
Tenir éloignées les sources d'incendie<br />
En cas d'action exercée par des vapeurs, de la poussière ou un aérosol, utiliser un appareil de protection<br />
respiratoire<br />
· Précautions pour la protection de l'environnement:<br />
Ne pas rejeter dans les canalisations, dans l'eau de ruissellement ni dans les nappes d'eau souterraines<br />
· Méthodes et matériel de confinement et de nettoyage:<br />
Recueillir les liquides à l'aide d'un produit absorbant (sable, kieselguhr, neutralisant d'acide, liant universel,<br />
sciure).<br />
Evacuer les matériaux contaminés en tant que déchets conformément au point 13.<br />
* 7 Manipulation et stockage<br />
· Manipulation :<br />
· Précautions à prendre pour une manipulation sans danger Tenir les emballages hermétiquement fermés<br />
· Préventions des incendies et des explosions:<br />
Tenir à l'abri de sources d'inflammation - ne pas fumer.<br />
Prendre des mesures contre une charge électrostatique.<br />
· Conditions d'un stockage sûr, y compris d'éventuelles incompatibilités<br />
· Stockage :<br />
· Exigences concernant les lieux et conteneurs de stockage :<br />
Stocker dans un endroit frais.<br />
Fermer le récipient immédiatement après utilisisation, et bien le protéger de la lumière.<br />
De stockage entre 15 °C et 30 °C dans un endroit sec et bien ventile. Eviter de chauffeur le materiaua a plus<br />
de 50 °C et refroidssement au dessous de 5 °C.<br />
· Indications concernant le stockage commun : Ne pas stocker avec les aliments<br />
· Autres indications sur les conditions de stockage :<br />
Protéger de la forte chaleur et du rayonnement direct du soleil<br />
· Utilisation(s) finale(s) particulière(s) Pas d'autres informations importantes disponibles.<br />
* 8 Contrôles de l'exposition/protection individuelle<br />
· Indications complémentaires pour l'agencement des installations techniques :<br />
Sans autre indication, voir point 7.<br />
· Paramètres de contrôle<br />
· Composants présentant des valeurs-seuil à surveiller par poste de travail :<br />
80-62-6 méthacrylate de méthyle<br />
VME Valeur momentanée: 820 mg/m³, 200 ppm<br />
Valeur à long terme: 410 mg/m³, 100 ppm<br />
(suite page 4)<br />
FR
34.0<br />
Fiche de données de sécurité<br />
selon 1907/2006/CE, Article 31<br />
Page : 4/8<br />
Date d'impression : 06.03.2012 Version: 6<br />
Révision: 06.03.2012<br />
Nom du produit Ena Tender Metal Primer Bonding<br />
· Remarques supplémentaires :<br />
Le présent document s'appuie sur les listes en vigueur au moment de son élaboration.<br />
· Contrôles de l'exposition<br />
· Equipement de protection individuel :<br />
· Mesures générales de protection et d'hygiène :<br />
Retirer immédiatement les vêtements souillés ou humectés.<br />
Se laver les mains avant les pauses et en fin de travail.<br />
Ne pas inhaler les gaz, les vapeurs et les aérosols<br />
Eviter tout contact avec les yeux et avec la peau<br />
· Protection respiratoire :<br />
Ne pas nécessaire si la pièce dispose d'une bonne ventilation.<br />
Protection respiratoire en cas de fortes concentrations<br />
A titre provisoire, filtre :<br />
Filtre AX.<br />
· Protection des mains : Gants résistant aux solvants<br />
· Matériau des gants Butylcaoutchouc<br />
· Temps de pénétration du matériau des gants<br />
Le temps de pénétration exact est à déterminer par le fabricant des gants de protection et à respecter.<br />
· Protection des yeux : Lunettes de protection.<br />
· Protection du corps :<br />
Vêtement de protection résistant aux solvants<br />
(Seulemant lord de la manipulation de grandes quantites)<br />
(suite de la page 3)<br />
9 Propriétés physiques et chimiques<br />
· Informations sur les propriétés physiques et chimiques essentielles<br />
· Indications générales.<br />
· Aspect:<br />
Forme :<br />
liquide<br />
Couleur :<br />
incolore<br />
· Odeur : caractéristique<br />
· Seuil olfactif: Non déterminé.<br />
· valeur du pH: non déterminé<br />
· Modification d'état<br />
