You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BACK PANEL:<br />
SPEAKON CONNECTOR<br />
SCHEMATIC DIAGRAM<br />
AMP OUTPUTS<br />
A.C B.C<br />
1+ 1-<br />
1-<br />
2+ 2-<br />
NOT CONNECTED<br />
1+<br />
2+<br />
2-<br />
3 OUTPUTS<br />
Speakon and Binding post -type loudspeaker connectors. The Speakon connector is designed specially for highpower<br />
speaker connections. It locks in place, prevents shock hazard, and assures the correct polarity.<br />
SPEAKER CABLING<br />
Larger wire sizes and shorter lengths minimize both loss of power and degradation of damping factor. Do not<br />
place speaker cables next to input wiring. Please take care when binding posts are used, that there comes no<br />
possibility to short cirquit from loosen cables.<br />
4 Selecting GROUND SWITCH<br />
Ground lift means breaking a connection between chassis earth and electrical earth. Use this feature only when<br />
50Hz hum is excisting from loudspeakers.<br />
ENGLISH<br />
DEUTSCH<br />
5 Selecting stereo / Parallel / Bridge mode<br />
Stereo mode<br />
Each channel within the pair remains independent, and each may be used for a different signal.<br />
Parallel mode<br />
This setting connects both inputs of a pair together. One signal feeds both channels. Do<br />
not connect different sources to each input. Each channel`s gain control and speaker<br />
connection remain independent.<br />
Bridge mode<br />
This setting combines both channels of a pair into a single channel with twice the output voltage. Use only the<br />
first channel s input and gain control. Set the second channel s gain control at minimum.<br />
FRANCAIS español<br />
FRANCAIS<br />
7