Maanterä Oy | Kiinnittäminen | Työkappalekiinnittimet sorvaukseen
Tyostokeskusten kiinnittäminen
Tyostokeskusten kiinnittäminen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pikavaihtojärjestelmät<br />
centroteX & capteX | High speed clamping device<br />
Kiinnittimet<br />
Is it practical that the HAINBUCH quick change-over systems fit on every machine? It's even better; you can change the clamping device in<br />
just 20 seconds and thus earn money more quickly. With the fast set-up devices, capteX and centroteX, you can manufacture as the job flow<br />
and the proper workholding on the machine in a matter of minutes. Considering the change-over accuracy is as much as < 0.002 mm, these<br />
!systems are simply unbelievable<br />
Optimize production<br />
However our two high-speed solutions have even more to offer: Your machine downtime times are shortened, production times increase<br />
.accordingly, and the quick change-over systems also pay for themselves quickly. Sensational savings on the entire line<br />
Quality Features<br />
The difference to clamping solutions mounted on the machine? There is virtually no difference! In terms of quality, rigidity and precision, the<br />
.quick change-over interfaces easily keep up<br />
.Get the quick change-over competitive advantages<br />
Key advantages<br />
Interface between machine and clamping device<br />
Dramatic reduction in clamping device change-over times thanks to a quick-acting closure mechanism [5 minutes with a crane and a few<br />
]seconds by hand<br />
No compromises in the selection of clamping devices<br />
Change-over accuracy between machine adapter and clamping device adapter < 0.002 mm – without alignment<br />
Job-oriented manufacturing<br />
centroteX | Kuvaus<br />
Advantages<br />
Quick change-over also of clamping devices with Ø > 300 mm<br />
Clamping device determines RPM limitation<br />
Workpiece passage depending on clamping device is possible<br />
Interface between machine and clamping device<br />
H. <strong>Työkappalekiinnittimet</strong> <strong>sorvaukseen</strong><br />
capteX D | Kuvaus<br />
Advantages<br />
Clamping and torsional safety each via a screw<br />
Workpiece passage up to 52 mm Ø is possible<br />
Interface between machine and clamping device<br />
capteX B | Kuvaus<br />
Advantages<br />
Clamping and torsional safety each via a screw<br />
Fast actuator<br />
]No bayonet coupling [can be mounted without rotary movement<br />
Clamping device determines RPM limitation<br />
Interface between machine and clamping device<br />
H-21