Point de fusion :<br />
-48°C<br />
Point d'ébullition : 101°C<br />
· Point d'éclair 10°C<br />
· Inflammabilité (solide, gazeux) : Non applicable.<br />
· Température d'inflammation : 430°C<br />
· Température de décomposition : Non déterminé.<br />
· Auto-imflammation : Le produit ne s'enflamme pas spontanément.<br />
· Danger d'explosion : Le produit n'est pas explosif; toutefois, des mélanges explosifs<br />
vapeur-air peuvent se former.<br />
· Limites d'explosion :<br />
inférieure : 2,1 Vol %<br />
supérieure : 12,5 Vol %<br />
· Pression de vapeur à 20°C: 47 hPa<br />
· Densité à 20°C: 0,94 g/cm³<br />
· Densité relative. Non déterminé.<br />
· Densité de vapeur. Non déterminé.<br />
(suite page 5)<br />
FR
34.0<br />
Fiche de données de sécurité<br />
selon 1907/2006/CE, Article 31<br />
Page : 5/8<br />
Date d'impression : 06.03.2012 Version: 6<br />
Révision: 06.03.2012<br />
Nom du produit Ena Tender Metal Primer Bonding<br />
· Vitesse d'évaporation. Non déterminé.<br />
· Solubilité dans/miscibilité avec<br />
l'eau à 20°C:<br />
1,6 g/l<br />
· Coefficient de partage (n-octanol/eau) : Non déterminé.<br />
· Viscosité :<br />
dynamique :<br />
cinématique :<br />
non déterminé<br />
non déterminé<br />
· Teneur en solvants :<br />
solvants organiques 0,0 %<br />
· Autres informations Pas d'autres informations importantes disponibles.<br />
(suite de la page 4)<br />
* 10 Stabilité et réactivité<br />
· Réactivité<br />
· Stabilité chimique<br />
· Décomposition thermique / conditions à éviter : Pas de décomposition en cas d'usage conforme.<br />
· Possibilité de réactions dangereuses Polymérisation par dégagement de chaleur<br />
· Conditions à éviter Pas d'autres informations importantes disponibles.<br />
· Matières incompatibles:<br />
En présence de puissants réactifs (cx: péroxides ) matière désoxydante, et/ou de ions mètalliques, la<br />
polyméristion avec présence de chaleur est possible.<br />
· Produits de décomposition dangereux: Pas de produits de décomposition dangereux connus<br />
* 11 Informations toxicologiques<br />
· Informations sur les effets toxicologiques<br />
· Toxicité aiguë :<br />
· Valeurs LD/LC50 déterminantes pour la classification :<br />
méthacrylate de méthyle LD-50 oral >5000 mg/kg rat (lit.)<br />
LD-50 inhalatoire 7093 ppm/4h rat (lit.)<br />
· Effet primaire d'irritation :<br />
· de la peau : Irrite la peau et les muqueuses.<br />
· des yeux : Légérement irritant<br />
· Sensibilisation : Sensibilisation possible par contact avec la peau.<br />
· Indications toxicologiques complémentaires :<br />
Selon le procédé de calcul de la dernière version en vigueur de la directive générale CEE sur la classification<br />
des préparations, le produit présente les dangers suivants :<br />
Irritant<br />
12 Informations écologiques<br />
· Toxicité<br />
· Toxicité aquatique : Pas d'autres informations importantes disponibles.<br />
· Type d'essai Concentration active Méthode Evaluation<br />
Toxicité au poisson: LC-50: >79 mg/l OECD 203<br />
(MMA) NOEC: 40 mg/l ISO 7346<br />
Temps: 96 h EEC84<br />
Espèces: 449 V, C1 Oncorhynchus mykiss<br />
Toxicité aux micro-organismes<br />
(MMA) ECO: 100 mg/l Début de l'arrêt Espèces: de croissance<br />
des Pseudomonas putida cellules<br />
· Persistance et dégradabilité Pas d'autres informations importantes disponibles.<br />
(suite page 6)<br />
FR
34.0<br />
Fiche de données de sécurité<br />
selon 1907/2006/CE, Article 31<br />
Page : 6/8<br />
Date d'impression : 06.03.2012 Version: 6<br />
Révision: 06.03.2012<br />
Nom du produit Ena Tender Metal Primer Bonding<br />
(suite de la page 5)<br />
· Comportement dans des compartiments de l'environnement :<br />
· Composant :<br />
Méthacrylate de méthyle Biodégradable: 30,7 %<br />
Temps: 28 d<br />
Method: OECD 301 C<br />
Evaluation: difficile à décomposer<br />
· Potentiel de bioaccumulation Pas d'autres informations importantes disponibles.<br />
· Mobilité dans le sol Pas d'autres informations importantes disponibles.<br />
