fabric freshener revitalizador de ropa défroisseur à ... - Whirlpool
fabric freshener revitalizador de ropa défroisseur à ... - Whirlpool
fabric freshener revitalizador de ropa défroisseur à ... - Whirlpool
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2. Place garment(s) on hanger(s). Button shirts and jackets.<br />
Smooth surfaces.<br />
3. Sli<strong>de</strong> hanger onto front of hanger bar at top of Fabric<br />
Freshener. Position hanger in 1 of 2 slots.<br />
NOTES:<br />
8<br />
The Fabric Freshener works best with no more than<br />
2 clothing items per cycle.<br />
Fabric Freshener will not operate if items are placed on<br />
the bottom (exhaust grille) of Fabric Freshener.<br />
Sli<strong>de</strong> hanger bar through hole in top of pants hanger.<br />
If using Cotton Performance Pack tensioning weights, add<br />
weights to lower edges of garments. See “Accessories” for<br />
information on or<strong>de</strong>ring additional accessories.<br />
NOTE: Do not use tensioning weights on garments that may<br />
stretch easily.<br />
Start/Steaming<br />
Control Panel Indicator Lights<br />
A Start/Steaming indicator light indicates Fabric Freshener cycle<br />
has started and is in the steaming process.<br />
Gentle Drying<br />
A Gentle Drying indicator light indicates steaming cycle is<br />
complete and the drying cycle has started.<br />
Cooling<br />
A Cooling indicator light indicates that the drying cycle is<br />
complete and air is circulating to cool the garment(s).<br />
Complete<br />
A Complete indicator light indicates that the cycle is complete.<br />
Unzip bag and remove items from Fabric Freshener.<br />
NOTE: Metal hangers, buttons and zippers may be very warm.<br />
Start Fabric Freshener<br />
Starting/Stopping<br />
WARNING<br />
Explosion Hazard<br />
Use water only.<br />
Failure to do so can result in <strong>de</strong>ath or explosion.<br />
NOTE: For drying cycle only, leave cycle cup empty and press<br />
the ON/OFF button for approximately 1 second.<br />
1. Remove cycle cup from cup receptacle. Fill cycle cup with<br />
appropriate level of room temperature, distilled water<br />
according to material being refreshed and the markings on<br />
the si<strong>de</strong> of the cycle cup. See Fabric Recommendations<br />
chart.<br />
IMPORTANT: Use distilled water only. Failure to use distilled<br />
water may result in permanent damage to the machine.<br />
A. Cycle cup for distilled water only<br />
B. Cup receptacle<br />
A<br />
B