3 - Blomberg
3 - Blomberg
3 - Blomberg
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Door height adjustment<br />
Door can be raised vertically. This process can be performed easily using an Allen wrench<br />
as illustrated in the figure. Door shelves should be empty when adjusting the door height.<br />
• Remove the lower ventilation cover as described in the previous page. (1)<br />
• Loosen the 3 screws of the lower door hinges using a screwdriver. (Do not remove completely)<br />
(2)<br />
2<br />
1<br />
• If the freezer compartment door is lower than the fridge compartment door, bring them to<br />
the same level by turning the turning the elevation screw on the freezer compartment side<br />
in the direction of arrow using a M6 Allen wrench as illustrated in Step (3).<br />
• If the freezer compartment door is higher than the fridge compartment door, bring them to<br />
the same level by turning the turning the elevation screw on the fridge compartment side in<br />
the direction of arrow using a M6 Allen wrench as illustrated in Step (3).<br />
After bringing the doors to the same level by elevating the front part with the aid of the<br />
elevation screws, doors of the refrigerator shall close properly. If the doors do not close<br />
properly, this might adversely affect the efficiency of the refrigerator.<br />
3<br />
Allen wrench<br />
8<br />
EN