fabric freshener revitalizador de ropa défroisseur à ... - Whirlpool

Unpack Fabric Freshener
1. Remove Fabric Freshener from box.
2. Save box and all packaging materials in case service is
needed in the future.
F
K
J
A. Steel pin
B. Cord storage wrap
(located below pole)
C. Pole
D. Pole extension button
Unwrap Cord
Parts and Features
Set Up Fabric Freshener
1. Unwrap cord from cord storage wrap located on the back of
the Fabric Freshener, below the pole.
2. Plug power cord into outlet.
I
E. Blue support
bracket
F. Release latch
G. Bottom of Fabric
Freshener
H. Pole handle
INSTALLATION INSTRUCTIONS
A B C D
H
G
WARNING
Fire Hazard
Do not use an extension cord.
Doing so can result in death, or fire.
E
F
I. Cycle cup for
distilled water
only
J. Top of Fabric
Freshener
K. ON/OFF button
Extend Fabric Freshener Pole
IMPORTANT: Pole will not rotate to vertical position until pole is
extended to the black line. Be sure bottom section of the pole is
fully extended to the black line to avoid product damage.
A
A. Grip the pole over the green dot.
12" (30.48 cm)
1. Grip the pole over the green dot and extend the pole straight
out in the direction shown by the arrow to the black line on
the pole.
NOTE: Pole will not rotate to vertical position until pole is fully
extended. Be sure second section is fully extended to the
black line before proceeding to Step 2.
A. Extend the second section of the pole to the black line.
2. Holding the pole firmly in place, rotate the pole to a vertical
position.
A
5