· Autres indications écologiques :<br />
· Indications générales :<br />
Catégorie de pollution des eaux 1 (D) (Classification propre) : peu polluant<br />
Ne pas laisser le produit, non dilué ou en grande quantité, pénétrer la nappe phréatique, les eaux ou les<br />
canalisations.<br />
· Résultats des évaluations PBT et VPVB<br />
· PBT: Non applicable.<br />
· vPvB: Non applicable.<br />
· Autres effets néfastes Pas d'autres informations importantes disponibles.<br />
13 Considérations relatives à l'élimination<br />
· Méthodes de traitement des déchets<br />
· Recommandation :<br />
Doit faire l'objet d'un traitement spécial conformément aux prescriptions légales.<br />
Ne doit pas être évacué avec les ordures ménagères. Ne pas laisser pénétrer dans les égouts.<br />
· Catalogue européen des déchets<br />
07 01 04* autres solvants, liquides de lavage et liqueurs mères organiques<br />
· Emballages non nettoyés :<br />
· Recommandation :<br />
Les emballages contaminés doivent être vidés aussi complètement que possible et peuvent alors, après<br />
nettoyage adéquat, faire l'objet d'une récupération.<br />
Les emballages ne pouvant pas être nettoyés doivent être évacués de même manière que le produit.<br />
· Produit de nettoyage recommandé : Alcool<br />
* 14 Informations relatives au transport<br />
· No ONU<br />
· ADR, IMDG, IATA UN1247<br />
· Nom d'expédition des Nations unies<br />
· ADR 1247 MÉTHACRYLATE DE MÉTHYLE MONOMÈRE<br />
STABILISÉ, solution<br />
· IMDG, IATA M E T H Y L M E T H A C R Y L A T E M O N O M E R ,<br />
STABILIZED, solution<br />
· Classe(s) de danger pour le transport<br />
· ADR<br />
· Classe 3 (F1) Liquides inflammables.<br />
(suite page 7)<br />
FR
34.0<br />
Fiche de données de sécurité<br />
selon 1907/2006/CE, Article 31<br />
Page : 7/8<br />
Date d'impression : 06.03.2012 Version: 6<br />
Révision: 06.03.2012<br />
Nom du produit Ena Tender Metal Primer Bonding<br />
· Étiquette 3<br />
· IMDG, IATA<br />
(suite de la page 6)<br />
· Class 3 Flammable liquids.<br />
· Label 3<br />
· Groupe d'emballage<br />
· ADR, IMDG, IATA II<br />
· Dangers pour l'environnement:<br />
· Polluant marin : Non<br />
· Précautions particulières à prendre par l'utilisateur Attention: Liquides inflammables.<br />
· Indice Kemler : 339<br />
· No EMS : F-E,S-D<br />
· Transport en vrac conformément à l'annexe II de la<br />
convention Marpol 73/78 et au recueil IBC<br />
· Indications complémentaires de transport :<br />
· ADR<br />
· Code de restriction en tunnels D/E<br />
Non applicable.<br />
· "Règlement type" de l'ONU: U N 1 2 4 7 , M É TH A C R YL A T E D E M É T HYLE<br />
MONOMÈRE STABILISÉ, solution, 3, II<br />
* 15 Informations réglementaires<br />
· Réglementations/législation particulières à la substance ou au mélange en matière de sécurité, de santé et<br />
d'environnement<br />
· Prescriptions nationales :<br />
· Indications sur les restrictions de travail :<br />
Respecter les limitations d'emploi pour les jeunes<br />
Respecter les limitations d'emploi pour les futures mères et pour celles qui allaitent<br />
· Directives techniques air :<br />
Classe Part en %<br />
NK 75-100<br />
· Classe de pollution des eaux :<br />
Classe de danger pour l'eau 1 (Classification propre) (classe de pollution des eaux 1) : peu polluant<br />
· Évaluation de la sécurité chimique: Une évaluation de la sécurité chimique n'a pas été réalisée.<br />
* 16 Autres informations<br />
Ces indications sont fondées sur l'état actuel de nos connaissances, mais ne constituent pas une garantie<br />
quant aux propriétés du produit et ne donnent pas lieu à un rapport juridique contractuel.<br />
· Phrases importantes<br />
H225 Liquide et vapeurs très inflammables.<br />
H315 Provoque une irritation cutanée.<br />
H317 Peut provoquer une allergie cutanée.<br />
H335 Peut irriter les voies respiratoires.<br />
R11<br />
Facilement inflammable.<br />
(suite page 8)<br />
FR
34.0<br />
Fiche de données de sécurité<br />
