FLENDER International - Laumayer

Torque Limiters
Data Sheet
AUTOGARD
Data Sheet Referring to AUTOGARD Torque Limiters for Quotations or Orders Sheet 2
2) Kind of drive:
� AC motor � DC motor � Engine – number of pistons __________________
� frequency-controlled � inverter-controlled � ΥΔ-start possible � Other _______________
Input power rating: _____________________ kW; Input speed: _________________________ min -1
T Nom � 9550 � P n
3) Mounting position:
Speed at planned torque limiter position: __________________________ min -1
! Max. starting torque: T start = ___________ -times x T Nom = __________ Nm
� Horizontal � Vertical � On motor shaft � Between motor and gear unit
� Between two gear units � At gear unit output side � Within the machine
� Other ____________________________________________________________________________
4) Requirements:
The torque limiter is fitted:
– � for the connection of two shafts, combined with
� flexible N-EUPEX coupling torsionally � rigid coupling
� Other ___________________________________________________________________
– � for mounting a drive medium, such as
� sprocket � V-belt pulley � timing belt pulley
� Other ___________________________________________________________________
The torque limiter is to be quoted for / supplied � with or � without drive medium
– � for mounting a universal-joint shaft (observe compensation of length!) having a weight of
_______ kg and deflection angle α = __________ °, flange fitting dimensions: ____________
The torque limiter is to:
– � not synchronously � synchronously � be backlash-free;
– after overloading � re-engage or � free-wheel
– work as � torque limiter and/or � clutch
It should be re-engaged � manually or � by motor.
Reversal of direction of rotation is � possible or � not possible?
Special features / Extras: _________________________________________________________________
Required bore dia. D 1 input _____________ mm, with parallel keyway acc. to DIN 6885/1,
D 2 output ____________ mm, with parallel keyway acc. to DIN 6885/1,
Required tripping torque or tripping torque range ____________________________ Nm
Thank you for your assistance!
K487 DE/EN/FR 15