165897000 Incanto Sirius - Rev03-CS.indd - Philips

44
PROGRAMMING MACHINE FUNCTIONS
TIMER
CLEANING
CYCLE
DESCALING
CYCLE
This is a factory-set function that automatically
switches the machine into “Standby” when 3 hours
have elapsed since a coffee was dispensed.
The function is disabled when the “CLOCK”
function is on.
The switch-off time can be adjusted, in 15-minute
intervals, to a minimum of 15 minutes.
This function is used to rinse all the coffeedispensing
parts with water.
The rinsing cycle cannot be interrupted.
A person must be present during this operation.
Warning: a large quantity of water may be discharged
from the coffee brew unit. Before starting, empty out
the drip tray and keep an additional container handy.
This function is used to carry out an automatic
descaling cycle. See Page 34.
A person must be present during this operation.
TIME SETTINGS
Select the MENU.
CLEANING
Select the MENU.
CLEANING
TIME SETTINGS
CLOCK
ON/OFF TIME
TIMER
When the function appears,
select it using the
“OK” button.
CLEANING
CLEANING CYCLE
DESCALING CYCLE
When the function appears,
select it using
the “OK” button.
CLEANING
CLEANING CYCLE
DESCALING CYCLE
Use the buttons to
adjust the timer setting.
CLEANING CYCLE CLEANING CYCLE
Choose whether to
enable or disable the
rinsing cycle.
DESCALING CYCLE
YES
NO
DESCALING CYCLE
Select the MENU. When the function ap- Choose whether to Press the “OK” button to
pears, select it using the enable or disable the confi rm your choice.
“OK” button.
descaling cycle.
TIMER
3:00
YES
NO
TIMER
1:15
Press the “OK” button to
confi rm your choice.
YES
NO
Press the “OK” button
to confi rm your choice.
YES
NO