TNS400 - Toyota-tech.eu
TNS400 - Toyota-tech.eu TNS400 - Toyota-tech.eu
5.7. Receiving RDS data Setting AF (Alternative Frequency) / REG (Regional) When AF function is ON, the unit automatically switches to the frequency where the best reception status for the station you are currently listening to is found. By default, the AF function is ON. Some stations may broadcast different programs using different frequencies according to the area. When the REG function is ON, you can continue to listen to the same program. Function Setting AF (Alternative Frequency)/ Setting REG (REGIONAL) Operation Press the [FUNC/AF] button for longer than one second and select an item. Repeatedly pressing the [FUNC/AF] button will cycle you through the following options. AF-ON/REG-OFF → AF-ON/REG-ON → AF-OFF/REG-OFF → AF-ON/REG-OFF... When the AF function is ON: The “AF” indicator is lit on the sub display. When the REG function is ON: The “REG” indicator is lit on the sub display. Setting TP (Traffic Program) / TA (Traffic Announcement) to receive traffic information With the TP/TA function, you can receive the traffic information manually or automatically. Function Setting the TP (traffic program)/ TA (traffic announcement) Operation Press the [TP/TEXT] button and select an item. In FM radio mode: TP OFF/TA OFF → TP ON/TA OFF → TP ON/TA ON* → TP OFF/TA OFF ... When TP is set to ON and TA is set to OFF, you can tune into a TP station by executing the SEEK operation (TP SEEK). “TP SEEK” is displayed during the search for the TP station. When both TP and TA are set to ON, the radio seeks a TP station automatically and “TA” blinks until the traffic information is received. The sounds are muted during the search for the TP station or when TA is set to on. * When both TP and TA are set to ON, only the “TA” is lit. Other than in AM/FM radio mode: TP OFF/TA OFF → TP ON/TA ON → TP OFF/TA OFF ... When both TP and TA are set to ON, “TA” lights and a TP station will be searched for in the background of the current source mode. If traffic information is received, the audio source mode is changed to FM radio automatically and you can listen to it. TNS400 25
5.8. EON (Enhanced other network) If the current TP station is not broadcasting traffic information or if the signal becomes weak when TP or TA is set to ON, the system will automatically search for another suitable TP station that is broadcasting traffic information. “EON” is displayed while this function is operating. When the current traffic information broadcast is finished, the system returns to its previous TP station. 5.9. Setting PTY (program type) With RDS stations, the name of the broadcasting program service (PS) and program type information (PTY) are transmitted and can be displayed on the unit’s sub display. PTY can be displayed by following the steps below. Function Displaying the PTY of the current station PTY SEEK Operation Press the [MODE/PTY] button for more than one second. The PTY name of the RDS station currently being received is displayed, and the “PTY” indicator lights on the sub display. If the PTY signal cannot be received, “NO PTY” is displayed. 1. Press the [MODE/PTY] button while the genre name of the RDS station is displayed. Repeatedly pressing the [MODE/PTY] button will cycle you through the following options. NO-PTY NEWS SPORTS TALK POP CLASSICS 2. While the above (NEWS, SPORTS, TALK, POP and CLASSICS) are displayed, press the [SELECT (Right/Left)] button for more than one second. The SEEK function will start within the selected PTY. If an RDS station within the selected PTY cannot be found, “NOTHING” will be displayed. 26 TNS400
- Page 1 and 2: TNS400 Owner’s manual Bedienungsa
- Page 3 and 4: © 2007 TOYOTA MOTOR CORPORATION Al
- Page 5 and 6: 6.4. Making and playing MP3/WMA fil
- Page 7 and 8: TNS400
- Page 9 and 10: 2. Safety precautions 2.1. Safety s
- Page 11 and 12: • Do not operate under abnormal c
- Page 13 and 14: 4. Names of controls and parts Fron
- Page 15 and 16: 4.1. Turning the power on and off W
- Page 17 and 18: Mode Function [VOL] Rotary knob/Fun
- Page 19 and 20: 4.7. Switching between the audio an
- Page 21 and 22: 2. Remove the TomTom. Hold the TomT
- Page 23 and 24: 5. How to operate the tuner 5.1. Li
- Page 25: 3. Touch the preset switch where yo
- Page 29 and 30: • Do not use accessories (stabili
- Page 31 and 32: Media The media capable of playing
- Page 33 and 34: Converting CD music to MP3/WMA file
- Page 35 and 36: When a CD has been inserted Press t
- Page 37 and 38: 6.12. Scan tracks 1. Press the [FUN
- Page 39 and 40: 7. How to operate the USB music fil
- Page 41 and 42: Caution: • When using a USB exten
- Page 43 and 44: 3. Touch the name of the music file
- Page 45 and 46: 8.3. Fast forward/rewind Press the
- Page 47 and 48: You can search for a music file by
- Page 49 and 50: 10. Troubleshooting 10.1. If one of
- Page 51 and 52: If the following fail to solve the
- Page 53 and 54: 11. Technical data Power supply .2
- Page 55 and 56: 54 TNS400
- Page 57 and 58: 6.4. Erstellen und Wiedergabe von M
- Page 59 and 60: 58 TNS400
- Page 61 and 62: 2. Sicherheitshinweise 2.1. Sicherh
- Page 63 and 64: • Wenn alkalische Lösung von Tro
- Page 65 and 66: 4. Bezeichnung von Bedienungselemen
- Page 67 and 68: 4.1. Ein- und Ausschalten Beim Eins
- Page 69 and 70: 4.4. Wechseln der Modi der Audioste
- Page 71 and 72: 4.7. Wechseln zwischen Audio- und N
- Page 73 and 74: 2. TomTom abnehmen. Den TomTom an d
- Page 75 and 76: 5. Bedienung des Tuner 5.1. Tuner h
5.8. EON (Enhanced other network)<br />
If the current TP station is not broadcasting traffic information or if the signal becomes weak when<br />
TP or TA is set to ON, the system will automatically search for another suitable TP station that is<br />
broadcasting traffic information. “EON” is displayed while this function is operating. When the<br />
current traffic information broadcast is finished, the system returns to its previous TP station.<br />
5.9. Setting PTY (program type)<br />
With RDS stations, the name of the broadcasting program service (PS) and program type<br />
information (PTY) are transmitted and can be displayed on the unit’s sub display. PTY can be<br />
displayed by following the steps below.<br />
Function<br />
Displaying the<br />
PTY of the current<br />
station<br />
PTY SEEK<br />
Operation<br />
Press the [MODE/PTY] button for more than one second.<br />
The PTY name of the RDS station currently being received is displayed,<br />
and the “PTY” indicator lights on the sub display. If the PTY signal<br />
cannot be received, “NO PTY” is displayed.<br />
1. Press the [MODE/PTY] button while the genre name of the RDS<br />
station is displayed.<br />
Repeatedly pressing the [MODE/PTY] button will cycle you through<br />
the following options.<br />
NO-PTY NEWS SPORTS TALK<br />
POP<br />
CLASSICS<br />
2. While the above (NEWS, SPORTS, TALK, POP and CLASSICS) are<br />
displayed, press the [SELECT (Right/Left)] button for more than<br />
one second.<br />
The SEEK function will start within the selected PTY.<br />
If an RDS station within the selected PTY cannot be found,<br />
“NOTHING” will be displayed.<br />
26 <strong>TNS400</strong>
Change language