Maanterä Oy | Kiinnittäminen | Työkappalekiinnittimet sorvaukseen
Tyostokeskusten kiinnittäminen
Tyostokeskusten kiinnittäminen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Kiinnittimet<br />
Voimaistukat<br />
SPANNTOP mini | Holkki-istukka<br />
The new »mini« series really shines with a mass reduction of 38 %, 1/3 of less total length and 1/3 of lower<br />
.chuck diameter. this means reduced energy consumption and better tool accessibility<br />
Thanks to the reduced interference contour, it is easier to choose the suitable tool. Now it can also be<br />
shorter and more stable – on the main and sub spindles. Particularly in the case of limited installation<br />
space and in series operation, SPANNTOP mini is ideal: Lower energy consumption, dynamic spindle<br />
.acceleration and shorter cycle times lower the costs per workpiece<br />
Naturally the small SPANNTOP variant offers the same concentricity and low-wear characteristics as its big<br />
.brother<br />
!Minimalism that pays off<br />
Key advantages<br />
Significantly reduced interference contour<br />
Improved tool accessibility<br />
Ideal for limited installation space<br />
Lower mass<br />
Offloading of the machine spindle<br />
Reduced energy requirements<br />
Shorter cycle times<br />
Lower piece costs<br />
SPANNTOP mini | Pullback<br />
Clamping with pull-back effect. Chuck with standing, dismountable<br />
.end-stop plate<br />
Advantages<br />
Workpiece stabilization through axial draw force applied against the<br />
workpiece end-stop<br />
Prepared for inside and front end-stop<br />
Converts to a fully functional »bar chuck« when the end-stop plate is<br />
removed<br />
SPANNTOP mini | Deadlength<br />
Radial clamping without pull-back effect. Chuck with standing, dis-<br />
.mountable end-stop plate<br />
Advantages<br />
Radial clamping without axial movement of the clamping head<br />
Clamps workpieces with a short collar or shoulder<br />
Suitable for pick off without pull-back effect<br />
Prepared for inside and front end-stop<br />
Converts to a fully functional »bar chuck« when the end-stop plate is<br />
removed<br />
www.maantera.fi<br />
H-12