GW 30 514 - Gewiss
GW 30 514 - Gewiss
GW 30 514 - Gewiss
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
OPERATING INSTRUCTIONS<br />
HOW IT WORKS<br />
green<br />
yellow<br />
green<br />
yellow<br />
When you switch the detector on for the<br />
first time, it tests the leds and the siren<br />
for about 5 seconds.The preheating stage<br />
follows, which lasts 4 minutes and during<br />
which the exclusion / silencer / test button<br />
is deactivated.<br />
After this warm-up period, the detector<br />
enters its normal operating mode.<br />
E<br />
N<br />
G<br />
L<br />
I<br />
S<br />
H<br />
green<br />
yellow<br />
The combination of leds shown here<br />
indicates that the detector is faulty.<br />
green<br />
yellow<br />
red<br />
Alarm mode.<br />
The alarm threshold has been exceeded.<br />
To signal the alarm, the leds light up,<br />
the acoustic signal starts and the relay<br />
switches over.<br />
When the alarm situation ends, the detector automatically returns to its normal<br />
operating mode. During this period, the detector emits an intermittent acoustic signal.<br />
25