TNS400 - Toyota-tech.eu
TNS400 - Toyota-tech.eu TNS400 - Toyota-tech.eu
5.4. Calling up a preset channel from the TomTom display Touch the relevant preset switch to call up the station on the audio screen. Preset switches 5.5. Memorizing stations Memorizing stations manually 1. Tune into the station to be memorized for the preset channel. 2. Press the [MODE/PTY] button to select the rotary select mode. 3. Turn the [VOL] rotary knob to select one of the preset switches P1 to P6. 4. Press the [ENTER] button until “P MEMORY” appears on the sub display. The selected station is memorized and the preset registration number and frequency are indicated on the display. To manually set additional selected stations for the remaining preset channels, repeat this procedure for each channel. If the stations have been stored in memory, pressing a switch from [1] to [6] will tune to that preset station. Caution: If the vehicle’s battery is disconnected (for repairs to the vehicle or for removal of the main unit), all stations in memory will be lost. In this case, set the stations in memory again. Memorizing stations manually on the TomTom display 1. Tune into the station to be memorized. 2. Press the [SCREEN] button and switch the display to the audio screen. TNS400 23
3. Touch the preset switch where you want to memorize the station until “P MEMORY” appears on the sub display. The selected station will be memorized.To manually set additional selected stations at the remaining preset channels, repeat this procedure for each channel. Subsequently, when you listen to the radio you will be able to select stations by touching the preset switches. Memorizing stations automatically 1. Press the [FUNC/AF] button to establish the FUNCTION mode. 2. Press the [FUNC/AF] button until the sub display switches to ASM. 3. Press the [ENTER] button. After “ASM ON” is displayed, automatic station selection will start. A search will be conducted from the lowest frequency through progressively higher frequencies and stations with strong reception will be memorized for preset registration numbers [1] to [6]. When the operation has ended the “ASM ON” indication will be cleared and the station memorized last (i.e. the one memorized for P6) will continue to be received. Subsequently, when you listen to the radio you will be able to select stations by calling up preset numbers. Attention: • Pressing the preset switches ([1] to [6]) allows you to make one-touch station selections. The frequency of the selected station is displayed on the preset switch. • When a new station is set in memory, the station previously set in memory will be deleted. • If there are fewer than six receivable stations, the stations set in the remaining switches will remain unchanged. Caution: If the vehicle’s battery is disconnected (for repairs to the vehicle or for removal of the main unit), all stations in memory will be lost. In this a case, set the stations in memory again. 5.6. Preset station scan This function enables reception of all the stations in the preset switches to be played for five seconds each. 1. Press the [FUNC/AF] button to establish the FUNCTION mode. 2. Press the [FUNC/AF] button until the sub display switches to P SCAN. 3. Press the [ENTER] button. “P SCAN” will be displayed and the stations memorized for preset channels P1 to P6 will be called up in order and received for five seconds each. To cancel the preset scan, press the [FUNC/AF] button. 24 TNS400
- Page 1 and 2: TNS400 Owner’s manual Bedienungsa
- Page 3 and 4: © 2007 TOYOTA MOTOR CORPORATION Al
- Page 5 and 6: 6.4. Making and playing MP3/WMA fil
- Page 7 and 8: TNS400
- Page 9 and 10: 2. Safety precautions 2.1. Safety s
- Page 11 and 12: • Do not operate under abnormal c
- Page 13 and 14: 4. Names of controls and parts Fron
- Page 15 and 16: 4.1. Turning the power on and off W
- Page 17 and 18: Mode Function [VOL] Rotary knob/Fun
- Page 19 and 20: 4.7. Switching between the audio an
- Page 21 and 22: 2. Remove the TomTom. Hold the TomT
- Page 23: 5. How to operate the tuner 5.1. Li
- Page 27 and 28: 5.8. EON (Enhanced other network) I
- Page 29 and 30: • Do not use accessories (stabili
- Page 31 and 32: Media The media capable of playing
- Page 33 and 34: Converting CD music to MP3/WMA file
- Page 35 and 36: When a CD has been inserted Press t
- Page 37 and 38: 6.12. Scan tracks 1. Press the [FUN
- Page 39 and 40: 7. How to operate the USB music fil
- Page 41 and 42: Caution: • When using a USB exten
- Page 43 and 44: 3. Touch the name of the music file
- Page 45 and 46: 8.3. Fast forward/rewind Press the
- Page 47 and 48: You can search for a music file by
- Page 49 and 50: 10. Troubleshooting 10.1. If one of
- Page 51 and 52: If the following fail to solve the
- Page 53 and 54: 11. Technical data Power supply .2
- Page 55 and 56: 54 TNS400
- Page 57 and 58: 6.4. Erstellen und Wiedergabe von M
- Page 59 and 60: 58 TNS400
- Page 61 and 62: 2. Sicherheitshinweise 2.1. Sicherh
- Page 63 and 64: • Wenn alkalische Lösung von Tro
- Page 65 and 66: 4. Bezeichnung von Bedienungselemen
- Page 67 and 68: 4.1. Ein- und Ausschalten Beim Eins
- Page 69 and 70: 4.4. Wechseln der Modi der Audioste
- Page 71 and 72: 4.7. Wechseln zwischen Audio- und N
- Page 73 and 74: 2. TomTom abnehmen. Den TomTom an d
3. Touch the preset switch where you want to memorize the station until “P MEMORY”<br />
appears on the sub display.<br />
The selected station will be memorized.To manually set additional selected stations at the<br />
remaining preset channels, repeat this procedure for each channel. Subsequently, when you<br />
listen to the radio you will be able to select stations by touching the preset switches.<br />
Memorizing stations automatically<br />
1. Press the [FUNC/AF] button to establish the FUNCTION mode.<br />
2. Press the [FUNC/AF] button until the sub display switches to ASM.<br />
3. Press the [ENTER] button.<br />
After “ASM ON” is displayed, automatic station selection will start. A search will be conducted<br />
from the lowest frequency through progressively higher frequencies and stations with strong<br />
reception will be memorized for preset registration numbers [1] to [6]. When the operation has<br />
ended the “ASM ON” indication will be cleared and the station memorized last (i.e. the one<br />
memorized for P6) will continue to be received. Subsequently, when you listen to the radio you<br />
will be able to select stations by calling up preset numbers.<br />
Attention:<br />
• Pressing the preset switches ([1] to [6]) allows you to make one-touch station selections. The<br />
frequency of the selected station is displayed on the preset switch.<br />
• When a new station is set in memory, the station previously set in memory will be deleted.<br />
• If there are fewer than six receivable stations, the stations set in the remaining switches will<br />
remain unchanged.<br />
Caution: If the vehicle’s battery is disconnected (for repairs to the vehicle or for removal of the<br />
main unit), all stations in memory will be lost. In this a case, set the stations in memory again.<br />
5.6. Preset station scan<br />
This function enables reception of all the stations in the preset switches to be played for five<br />
seconds each.<br />
1. Press the [FUNC/AF] button to establish the FUNCTION mode.<br />
2. Press the [FUNC/AF] button until the sub display switches to P SCAN.<br />
3. Press the [ENTER] button.<br />
“P SCAN” will be displayed and the stations memorized for preset channels P1 to P6 will be<br />
called up in order and received for five seconds each. To cancel the preset scan, press the<br />
[FUNC/AF] button.<br />
24 <strong>TNS400</strong>
Change language