GroupShield 5.2 for Exchange 2000 Installation Guide - McAfee
GroupShield 5.2 for Exchange 2000 Installation Guide - McAfee
GroupShield 5.2 for Exchange 2000 Installation Guide - McAfee
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
g Select Physical disk and click Add.<br />
h Select <strong>Exchange</strong> In<strong>for</strong>mation store and click Add.<br />
Installing the Software<br />
i Select Network name (the virtual server name) and click Add.<br />
NOTE: If you <strong>for</strong>get to select any of the above, you will be<br />
prompted to do so.<br />
j Click Next.<br />
k Click Finish to return to the Cluster Administrator dialog box.<br />
The resource definition is propagated to all other nodes in the cluster.<br />
l Right-click Bring Online.<br />
m Repeat Step a through Step k <strong>for</strong> each virtual server you wish to<br />
protect.<br />
n On completion, click OK to exit from the Cluster Administration MMC<br />
and return to the <strong>GroupShield</strong> Setup Wizard.<br />
5 To register your details in the <strong>McAfee</strong> customer database, follow the<br />
instructions given on “To register your details in the <strong>McAfee</strong> customer<br />
database:” on page 25:<br />
6 Configure your system:<br />
a Click Start on the Windows <strong>2000</strong> task bar, then point to Programs<br />
and select <strong>McAfee</strong>.<br />
b From the drop-down menu, point to <strong>GroupShield</strong> <strong>Exchange</strong> and<br />
select <strong>GroupShield</strong> <strong>Exchange</strong> Manager.<br />
The Microsoft Management Console appears with the root defined<br />
as <strong>GroupShield</strong> <strong>Exchange</strong>.<br />
c Expand the <strong>GroupShield</strong> <strong>Exchange</strong> list by clicking and select the<br />
domain you want to open.<br />
d Select the server that you want to see and click Configuration to open<br />
the <strong>GroupShield</strong> <strong>Exchange</strong> Summary dialog box.<br />
e Configure your system as required.<br />
For example, if you want scanning notifications to be delivered, you<br />
must specify a recipient’s mailbox on the Administration tab.<br />
f On completion, click OK to save the configuration.<br />
Now test your system as described in “Testing your installation” on page 34.<br />
<strong>Installation</strong> <strong>Guide</strong> ENG-29