SPLIT-SYSTEM - Rhoss

Internal Unit
air outlet
External Unit
air inlet
air outlet
air inlet
air inlet
I.4.1
INTERNAL UNIT
SECTION I: USER
The internal unit, for wall mounted installation only, is characterized by
its attractive appearance, which means it blends in well with any
furnishing style. It is fitted with a heat exchange coil, a very silent
tangential fan that guarantees excellent acoustic comfort at even the
maximum air flow, an air filter that can be removed for cleaning, a
horizontal motor-driven deflector and vertical fins in order to optimize
output air distribution.
The operating status signal LEDs and the remote control signal receiver
are located in a clearly visible frontal position.
The unit comes with:
• a fixture plate;
• a remote control;
• a wall-mounted remote control holder.
I.4.2
EXTERNAL UNIT
The external unit, for wall-mounted installation, consists of a zinc-plated
and coated steel sheet structure. It houses a hermetic type compressor
together with a statically and dynamically balanced axial fan in order to
guarantee maximum operating silence.
The unit is completed by the large surface heat exchange coil, the
lamination body, the cycle reversing valve for the heat pump versions,
the folder connections with tap, the electric condensers for compressor
and fan and the terminal board for electrical connections with the
internal unit.
I.4.3
REMOTE CONTROL
The remote control makes it possible to set and display all the air
conditioning unit operating parameters, thus facilitating all the
programming operations.
The remote control is powered by 2 R03 size AAA 1.5 V batteries.
IMPORTANT!
It is advisable to test the remote control operation
in order to establish its reception zone.
Key
Internal Unit
1) Load bearing structure
2) Front panel
3) Air filter
4) Air output grille
5) Vertical deflectors
6) Infrared signal receiver
7) Indicator signal
8) Manual operation button
9) Remote control
External Unit
10) Connection pipes
11) Electrical connections
12) Refrigerant taps
13) Air output grille
22