Texte intégral en version PDF - Epublications - Université de Limoges

290 Bibliographie
[Schiller et al, 1997]- G. Schiller, M. Muller, R. Ruckdaschel, R. Henne, M. Lang , "Plasma
spraying of Solid Oxide Fuel Cell components", in Thermal Spray: A United Forum for
Scientist and Technological Advances,(ed) C.C.Berndt,(pub) ASM Int., Materials Park, OH,
USA, (1997), 27-34.
[Schiller et al, 1999]- G. Schiller, M. Muller, F. Gitzhofer , "Preparation of perovskite
powders and coatings by radiofrequency suspension plasma spraying”, Journal of Thermal
Spray Technology, 8 (3), (1999), 389-392
[Siemens-Westinghouse®]- http://www.siemenswestinghouse.com.
[Sobolev, 1998]- Sobolev V.V , "Morphologies of splats of thermally sprayed Coatings"', in
Thermal spray : Meeting the challenges of the 21st Century, (ed) C.C oddet, (pub) ASM
International, Materials Park, OH, USA,(1998), 507-510.
[Sodeoka et al, 2003]-S. Sodeoka, M. Suzuki, T. Inoue, “Effect of chamber pressure and
spray distance on the plasma sprayed alumina deposition”, in Thermal Spray 2003:
Advancing the Science & Applying the technology, (Ed.) C. Moreau and B. Marple, (Pub)
ASM int., Materials Park, OH USA, (2003), 597-601.
[Stevens et al, 1995]- P.Stevens, F.Novel-Cattin,, A Hammou, C.Lamy, M.Cassir, “Piles à
combustibles”, techniques de l’ingénieur.
[Sulzer®]- http://www sulzer.com
[Tanaka et al, 1995]- T. Tanaka, Y. Sakai and H. Kawaguchi, “effect of orifice diameter of
torch injector tube in inductively coupled plasma mass spectrometry”, Analytical Sciences,
11, (1995), 673-676.
[Tecnar®]- http://tecnar-automation.com
[Vardelle A et al,1 998, a]- A. Vardelle, P. Fauchais, B. Dussoubs, N.J. Themelis, « Heat
generation and particle injection in a thermal plasma torch », Plasma Chemistry and Plasma
Processes, 18 (4), (1998), 551-574.
[Vardelle A et al, 1998, b]- A. Vardelle, P. Fauchais, B. Dussoubs, N.J. Themelis, « Heat
generation and particle injection in a thermal plasma torch », Plasma Chemistry and Plasma
Processes, 18 (4), (1998), 551-574.
[Vardelle M et al, 2001]- M. Vardelle , A. Vardelle, P. Fauchais, K-I. Li, B. Dussoubs,
N.J.Themelis « Controlling particle injection in plasma spraying », J. of Thermal Spray
Technology, 10 (2), 2001, 267-284.