selon 1907/2006/CE, Article 31<br />
Page : 8/8<br />
Date d'impression : 06.03.2012 Version: 6<br />
Révision: 06.03.2012<br />
Nom du produit Ena Tender Metal Primer Bonding<br />
R37/38 Irritant pour les voies respiratoires et la peau.<br />
R43 Peut entraîner une sensibilisation par contact avec la peau.<br />
· Service établissant la fiche technique : <strong>Micerium</strong> S.p.a.<br />
· Contact : Dr. Eugenio Miceli<br />
· Acronymes et abréviations:<br />
ADR: Accord européen sur le transport des marchandises dangereuses par Route<br />
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer<br />
IMDG: International Maritime Code for Dangerous Goods<br />
IATA: International Air Transport Association<br />
ICAO: International Civil Aviation Organization<br />
GHS: Globally Harmonized System of Classification and Labelling of Chemicals<br />
LC50: Lethal concentration, 50 percent<br />
LD50: Lethal dose, 50 percent<br />
· * Données modifiées par rapport à la version précédente<br />
(suite de la page 7)<br />
FR
34.0<br />
Sicherheitsdatenblatt<br />
gemäß 1907/2006/EG, Artikel 31<br />
Seite: 1/8<br />
Druckdatum: 06.03.2012 Version: 6<br />
überarbeitet am: 06.03.2012<br />
* 1 Bezeichnung des Stoffs bzw. des Gemischs und des Unternehmens<br />
· Produktidentifikator<br />
· Handelsname: Ena Tender Metal Primer Bonding<br />
· Artikelnummer: ETBOND ETBOND-2<br />
· Relevante identifizierte Verwendungen des Stoffs oder Gemischs und Verwendungen, von denen abgeraten<br />
wird<br />
· Verwendung des Stoffes / des Gemisches Dentales Bondingmaterial<br />
· Einzelheiten zum Lieferanten, der das Sicherheitsdatenblatt bereitstellt<br />
· Hersteller/Lieferant:<br />
<strong>Micerium</strong> spa., Via G. Marconi, 83 - 16036 Avegno (GE), Italy, Tel.: +39-0185-7887870, Fax: +39-0185-<br />
7887970<br />
· Auskunftgebender Bereich: Dr. Eugenio Miceli<br />
· Notrufnummer: Poison Control Center San Martino Hospital (Genua, Italia) Tel.: +39-010-352808 (24 h)<br />
* 2 Mögliche Gefahren<br />
· Einstufung des Stoffs oder Gemischs<br />
· Einstufung gemäß Verordnung (EG) Nr. 1272/2008<br />
GHS02 Flamme<br />
Flam. Liq. 2 H225 Flüssigkeit und Dampf leicht entzündbar.<br />
GHS07<br />
Skin Irrit. 2 H315 Verursacht Hautreizungen.<br />
Skin Sens. 1 H317 Kann allergische Hautreaktionen verursachen.<br />
STOT SE 3 H335 Kann die Atemwege reizen.<br />
· Einstufung gemäß Richtlinie 67/548/EWG oder Richtlinie 1999/45/EG<br />
Xi; Reizend<br />
R37/38: Reizt die Atmungsorgane und die Haut.<br />
Xi; Sensibilisierend<br />
R43: Sensibilisierung durch Hautkontakt möglich.<br />
F; Leichtentzündlich<br />
R11: Leichtentzündlich.<br />
· Besondere Gefahrenhinweise für Mensch und Umwelt:<br />
Das Produkt ist kennzeichnungspflichtig auf Grund des Berechnungsverfahrens der "Allgemeinen<br />
Einstufungsrichtlinie für Zubereitungen der EG" in der letztgültigen Fassung.<br />
· Klassifizierungssystem:<br />
Die Klassifizierung entspricht den aktuellen EG-Listen, ist jedoch er-gänzt durch Angaben aus der<br />
Fachliteratur und durch Firmenangaben.<br />
· Kennzeichnungselemente<br />
· Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008<br />
Das Produkt ist gemäß CLP-Verordnung eingestuft und gekennzeichnet.<br />
· Gefahrenpiktogramme GHS02, GHS07<br />
· Signalwort Gefahr<br />
· Gefahrbestimmende Komponenten zur Etikettierung:<br />
Methyl-methacrylat<br />
· Gefahrenhinweise<br />
H225 Flüssigkeit und Dampf leicht entzündbar.<br />
H315 Verursacht Hautreizungen.<br />
H317 Kann allergische Hautreaktionen verursachen.<br />
(Fortsetzung auf Seite 2)<br />
DE
34.0<br />
Sicherheitsdatenblatt<br />
gemäß 1907/2006/EG, Artikel 31<br />
Seite: 2/8<br />
Druckdatum: 06.03.2012 Version: 6<br />
überarbeitet am: 06.03.2012<br />
Handelsname: Ena Tender Metal Primer Bonding<br />
(Fortsetzung von Seite 1)<br />
H335 Kann die Atemwege reizen.<br />
· Sicherheitshinweise<br />
P210<br />
Von Hitze/Funken/offener Flamme/heißen Oberflächen fernhalten. Nicht rauchen.<br />
