Texte intégral en version PDF - Epublications - Université de Limoges

288 Bibliographie
[McGrann et Graves, 1997]- R.T.R. McGrann , J.A.Graves, "Effect of substrate temperature
and thermal cycle on residual stress in Yttria Stabilized Zirconia Thermal Barrier Coatings",
in Thermal Spray: A United Forum for Scientist and Technological Advances, (ed) C.C
Berndt, (pub) ASM International, Materials Park, Ohio,USA, (1997), 885-890.
[Manning, 1997]- P.S. Manning, J.D. Sirman, R.A de Souza, J.A. Kilner, “The kinetics of
oxygen transport in 9,5mol% single crystal yttria stabilised zirconia”, Solid State Ionic, 100,
(1997), 1-10.
[Minh, 1993]- Nguyen Q. Minh, "Ceramic fuel Cells", Journal of American Ceramic Society,
76 (3), 1993, 563-588.
[Moreau et al, 1995]- C. Moreau, P. Gougeon, A. Burgess, D. Ross, « Characterization of
particle flows in an axial injection plasma Torch », in Advances in Thermal Spray Science
and Technology, (ed) C.C. Berndt et S. Sampath, (pub) ASM International, Materials Park,
OH, USA, (1995), 140-147
[Moreau et al, 1996]- C. Moreau, P. Gougeon, M. Lamontagne, V. Lacasse G. Vaudreuil, P.
Cielo, "On-line control of the plasma spraying process by monitoring the temperature,
velocity and trajectory of the in-flight particles", in Thermal Spray: industrial applications,
(ed.) C.C Berndt, (pub.) ASM International, Materials Park, Ohio, USA, (1994), 731-437.
[Murphy, 1996]- A.B. Murphy, « The influence of demixing on the properties of a free
burning arc », Appl.Phys. Letter, 69 (3), (1996), 328-330.
[Okumura et al, 2000]- K. Okumura , Y. Aihara, S. Ito, S. Kawasaki « Developpment of
thermal spraying sintering technology for Solid Oxide Fuel Cells », Journal of Thermal Spray
Technology, 9 (3), (2000), 354-359.
[Oseir®]- http://www.oseir.com
[Pasandideh et al, 1996]- M. Pasandideh-fard et J. Mostaghini, "Droplet impact and
solidification in a thermal spray process : droplet-substrate interactions", in Thermal Spray :
practical solutions for engineering problems, (ed.) C.C. Berndt, (pub) ASM Int, Materials
Park, Ohio, USA, (1996), 637-646.
[Pawlowski, 1995]- L. Pawlowski, « The science and engineering of thermal spray
coatings », (pub) J. Wiley and sons, N.Y., (1995).
[Pershin et al, 2001]- V. Pershin, M. Pasandideh-Fard, J. Mostaghimi, « Effect of substrate
properties on the formation of plasma–sprayed alumina splats », in Thermal Spray 2001: New
Surfaces for a New Millennium,(Ed) C.C. Berndt, K.A. Khor, and E.F. Lugscheider, (pub)
ASM Int., Materials Park, Ohio, USA,(2001), 813-820