TNS400 - Toyota-tech.eu
TNS400 - Toyota-tech.eu TNS400 - Toyota-tech.eu
9. How to operate the portable audio player Use an optional AUX cable to connect a portable audio player to the main unit. 9.1. Switching the AUX mode on and off 1. Press the [SOURCE/PWR] button for more than one second to turn the audio mode OFF. “Audio off” is displayed on the TomTom display. On the sub display “GOOD BYE” will be momentarily displayed and then “ALL OFF”. 2. Press the [TP/TEXT] button and [FUNC/AF] button simultaneously for longer than 3 seconds. AUX ON ↔ AUX OFF Attention: • When AUX is set to ON (“AUX ON”), the AUX mode is established by pressing the [SOURCE/ PWR] button. When AUX is set to OFF (“AUX OFF”), the AUX mode is not established by pressing the [SOURCE/PWR] button. • The [SOURCE/PWR] button must be off prior to using this feature. (Press [SOURCE/ PWR] button for more than one second - “GOOD BYE” will momentarily be displayed.) 9.2. When using AUX 1. Turn on the power to the connected portable audio player. 2. Press the [SOURCE/PWR] button to switch to the AUX mode. The sound from the connected portable audio player will be output. Attention: • While the AUX mode is activated, actions such as turning off the audio player or pulling out the connection cable may cause noise spikes that can damage the system speakers. Be sure to avoid this possibility by turning off the system power or switching from AUX mode to another mode before shutting off or disconnecting the portable audio player. • Audio output levels will differ among the various devices that can be connected by this method. Carefully adjust the volume until the output level of the connected player is known. • Before using a portable audio player in a vehicle, read the player’s operation manual carefully and confirm problem-free operation in the vehicle before proceeding. • When you connect an optional AUX cable to the main unit, it is not possible to connect any other optional equipment. TNS400 47
10. Troubleshooting 10.1. If one of these messages appears If any of the following messages is displayed on the sub display, check the equipment while referring to the cause and corrective action columns. Messages Cause Corrective action CD/MP3 READING ... MAIN UNIT IS READING DISC Wait until the message disappears before operating. INFO 3 INFO 5 INFO 6 INFO 7 NO SUPPORT PROTECT DISCS ARE DIRTY OR DAMAGED CD PLAYER FAILS MECHANICALLY WHEN THE CD PLAYER’S INTERNAL TEMPERATURE IS HIGH (TO PROTECT PICKUP UNIT) AN INTERNAL POWER SUPPLY FAILURE HAS OCCURRED CD/MP3 WITH UNSUPPORTED FORMAT ALL THE FILES IN CD ARE LICENSE PROTECTED The loaded disc is dirty or upside down. Check if the orientation is correct and if it is clean. The CD player is inoperative for some reason. • The temperature in the CD player is too high for operation. Wait till it cools down. • Resume playing after the “High temperature sensed and CD stopped” display disappears. If the CD still cannot play, have your dealer repair it. • Turn the ACC off and back on to resume the operation. • If this condition persists, please contact your dealer. Check the file. Check the file. 48 TNS400
- Page 1 and 2: TNS400 Owner’s manual Bedienungsa
- Page 3 and 4: © 2007 TOYOTA MOTOR CORPORATION Al
- Page 5 and 6: 6.4. Making and playing MP3/WMA fil
- Page 7 and 8: TNS400
- Page 9 and 10: 2. Safety precautions 2.1. Safety s
- Page 11 and 12: • Do not operate under abnormal c
- Page 13 and 14: 4. Names of controls and parts Fron
- Page 15 and 16: 4.1. Turning the power on and off W
- Page 17 and 18: Mode Function [VOL] Rotary knob/Fun
- Page 19 and 20: 4.7. Switching between the audio an
- Page 21 and 22: 2. Remove the TomTom. Hold the TomT
- Page 23 and 24: 5. How to operate the tuner 5.1. Li
- Page 25 and 26: 3. Touch the preset switch where yo
- Page 27 and 28: 5.8. EON (Enhanced other network) I