P241<br />
Explosionsgeschützte elektrische Betriebsmittel/Lüftungsanlagen/Beleuchtung verwenden.<br />
P303+P361+P353 BEI KONTAKT MIT DER HAUT (oder dem Haar): Alle beschmutzten, getränkten<br />
Kleidungsstücke sofort ausziehen. Haut mit Wasser abwaschen/duschen.<br />
P321<br />
Besondere Behandlung (siehe auf diesem Kennzeichnungsetikett).<br />
P405<br />
Unter Verschluss aufbewahren.<br />
P501<br />
Entsorgung des Inhalts / des Behälters gemäß den örtlichen / regionalen / nationalen/<br />
internationalen Vorschriften.<br />
· Sonstige Gefahren<br />
· Ergebnisse der PBT- und vPvB-Beurteilung<br />
· PBT: Nicht anwendbar.<br />
· vPvB: Nicht anwendbar.<br />
* 3 Zusammensetzung/Angaben zu Bestandteilen<br />
· Chemische Charakterisierung: Gemische<br />
· Beschreibung: Gemisch aus nachfolgend angeführten Stoffen mit ungefährlichen Beimengungen.<br />
· Gefährliche Inhaltsstoffe:<br />
CAS: 80-62-6 Methyl-methacrylat<br />
75-100%<br />
EINECS: 201-297-1 Xi R37/38; Xi R43; F R11<br />
Flam. Liq. 2, H225; Skin Irrit. 2, H315; Skin Sens. 1, H317; STOT<br />
SE 3, H335<br />
· zusätzl. Hinweise: Der Wortlaut der angeführten Gefahrenhinweise ist dem Kapitel 16 zu entnehmen.<br />
* 4 Erste-Hilfe-Maßnahmen<br />
· Beschreibung der Erste-Hilfe-Maßnahmen<br />
· Allgemeine Hinweise: Mit Produkt verunreinigte Kleidungsstücke unverzüglich entfernen.<br />
· nach Einatmen:<br />
Den Betroffenen an die frische Luft bringen und ruhig lagern.<br />
Ärztlicher Behandlung zuführen.<br />
· nach Hautkontakt:<br />
Sofort mit Wasser und Seife abwaschen und gut nachspülen.<br />
Bei andauernder Hautreizung Arzt aufsuchen.<br />
· nach Augenkontakt:<br />
Augen mehrere Minuten bei geöffnetem Lidspalt unter fließendem Wasser spülen. Bei anhaltenden<br />
Beschwerden Arzt konsultieren.<br />
· nach Verschlucken:<br />
Mund ausspülen und reichlich Wasser nachtrinken.<br />
Kein Erbrechen herbeiführen, sofort Arzthilfe zuziehen.<br />
· Hinweise für den Arzt:<br />
· Wichtigste akute und verzögert auftretende Symptome und Wirkungen<br />
Keine weiteren relevanten Informationen verfügbar.<br />
· Hinweise auf ärztliche Soforthilfe oder Spezialbehandlung<br />
Keine weiteren relevanten Informationen verfügbar.<br />
* 5 Maßnahmen zur Brandbekämpfung<br />
· Löschmittel<br />
· Geeignete Löschmittel:<br />
Schaum<br />
Löschpulver<br />
Kohlendioxid<br />
(Fortsetzung auf Seite 3)<br />
DE
34.0<br />
Sicherheitsdatenblatt<br />
gemäß 1907/2006/EG, Artikel 31<br />
Seite: 3/8<br />
Druckdatum: 06.03.2012 Version: 6<br />
überarbeitet am: 06.03.2012<br />
Handelsname: Ena Tender Metal Primer Bonding<br />
· Aus Sicherheitsgründen ungeeignete Löschmittel: Wasser im Vollstrahl.<br />
· Besondere vom Stoff oder Gemisch ausgehende Gefahren<br />
Keine weiteren relevanten Informationen verfügbar.<br />
· Hinweise für die Brandbekämpfung<br />
· Besondere Schutzausrüstung: Umgebungsluftunabhängiges Atemschutzgerät tragen.<br />
· Weitere Angaben<br />
Gefährdete Behälter mit Wassersprühstrahl kühlen.<br />
Kontaminiertes Löschwasser getrennt sammeln, darf nicht in die Kanalisation gelangen.<br />
(Fortsetzung von Seite 2)<br />
* 6 Maßnahmen bei unbeabsichtigter Freisetzung<br />
· Personenbezogene Vorsichtsmaßnahmen, Schutzausrüstungen und in Notfällen anzuwendende Verfahren<br />
Für ausreichende Lüftung sorgen.<br />
Schutzausrüstung tragen. Ungeschützte Personen fernhalten.<br />
Zündquellen fernhalten.<br />
Bei Einwirkung von Dämpfen/Staub/Aerosol Atemschutz verwenden.<br />
· Umweltschutzmaßnahmen: Nicht in die Kanalisation/Oberflächenwasser/Grundwasser gelangen lassen.<br />
· Methoden und Material für Rückhaltung und Reinigung:<br />
Mit flüssigkeitsbindendem Material (Sand, Kieselgur, Säurebinder, Universalbinder, Sägemehl) aufnehmen.<br />
Kontaminiertes Material als Abfall nach Punkt 13 entsorgen.<br />
· Verweis auf andere Abschnitte<br />
Informationen zur sicheren Handhabung siehe Kapitel 7.<br />
Informationen zur persönlichen Schutzausrüstung siehe Kapitel 8.<br />
