Dialogue essais-simulation et identification de lois de comportement ...

Partie A - Chapitre 1 : Superélasticité des alliages à mémoire de forme
(Gall et al. 1999) Gall K., Sehitoglu H. (1999). The role of texture in tension–compression asymmetry in
polycrystalline NiTi. International Journal of Plasticity 15, 69-92.
(Grabe et Bruhns 2009) Grabe C.et Bruhns O.T. (2009). Path dependence and multiaxial behavior of a
polycrystalline NiTi alloy within the pseudoelastic and pseudoplastic temperature regimes.
International Journal of Plasticity 25, 513-545.
(Guénin 1995) Guénin G. (1995). Alliage à mémoire de forme. Techniques de l’ingénieur.
(Guénin 1997) Guénin G. (1997). Shape Memory and Pseudoelastic Properties of Fe-Mn-Si and Ti-Ni
Based Alloys. J. Phys IV, 7 - C5, 467–477.
(Hartl et Lagoudas 2007) Hartl D. J. et Lagoudas D. C. (2007). Aerospace applications of shape
memory alloys. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace
Engineering 221(4), 535-552.
pastel-00910076, version 1 - 27 Nov 2013
*(Hild et Roux 2008) Hild F. et Roux S. (2008). CORRELI-Q4: A software for “Finite-element”
displacement field measurements by digital image correlation. Internal report n°269, LMT Cachan,
France.
(Kim et al. 2010) Kim C. G., Choi I .J., Lee J. Y, Cho S.-J., Park S. R., Lee J. H., Ryu K. W., Kim Y.-W., Park
Y. I. (2010). Covered versus uncovered self-expandable metallic stents for palliation of malignant
pyloric obstruction in gastric cancer patients: a randomized, prospective study. Gastrointestinal
Endoscopy 77,25-32.
(Kim et Daly 2011) Kim K., Daly S. (2011). Martensite Strain Memory in the Shape Memory Alloy
Nickel-Titanium Under Mechanical Cycling. Experimental Mechanic 51, 641-652.
(Lagoudas 2008) Lagoudas D. (2008). Shape Memory Alloys - Modeling and Engineering Applications.
Sciences Sup. Springer US.
*(Lagoudas et al. 2012) Lagoudas D., Hartl D., Chemisky Y., Machado L. et Popov P. (2012).
Constitutive model for the numerical analysis of phase transformation in polycrystalline shape
memory alloys. International Journal of Plasticity 32, 155-183.
*(Lecompte et al. 2006) D. Lecompte, A. Smits, S. Bossuyt et H. Sol (2006). Quality assessment of
speckle patterns for digital image correlation. Optic Laser Eng 44, 1132-1145.
*(Lexcellent et Leclerq 1996) Lexcellent C. et Leclercq S. (1996). A general macroscopic description of
the thermomechanical behavior of shape memory alloys. J. Mech. and Phys. of Solids 44(6), 953–980.
(Liu et al. 1998) Liu Y., XIE Z., Van Humbeeck J. et Delaey L. (1998). Asymmetry of stress-strain curves
under tension and compression for NiTi shape memory alloys. Acta Materialia 46, 4325-4338.
(Liu et al. 1999) Liu Y., Xie Z.L., Van Humbeeck J. et Delaey L. (1999) Effect of texture orientation on
the martensite deformation of NiTi shape memory alloy sheet. Acta Materialia 47, 645-660.
(Mabe et al. 2006) Mabe J. H., Calkins F. T. et Butler G. W. (2006). Boeing’s variable geometry
chevron, morphing aerostructure for jet noise reduction. American Institute of Aeronautics and
Astronautics, AIAA–2006–2142.
(Mao et al. 2010) Mao S.C., Luo J.F., Zhang Z., Wu M.H., Liu Y.et Ha X.D. (2010). EBSD studies of the
stress-induced B2–B19’ martensitic transformation in NiTi tubes under uniaxial tension and
compression. Acta Materialia 58, 3357-3366.
23