PILOT'S MANUAL MANUEL DE VOL - Ozone

OZONE MATERIALS
The best part about starting a new company is that you get the opportunity to
choose the ideal materials. We have put together what we think is the best possible
combination for durability, performance and longevity.
We started to develop our first wing on a clean sheet of paper. The choice of
materials was one of the first problems to solve. In the end we chose the material
that we knew would do its particular job best. End of story. Here's what
OZONE gliders are made of:
Uppe-surface
Porcher-Marine 34 g/m2 Triple silicone-coated and polyurethane-coated Ripstop
Nylon
lower-surface
Porcher-Marine 34 g/m2 Polyurethane coated Ripstop Nylon
Ribs
Porcher-Marine 39 g/m2 and 34 g/m2 High tenacity Skytex+ Ripstop Nylon. This
has been selected for stability and resistance to stretch - vital if a glider is to keep
its safe-flying characteristics for a long time.
Leading-edge reinforcement
Double-laminated Mylar. Selected for long-term durability, this ensures that
your glider's take-off characteristics will remain consistently good for season
after season.
Lines
Lowers- B-Tech Technora
Mids and uppers- B-Tech pre-stretched heat-treated Dyneema
Risers and hardware
Shackles - High quality micro maillons from Maillon Rapide.
All these components have been chosen for their renowned quality and durability.
6