Virus TI Snow

MODUS OPERANDI
To select the desired Bank, first press the BANK button. The Virus will now prompt you to select a patch
bank. Alternatively, you can hold the BANK button down and select the desired bank without this screen appearing.
Now press any of the top row of buttons, labelled ROM 1-8 to select a ROM bank, or one of buttons labelled
RAM 1-8 on the bottom row to select a RAM bank.
Now the bank has been selected, choose the specific preset by simply typing the patch number using the
upper row for the first digit and the lower row for the second.
The patches within each bank are numbered like this:
1-1 to 1-8, 2-1 to 2-8, 3-1 to 3-8, 4-1 to 4-8, 5-1 to 5-8, 6-1 to 6-8, 7-1 to 7-8, 8-1 to 8-8
Tip: It is only necessary to press BANK if you actually need to select a different bank. Once you are in the
bank you wish to browse, you can directly select each of the 8 presets in each ‘batch’ with the lower row,
and select a different batch with the upper row. As an example, let’s select the patch ‘Tutorial 1’, which is
located in RAM8 8-1.
Why not have a try on your own first? Solution below. In case your stuck, here’s how to do it’:
Press BANK -> Lower Row 8 -> Upper Row 8 -> Lower Row 1
••
Selecting Multi Presets
Since there is only one bank of 64 Multis, it is not necessary to select a Bank first; apart from this the proceedure
is exacly the same as in Single mode.
To select which Single preset you want to assign to a particular Part, you need to press EDIT followed by
Multi, and then select the preset using the Bank and Program parameters.