Informationen zur Entsorgung siehe Kapitel 13.<br />
* 7 Handhabung und Lagerung<br />
· Handhabung:<br />
· Schutzmaßnahmen zur sicheren Handhabung Behälter dicht geschlossen halten.<br />
· Hinweise zum Brand- und Explosionsschutz:<br />
Zündquellen fernhalten - nicht rauchen.<br />
Maßnahmen gegen elektrostatische Aufladung treffen.<br />
· Bedingungen zur sicheren Lagerung unter Berücksichtigung von Unverträglichkeiten<br />
· Lagerung:<br />
· Anforderung an Lagerräume und Behälter:<br />
An einem kühlen Ort lagern.<br />
Nach Gebrauch den Behälter sofort verschließen und vor Lichteinwirkung schützen.<br />
· Zusammenlagerungshinweise: Getrennt von Lebensmitteln lagern.<br />
· Weitere Angaben zu den Lagerbedingungen: Vor Hitze und direkter Sonnenbestrahlung schützen.<br />
· Lagerklasse:<br />
· Klassifizierung nach Betriebssicherheitsverordnung (BetrSichV): Leichtentzündlich<br />
· Spezifische Endanwendungen Keine weiteren relevanten Informationen verfügbar.<br />
* 8 Begrenzung und Überwachung der Exposition/Persönliche Schutzausrüstungen<br />
· Zusätzliche Hinweise zur Gestaltung technischer Anlagen: Keine weiteren Angaben, siehe Punkt 7.<br />
· Zu überwachende Parameter<br />
· Bestandteile mit arbeitsplatzbezogenen, zu überwachenden Grenzwerten:<br />
80-62-6 Methyl-methacrylat<br />
AGW 210 mg/m³, 50 ml/m³<br />
2(I);DFG, EU, Y<br />
· Zusätzliche Hinweise: Als Grundlage dienten die bei der Erstellung gültigen Listen.<br />
(Fortsetzung auf Seite 4)<br />
DE
34.0<br />
Sicherheitsdatenblatt<br />
gemäß 1907/2006/EG, Artikel 31<br />
Seite: 4/8<br />
Druckdatum: 06.03.2012 Version: 6<br />
überarbeitet am: 06.03.2012<br />
Handelsname: Ena Tender Metal Primer Bonding<br />
· Begrenzung und Überwachung der Exposition<br />
· Persönliche Schutzausrüstung:<br />
· Allgemeine Schutz- und Hygienemaßnahmen:<br />
Beschmutzte, getränkte Kleidung sofort ausziehen.<br />
Vor den Pausen und bei Arbeitsende Hände waschen.<br />
Gase/Dämpfe/Aerosole nicht einatmen.<br />
Berührung mit den Augen und der Haut vermeiden.<br />
· Atemschutz:<br />
Bei guter Raumbelüftung nicht erforderlich.<br />
Atemschutz bei hohen Konzentrationen.<br />
Kurzzeitig Filtergerät:<br />
Filter AX.<br />
· Handschutz: Handschuhe / lösemittelbeständig.<br />
· Handschuhmaterial Butylkautschuk<br />
· Durchdringungszeit des Handschuhmaterials<br />
Die genaue Durchbruchzeit ist beim Schutzhandschuhhersteller zu erfahren und einzuhalten.<br />
· Augenschutz: Schutzbrille.<br />
· Körperschutz:<br />
lösemittelbeständige Schutzkleidung.<br />
(Bei Handhabung größerer Mengen.)<br />
(Fortsetzung von Seite 3)<br />
* 9 Physikalische und chemische Eigenschaften<br />
· Angaben zu den grundlegenden physikalischen und chemischen Eigenschaften<br />
· Allgemeine Angaben<br />
· Aussehen:<br />
Form:<br />
flüssig<br />
Farbe:<br />
farblos<br />
· Geruch: charakteristisch<br />
· Geruchsschwelle: Nicht bestimmt.<br />
· pH-Wert: Nicht bestimmt<br />
· Zustandsänderung<br />
Schmelzpunkt/Schmelzbereich: -48°C<br />
Siedepunkt/Siedebereich: 101°C<br />
· Flammpunkt: 10°C<br />
· Entzündlichkeit (fest, gasförmig): Nicht anwendbar.<br />
· Zündtemperatur: 430°C<br />
· Zersetzungstemperatur: Nicht bestimmt.<br />
· Selbstentzündlichkeit: Das Produkt ist nicht selbstentzündlich.<br />
· Explosionsgefahr: Das Produkt ist nicht explosionsgefährlich, jedoch ist die<br />
Bildung explosionsgefährlicher Dampf-/Luftgemische möglich.<br />
· Explosionsgrenzen:<br />
untere: 2,1 Vol %<br />
obere: 12,5 Vol %<br />
· Dampfdruck bei 20°C: 47 hPa<br />
· Dichte bei 20°C: 0,94 g/cm³<br />
· Relative Dichte Nicht bestimmt.<br />
· Dampfdichte Nicht bestimmt.<br />
· Verdampfungsgeschwindigkeit Nicht bestimmt.<br />
(Fortsetzung auf Seite 5)<br />
DE
34.0<br />
Sicherheitsdatenblatt<br />
gemäß 1907/2006/EG, Artikel 31<br />
Seite: 5/8<br />
Druckdatum: 06.03.2012 Version: 6<br />
überarbeitet am: 06.03.2012<br />
Handelsname: Ena Tender Metal Primer Bonding<br />
