Navicella - Peg Perego
Navicella - Peg Perego
Navicella - Peg Perego
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
equipped with a lever under the base which allows the<br />
internal air circulation to be adjusted. Move the lever to<br />
blue for a cool, well-ventilated environment (summer), or<br />
to red to limit the intake of air (winter).<br />
5• CARRIER STRAPS: to move the <strong>Navicella</strong> bassinet unit,<br />
lower the hood and extract the carrier straps from the side<br />
pockets (fig_a). It can also be carried by the Ganciomatic<br />
handles (fig_b).<br />
Ganciomatic system<br />
6• Ganciomatic is the quick, practical system that makes it<br />
possible to attach the <strong>Navicella</strong> to the Ganciomatic Base of<br />
the Classico 58.5 chassis (fig_a), the Bassinet Stand (fig_b)<br />
and the Caravell 22 (fig_c) in a single step. The Classico<br />
58.5 chassis, the Bassinet Stand and the Caravell 22 are<br />
available for purchase separately.<br />
To attach the <strong>Navicella</strong>, put it on the chassis and press with<br />
both hands until it clicks into place.<br />
Always apply the brakes on the chassis before attaching<br />
and removing the <strong>Navicella</strong>.<br />
Check that the bassinet unit is properly attached.<br />
7• To release the <strong>Navicella</strong>, move the clip on the Ganciomatic<br />
handle in the direction of arrow_a while pressing it in<br />
(arrow_b) and lift the bassinet unit until it comes free<br />
(arrow_c).<br />
Removing the lining<br />
8• REMOVING THE LINING OF THE <strong>Navicella</strong>: Unbutton the<br />
cover and the hood. Press the fasteners and pull the hood<br />
upwards to release it (fig_a). Raise the backrest and remove<br />
the mattress pad (fig_b). Unbutton (fig_c) and remove the<br />
inner lining (fig_d).<br />
Padding cleaning instructions<br />
• Brush the fabric parts to remove dust and hand wash at a<br />
maximum temperature of 30° without wringing.<br />
• Do not use chlorine bleach.<br />
• Do not iron.<br />
• Do not dry clean.<br />
• Do not remove stains with solvents and do not tumble dry.<br />
17<br />
Product cleaning<br />
• This product requires a small amount of maintenance.<br />
Cleaning and maintenance must only be carried out by<br />
adults.<br />
• Keep all moving parts clean and if necessary lubricate them<br />
with light oil.<br />
• Clean the plastic parts periodically with a damp cloth. Do<br />
not use solvents or similar substances.<br />
• Brush the fabric parts to remove dust.<br />
• Do not clean the polystyrene shock absorbing device with<br />
solvents or other similar products.<br />
• Protect the product from atmospheric agents: humidity,<br />
rain or snow. Extended exposure to sunshine can cause<br />
colour changes in many materials.<br />
• Store the product in a dry environment.<br />
• CLEANING THE NAVICELLA BASSINET UNIT RAIN COVER:<br />
wash with a sponge and soapy water; do not use<br />
detergents.<br />
Car Kit<br />
how to fit the safety harness<br />
9• Fit the <strong>Navicella</strong> with the backrest and hood lowered.<br />
10• When travelling in vehicles, remove any additional mattress<br />
pads.<br />
11• 3-POINT SAFETY HARNESS: Pass the leg divider straps<br />
through the slot in the mattress pad (fig_a) and the slots<br />
in the shell (fig_b) so that they come out on the other side<br />
(fig_c).<br />
12• Pass the two ends of the shoulder straps through the slots<br />
in the mattress pad and the shell (fig_a), then clip them to<br />
the pins (fig_b).<br />
13• Straps attached under the shell (fig_a) and inside the<br />
<strong>Navicella</strong> (fig_b).<br />
Attachment in vehicles with safety belts<br />
ATTACHING THE BASSINET UNIT IN VEHICLES: It is possible<br />
to install the bassinet unit in cars if there are 3 rear seats