- Page 29 and 30: • Do not use accessories (stabili
- Page 31 and 32: Media The media capable of playing
- Page 33 and 34: Converting CD music to MP3/WMA file
- Page 35 and 36: When a CD has been inserted Press t
- Page 37 and 38: 6.12. Scan tracks 1. Press the [FUN
- Page 39 and 40: 7. How to operate the USB music fil
- Page 41 and 42: Caution: • When using a USB exten
- Page 43 and 44: 3. Touch the name of the music file
- Page 45 and 46: 8.3. Fast forward/rewind Press the
- Page 47: You can search for a music file by
- Page 51 and 52: If the following fail to solve the
- Page 53 and 54: 11. Technical data Power supply .2
- Page 55 and 56: 54 TNS400
- Page 57 and 58: 6.4. Erstellen und Wiedergabe von M
- Page 59 and 60: 58 TNS400
- Page 61 and 62: 2. Sicherheitshinweise 2.1. Sicherh
- Page 63 and 64: • Wenn alkalische Lösung von Tro
- Page 65 and 66: 4. Bezeichnung von Bedienungselemen
- Page 67 and 68: 4.1. Ein- und Ausschalten Beim Eins
- Page 69 and 70: 4.4. Wechseln der Modi der Audioste
- Page 71 and 72: 4.7. Wechseln zwischen Audio- und N
- Page 73 and 74: 2. TomTom abnehmen. Den TomTom an d
- Page 75 and 76: 5. Bedienung des Tuner 5.1. Tuner h
- Page 77 and 78: 3. Die Schaltfläche des Speicherpl
- Page 79 and 80: 5.8. EON (Enhanced other network) W
- Page 81 and 82: • Verwenden Sie kein Zubehör (St
- Page 83 and 84: Umgebungen mit hoher Temperatur/hoh
- Page 85 and 86: Downloads von MP3/WMA-Musikwebsites
- Page 87 and 88: Wenn eine CD eingelegt wurde Taste
- Page 89 and 90: 6.12. Titel anspielen 1. Taste [FUN
- Page 91 and 92: 7. Bedienung des USB-Musikdateiplay
- Page 93 and 94: Vorsicht: • Bei Verwendung eines
- Page 95 and 96: 3. Den Namen der abzuspielenden Mus
- Page 97 and 98: 8.3. Schneller Vor-/Rücklauf Taste
9. How to operate the portable audio<br />
player<br />
Use an optional AUX cable to connect a portable audio player to the main unit.<br />
9.1. Switching the AUX mode on and off<br />
1. Press the [SOURCE/PWR] button for more than one second to turn the audio mode OFF.<br />
“Audio off” is displayed on the TomTom display. On the sub display “GOOD BYE” will be<br />
momentarily displayed and then “ALL OFF”.<br />
2. Press the [TP/TEXT] button and [FUNC/AF] button simultaneously for longer than<br />
3 seconds.<br />
AUX ON ↔ AUX OFF<br />
Attention:<br />
• When AUX is set to ON (“AUX ON”), the AUX mode is established by pressing the [SOURCE/<br />
PWR] button. When AUX is set to OFF (“AUX OFF”), the AUX mode is not established by<br />
pressing the [SOURCE/PWR] button.<br />
• The [SOURCE/PWR] button must be off prior to using this feature. (Press [SOURCE/ PWR]<br />
button for more than one second - “GOOD BYE” will momentarily be displayed.)<br />
9.2. When using AUX<br />
1. Turn on the power to the connected portable audio player.<br />
2. Press the [SOURCE/PWR] button to switch to the AUX mode.<br />
The sound from the connected portable audio player will be output.<br />
Attention:<br />
• While the AUX mode is activated, actions such as turning off the audio player or pulling out<br />
the connection cable may cause noise spikes that can damage the system speakers. Be sure to<br />
avoid this possibility by turning off the system power or switching from AUX mode to another<br />
mode before shutting off or disconnecting the portable audio player.<br />
• Audio output levels will differ among the various devices that can be connected by this<br />
method. Carefully adjust the volume until the output level of the connected player is known.<br />
• Before using a portable audio player in a vehicle, read the player’s operation manual carefully<br />
and confirm problem-free operation in the vehicle before proceeding.<br />
• When you connect an optional AUX cable to the main unit, it is not possible to connect any<br />
other optional equipment.<br />
<strong>TNS400</strong> 47