· Löslichkeit in / Mischbarkeit mit<br />
Wasser bei 20°C:<br />
1,6 g/l<br />
· Verteilungskoeffizient (n-Octanol/Wasser): Nicht bestimmt.<br />
· Viskosität:<br />
dynamisch:<br />
kinematisch:<br />
Nicht bestimmt<br />
Nicht bestimmt<br />
· Lösemittelgehalt:<br />
Organische Lösemittel: 0,0 %<br />
· Sonstige Angaben Keine weiteren relevanten Informationen verfügbar.<br />
(Fortsetzung von Seite 4)<br />
* 10 Stabilität und Reaktivität<br />
· Reaktivität<br />
· Chemische Stabilität<br />
· Thermische Zersetzung / zu vermeidende Bedingungen:<br />
Keine Zersetzung bei bestimmungsgemäßer Verwendung.<br />
· Möglichkeit gefährlicher Reaktionen Polymerisation unter Wärmeentwicklung.<br />
· Zu vermeidende Bedingungen Keine weiteren relevanten Informationen verfügbar.<br />
· Unverträgliche Materialien:<br />
In Gegenwart von Radikalbildnern (z.B. Peroxiden), reduzierenden Substanzen und/oder Schwermetallionen<br />
ist Polymerisation unter Wärmeentwicklung möglich.<br />
· Gefährliche Zersetzungsprodukte: keine gefährlichen Zersetzungsprodukte bekannt.<br />
* 11 Toxikologische Angaben<br />
· Angaben zu toxikologischen Wirkungen<br />
· Akute Toxizität:<br />
· Einstufungsrelevante LD/LC50-Werte:<br />
Methylmethacrylat LD-50 oral >5000 mg /kg rat (Lit.)<br />
LD-50 inhalativ 7093 ppm/4h rat (Lit.)<br />
· Primäre Reizwirkung:<br />
· an der Haut: Reizt die Haut und die Schleimhäute.<br />
· am Auge: schwach reizend<br />
· Sensibilisierung: Durch Hautkontakt Sensibilisierung möglich<br />
· Zusätzliche toxikologische Hinweise:<br />
Das Produkt weist aufgrund des Berechnungsverfahrens der Allgemeinen Einstufungsrichtlinie der EG für<br />
Zubereitungen in der letztgültigen Fassung folgende Gefahren auf:<br />
Reizend<br />
* 12 Umweltbezogene Angaben<br />
· Toxizität<br />
· Aquatische Toxizität: Keine weiteren relevanten Informationen verfügbar.<br />
· Testart Wirkkonzentration Methode Bewertung<br />
Fischtoxizität: LC-50 >79 mg/l OECD 203<br />
(MMA) NOEC: 40 mg/l ISO 7346<br />
Expositionsd: 96 h EEC84<br />
Spezies: 449 V, C1<br />
Oncorhynchus mykiss<br />
Bakterientoxizität: ECO: 100 mg/l beginnende Hemmung (MMA) Spezies:<br />
der Zellvermehrung<br />
Pseudomonas putida<br />
(Fortsetzung auf Seite 6)<br />
DE
34.0<br />
Sicherheitsdatenblatt<br />
gemäß 1907/2006/EG, Artikel 31<br />
Seite: 6/8<br />
Druckdatum: 06.03.2012 Version: 6<br />
überarbeitet am: 06.03.2012<br />
Handelsname: Ena Tender Metal Primer Bonding<br />
(Fortsetzung von Seite 5)<br />
· Persistenz und Abbaubarkeit Keine weiteren relevanten Informationen verfügbar.<br />
· Verhalten in Umweltkompartimenten:<br />
· Komponente:<br />
Methylmethacrylat Biologische Abbaubarkeit: 30,7 %<br />
Versuchsdauer: 28 d<br />
Methode:<br />
OECD 301 C<br />
Bewertung: nicht leicht abbaubar<br />
· Bioakkumulationspotenzial Keine weiteren relevanten Informationen verfügbar.<br />
· Mobilität im Boden Keine weiteren relevanten Informationen verfügbar.<br />
· Weitere ökologische Hinweise:<br />
· Allgemeine Hinweise:<br />
Wassergefährdungsklasse 1 (Selbsteinstufung): schwach wassergefährdend<br />
Nicht unverdünnt bzw. in größeren Mengen in das Grundwasser, in Gewässer oder in die Kanalisation<br />
gelangen lassen.<br />
· Ergebnisse der PBT- und vPvB-Beurteilung<br />
· PBT: Nicht anwendbar.<br />
· vPvB: Nicht anwendbar.<br />
· Andere schädliche Wirkungen Keine weiteren relevanten Informationen verfügbar.<br />
* 13 Hinweise zur Entsorgung<br />
· Verfahren der Abfallbehandlung<br />
· Empfehlung:<br />
Muß unter Beachtung der behördlichen Vorschriften einer Sonderbehandlung zugeführt werden.<br />
Darf nicht zusammen mit Hausmüll entsorgt werden. Nicht in die Kanalisation gelangen lassen.<br />
· Europäischer Abfallkatalog<br />
07 01 04* andere organische Lösemittel, Waschflüssigkeiten und Mutterlaugen<br />
· Ungereinigte Verpackungen:<br />
· Empfehlung:<br />
Kontaminierte Verpackungen sind optimal zu entleeren, sie können dann nach entsprechender Reinigung<br />
