TNS400 - Toyota-tech.eu

5. How to operate the tuner
5.1. Listening to the tuner
1. Press the [SOURCE/PWR] button to switch to tuner mode.
2. Press the [BAND] button to switch to the desired band.
Press the [BAND] button to switch the band in the following sequence:
FM1 → FM2 → FM3 → AM (LW/MW) → FM1 → ...
5.2. Tuning to a station
Tuning to a station manually
Each pressing of the [SELECT(Right/Left)] button will change the frequency by one step.
Right: Tunes to higher frequencies.
Left: Tunes to lower frequencies.
Tuning to a station automatically
Press the [SELECT(Right/Left)] button for more than one second.
Receives stations with strong reception.
Right: Starts searching toward higher frequencies.
Left: Starts searching toward lower frequencies.
Attention: At times, it may be difficult to maintain optimum reception because the
antenna affixed to your vehicle is constantly in motion (relative to the broadcast antenna),
encountering continuous variation in the strength of the radio signals. Other factors affecting
reception include interference from natural obstacles, sign posts, etc.
5.3. Calling up preset channels
1. Press the [MODE/PTY] button to select the preset channel mode.
2. Turn the [VOL] rotary knob to call up the station registered for a preset channel.
3. Press the [ENTER] button.
The registered preset channel will be selected and the corresponding station will be received.
Six stations can be memorized for each of FM 1, 2 and 3, and six stations can be memorized
for AM (LW/MW) making a total of 24 stations.
22 TNS400