Utilisation du dMIX-600 - UniqueSquared.com
Utilisation du dMIX-600 - UniqueSquared.com
Utilisation du dMIX-600 - UniqueSquared.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Setup Guide<br />
Front & Rear Panels<br />
2<br />
4<br />
6<br />
Rear Panel<br />
9<br />
B<br />
C<br />
A<br />
1<br />
3 5<br />
7<br />
8<br />
Front Panel<br />
7<br />
10<br />
11<br />
1. DC inlet w/security clamp<br />
This connector is used in conjunction with the AC/DC adaptor to power the unit.<br />
Next to the DC inlet connector is a security clamp, which can be fastened over<br />
top of the cable to prevent it from being dislodged.<br />
2. MASTER OUT L/R RCA connectors (UNBALANCED)<br />
RCA type unbalanced stereo audio output. These connectors output audio signal<br />
also generated from the DMIX-<strong>600</strong> unit.<br />
3. BOOTH OUT L/R RCA connectors (UNBALANCED)<br />
RCA type unbalanced stereo audio output. These connectors output the booth<br />
monitor signal of the DMIX-<strong>600</strong> unit.<br />
4. RECORD OUT L/R RCA connectors (UNBALANCED)<br />
RCA type unbalanced stereo audio output. These connectors output the RECORD<br />
signal of the DMIX-<strong>600</strong> unit.<br />
5. MAIN OUT 2 L/R XLR connectors (BALANCED)<br />
XLR type balanced stereo audio output. These connectors output audio signal<br />
generated from the DMIX-<strong>600</strong> unit<br />
6. USB i/o and DOCK/MSD Switch<br />
A. USB MSD INPUT This connector is used to attach the USB mass stor age<br />
device that contains your music library. Suitable mass storage devices include,<br />
but are not limited to: external hard drives, flash memory, portable digital music<br />
players, CD/DVD-ROM drives, memory card readers, and active USB hubs.<br />
B. USB iPOD OUTPUT This connector allows you to connect to a PC or laptop<br />
and lets you use the DOCK in the DMIX-<strong>600</strong> as a stamdard iPod Dock.<br />
C. DOCK / MSD SWITCH This switch allows you to choose weather you are<br />
going to use your iPod as a MSD (mass storage device) or DOCK the iPod and<br />
connect it to your PC like a regular iPod DOCK.<br />
7. MICROPHONE INPUTS<br />
The DMIX-<strong>600</strong> has two microphone inputs, one located on the front panel, and<br />
one on the back. Both are controlled by the same microphone volume control<br />
rotatry which is also located on the front panel. The volume rotary features an<br />
on/off switch built into its design, so when you rotate the control all the way to<br />
the left counter clockwise it will “click” to the off position and the blue LED will<br />
turn off indicating the microphone channel is OFF. The microphone channel also<br />
has a 2 band EQ allowing you to adjust the tone of the microphone input.<br />
8. CONVERTIBLE PHONO/LINE INPUTS and SWITCHES<br />
These small switches allow you to choose between a PHONO (Turntable) input<br />
or a LINE level (Mp3, CD, Tape player etc..).and require the proper switching.<br />
When switched to the PHONO position you may use any Turntable with a magnetic<br />
cartridge. And when the switch is in the LINE position you may connect any<br />
line level device like (Mp3, CD, Tape etc).<br />
9. GROUNDING SCREW<br />
When using (a) turntable(s), you will need to ground the RCA cable(s) by screwing<br />
in the grounding fork(s) to the GROUNDING SCREW located on the rear<br />
panel of the DMIX-<strong>600</strong>.<br />
10. POWER BUTTON<br />
Press and hold the Power Button for 1 second to boot up the unit. To<br />
turn the unit off the power button must be held down for 3 seconds to<br />
protect from the unit being accidently shut down.<br />
3. Headphone jack and Cue Controls<br />
The headphone jack located on the front of the Dmix <strong>600</strong> is designed to accept<br />
any standard headphone using a 1/4’‘ jack. Use the Cue fader to fade between<br />
channels one and two for cue preview. Use the cue volume control to control<br />
headphone volume.The CUE EFFECTS button when ON allows you to cue the current<br />
effect in the headphones<br />
7