GW 30 514 - Gewiss

WARNING - IMPORTANT
• Thank you for selecting this Gewiss product.
Gewiss products have been designed with attention to detail and built using
only the very best materials. Gewiss products will guarantee excellent and
lasting performance.
• The installer is kindly requested to fill out this leaflet and then hand it to the end
user, asking him/her to read it carefully.
• Carefully read the instructions below as they provide important information on
how the gas detector works, how it should be fitted and serviced (routine and
extraordinary maintenance) and what to do with it once it reaches the end of its
expected life.
• The manufacturer may not be held liable for injury to persons or pets or
damage caused by the use of the gas detector in situations and conditions
other than those indicated in the instructions below.
• The manufacturer may not be held liable if the detector is sold in non-original
packaging. Immediately after removing the product from its packaging, make
sure that it is not damaged.
• Make sure that the main power supply has been switched off before attempting
to fit the device or touch the wiring.
• The gas detector will only work when plugged into the mains. A device has a
one minute delay after a blackout or during installation, during which time its
electronic components are reset.
• Before connecting the detector, make sure that the data on its rating plate
match the mains supply.
• Connect the detector as indicated in the drawings on page 22.
• All Playbus products must be fitted in compliance with HD 384 - IEC 364
standards for domestic appliances and similar devices, in dust-free areas and
where there is no need for special water-proofing protection.
• Always contact an authorised technician or Gewiss own customer service
("SAT") if the detector is faulty and/or malfunctions.
• Do not use in areas with fire-fighting systems.
16