INSTRUCTION BOOK MANUAL DE INSTRUCCIONES ... - Janome

SECTION 5. CARE OF YOUR
MACHINE
Cleaning the Feed Dogs
Unplug the machine and remove the presser
foot and needle with a screwdriver.
Remove the needle plate with a screwdriver.
Use a lint brush to clean the feed dogs.
Replace needle plate and tighten with a
screwdriver.
Sewing Light
The sewing light is located behind the face plate.
To change the bulb, take the face plate off the sewing
machine by removing the setscrew.
* Unplug the power supply before changing the bulb.
* Do not dismantle the machine other than explained
in this manual.
• To remove ............................. Turn to the left.
• To replace ............................. Turn to the right.
WANING:
The bulb could be HOT. Protect your fingers when
handle it.
52