DigiTrace TCON-CSD/20

Value range
from...factory-set...to
Parameter Meaning
0.1 ... 0.8 ... 99.9 sec
4 Commissioning the instrument 11
Filter time constant
For adapting the digital input filter (0.0seconds = filter off).
With a signal step, 63% of the changes are registered after the filter time
constant has elapsed.
Values between 0.1 and 0.7 are interpreted as 0.8 (sampling time).
If the filter time constant is too long:
- high damping of interference signals
- slow reaction of the process value display to process value changes
to the first parameter SP of the parameter level by pressing > 3 sec.
H Return