Fresh-Aroma-Perfect Deluxe - Quelle

Fresh-Aroma-Perfect Deluxe - Quelle Fresh-Aroma-Perfect Deluxe - Quelle

bilder.universal.at
from bilder.universal.at More from this publisher
30.05.2014 Views

Brewing Preparing coffee with preset timer EN NOTE ►► To brew coffee using the timer, the time must be set as described in the section Setting the time. ►► Activate the display lighting by pressing any key. The lighting goes out 60 seconds after the last button was pressed. Programming the preset time Press the "Auto/Prog" button (22) and keep the button pressed for about 3 seconds. The indicator lamp "Auto/ Prog" (23) starts flashing. Use the "H" button (30) and "M" (31) to set the requested starting time. For brewing coffee with coffee powder: Also press the "Brew“ button (26) while as the "Auto/Prog" indicator lamp (23) is still flashing. The "Brew" indicator lamp (24) lights up. Fill water into the water tank and the coffee powder into the filter. Brewing coffee with coffee beans: Make sure that the "Brew" indicator lamp (24) is not on. If and when required, press the "Brew" button (26) until the "Auto/ Prog" indicator lamp (23) continues to flash. The "Brew" indicator lamp (24) goes off. Set the number of cups, the strength of the coffee and the grinding fineness. Fill water into the water tank and the coffee beans into the grinder. Place the filter. 60 BEEM - Elements of Lifestyle

Brewing Terminate the programming process. Press the "Auto/Prog" button (22) again to activate the preset timer function. You can also wait until the "Auto/prog" indicator lamp(23) stops flashing and then press the "Auto/Prog" button (22). The "Auto/Prog" indicator lamp (23) lights up permanently and the time selection function is activated. When the preset time is reached, the appliance is switched on automatically. EN Stopping the preset timer In order to stop the timer, press one of the following buttons: –– "Auto/Prog" button (22) - The "Auto/Prog" indicator lamp (23) goes off. –– "On/Off" button (19) - The "Auto/Prog" indicator lamp (23) goes off and the appliance starts brewing the coffee with coffee beans. –– The "Brew" button (26) The "Auto/Prog" indicator lamp (23) goes out and the appliance starts brewing coffee with coffee powder. BEEM - Elements of Lifestyle 61

Brewing<br />

Terminate the programming process.<br />

Press the "Auto/Prog" button (22) again to activate the preset<br />

timer function. You can also wait until the "Auto/prog" indicator<br />

lamp(23) stops flashing and then press the "Auto/Prog"<br />

button (22). The "Auto/Prog" indicator lamp (23) lights up<br />

permanently and the time selection function is activated.<br />

When the preset time is reached, the appliance is switched on<br />

automatically.<br />

EN<br />

Stopping the preset timer<br />

In order to stop the timer, press one of the following buttons:<br />

–– "Auto/Prog" button (22) - The "Auto/Prog" indicator<br />

lamp (23) goes off.<br />

–– "On/Off" button (19) - The "Auto/Prog" indicator lamp (23)<br />

goes off and the appliance starts brewing the coffee with<br />

coffee beans.<br />

–– The "Brew" button (26)<br />

The "Auto/Prog" indicator lamp (23) goes out and the<br />

appliance starts brewing coffee with coffee powder.<br />

BEEM - Elements of Lifestyle<br />

61

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!