einer Wiederverwertung zugeführt werden.<br />
Nicht reinigungsfähige Verpackungen sind wie der Stoff zu entsorgen.<br />
· Empfohlenes Reinigungsmittel: Alkohol<br />
* 14 Angaben zum Transport<br />
· UN-Nummer<br />
· ADR, IMDG, IATA UN1247<br />
· Ordnungsgemäße UN-Versandbezeichnung<br />
· ADR 1247 METHYLMETHACRYLAT, MONOMER,<br />
STABILISIERT, Lösung<br />
· IMDG, IATA M E T H Y L M E T H A C R Y L A T E M O N O M E R ,<br />
STABILIZED, solution<br />
· Transportgefahrenklassen<br />
· ADR<br />
· Klasse 3 (F1) Entzündbare flüssige Stoffe<br />
(Fortsetzung auf Seite 7)<br />
DE
34.0<br />
Sicherheitsdatenblatt<br />
gemäß 1907/2006/EG, Artikel 31<br />
Seite: 7/8<br />
Druckdatum: 06.03.2012 Version: 6<br />
überarbeitet am: 06.03.2012<br />
Handelsname: Ena Tender Metal Primer Bonding<br />
· Gefahrzettel 3<br />
· IMDG, IATA<br />
(Fortsetzung von Seite 6)<br />
· Class 3 Flammable liquids.<br />
· Label 3<br />
· Verpackungsgruppe<br />
· ADR, IMDG, IATA II<br />
· Umweltgefahren:<br />
· Marine pollutant: Nein<br />
· Besondere Vorsichtsmaßnahmen für den Verwender Achtung: Entzündbare flüssige Stoffe<br />
· Kemler-Zahl: 339<br />
· EMS-Nummer: F-E,S-D<br />
· Massengutbeförderung gemäß Anhang II des<br />
MARPOL-Übereinkommens 73/78 und gemäß IBC-<br />
Code<br />
Nicht anwendbar.<br />
· Transport/weitere Angaben:<br />
· ADR<br />
· Begrenzte Menge (LQ) 1L<br />
· Beförderungskategorie 2<br />
· Tunnelbeschränkungscode D/E<br />
· UN "Model Regulation": UN1247, METHYLMETHACRYLAT, MONOMER,<br />
STABILISIERT, Lösung, 3, II<br />
* 15 Rechtsvorschriften<br />
· Vorschriften zu Sicherheit, Gesundheits- und Umweltschutz/spezifische Rechtsvorschriften für den Stoff<br />
oder das Gemisch<br />
· Nationale Vorschriften:<br />
· Hinweise zur Beschäftigungsbeschränkung:<br />
Beschäftigungsbeschränkungen für Jugendliche beachten.<br />
Beschäftigungsbeschränkungen für werdende und stillende Mütter beachten.<br />
· Klassifizierung nach Betriebssicherheitsverordnung (BetrSichV): Leichtentzündlich<br />
· Technische Anleitung Luft:<br />
Klasse Anteil in %<br />
NK 75-100<br />
· Wassergefährdungsklasse: WGK 1 (Selbsteinstufung): schwach wassergefährdend.<br />
· Stoffsicherheitsbeurteilung: Eine Stoffsicherheitsbeurteilung wurde nicht durchgeführt.<br />
* 16 Sonstige Angaben<br />
Die Angaben stützen sich auf den heutigen Stand unserer Kenntnisse, sie stellen jedoch keine Zusicherung<br />
von Produkteigenschaften dar und begründen kein vertragliches Rechtsverhältnis.<br />
· Relevante Sätze<br />
H225 Flüssigkeit und Dampf leicht entzündbar.<br />
H315 Verursacht Hautreizungen.<br />
H317 Kann allergische Hautreaktionen verursachen.<br />
(Fortsetzung auf Seite 8)<br />
DE
34.0<br />
Sicherheitsdatenblatt<br />
gemäß 1907/2006/EG, Artikel 31<br />
Seite: 8/8<br />
Druckdatum: 06.03.2012 Version: 6<br />
überarbeitet am: 06.03.2012<br />
Handelsname: Ena Tender Metal Primer Bonding<br />
H335<br />
Kann die Atemwege reizen.<br />
R11 Leichtentzündlich.<br />
R37/38 Reizt die Atmungsorgane und die Haut.<br />
R43 Sensibilisierung durch Hautkontakt möglich.<br />
(Fortsetzung von Seite 7)<br />
· Datenblatt ausstellender Bereich: <strong>Micerium</strong> S.p.a.<br />
· Ansprechpartner: Dr. Eugenio Miceli<br />
· Abkürzungen und Akronyme:<br />
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International<br />
Carriage of Dangerous Goods by Road)<br />
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the<br />
International Transport of Dangerous Goods by Rail)<br />
IMDG: International Maritime Code for Dangerous Goods<br />
IATA: International Air Transport Association<br />
ICAO: International Civil Aviation Organization<br />
GHS: Globally Harmonized System of Classification and Labelling of Chemicals<br />
GefStoffV: Gefahrstoffverordnung (Ordinance on Hazardous Substances, Germany)<br />
LC50: Lethal concentration, 50 percent<br />
LD50: Lethal dose, 50 percent<br />
· * Daten gegenüber der Vorversion geändert<br />
DE