Instruction book - Janome

1
2
4
5
4
2
3
5
1
3
1
2
16
Threading the Machine
• Threading the machine
* Place the felt cushion on the spool pin first
and then the spool of thread. The end of the
thread should be coming off the spool as
shown.
* Raise the thread take-up lever to its highest
position by turning the handwheel counterclockwise.
* Raise the presser foot to release the thread
tension.
1 Draw the end of thread around the thread
guide.
1 Thread guide
2 While holding the thread near the spool, draw
the end of the thread down along the right
channel and around the bottom of the guide
plate.
3
Firmly draw the thread up along the left
channel. Slip the thread into the slot of the
thread take-up lever from right to left and
down into the take-up lever eye.
4 Slide the thread behind the needle bar thread
guide on the left.
2
Needle bar thread guide
5 Thread the needle from front to back.