T2-Series - Ultimate Sound
T2-Series - Ultimate Sound
T2-Series - Ultimate Sound
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>T2</strong>-<strong>Series</strong><br />
Features<br />
• Class AB Circuitry<br />
• 2 Ohm Stable Amplifier<br />
• MOSFET Power Supply<br />
• Multi-Channel Capable<br />
• Illuminated “<strong>Ultimate</strong>” logo<br />
• Overload Protection Indicator<br />
• Gold Plated RCA Connections<br />
• Low Level Input – variable up to 8 volts<br />
• High Level Input – variable up to 10 volts<br />
• Gold Plated Terminal Block for Power Input & Speaker Output<br />
• Crossover Selection Switch for LPF / Full / HPF 1<br />
• Variable Low Pass Filter Control from 40 to 200Hz 2<br />
• Variable Crossover Control for 40 to 400Hz 1<br />
• Variable Bass Boost Control from 0 to 18dB at 45Hz 2<br />
• Bass boost – switched 12dB at 45 Hz 3<br />
• Protection Circuitry against Short, Overload and Thermal<br />
1 Not available on <strong>T2</strong>-1200 and <strong>T2</strong>-1400<br />
2 <strong>T2</strong>-1200, <strong>T2</strong>-1400 and <strong>T2</strong>-2100only<br />
3 <strong>T2</strong>-2450 and <strong>T2</strong>-5450 only<br />
Protection<br />
This amplifier has been outfitted with protection circuitry against short, overload, and<br />
thermal shut-down. In a functional state, the LED glows “red” and indicates “power<br />
on”. Should the amplifier sense any fault in your speakers or subwoofers, or reach a<br />
point of thermal shutdown, the LED will glow “blue”. In this case, the power must be<br />
shut down to the system to bring the amplifier back to a functional state.<br />
5