Rheotest english

If a bookmark “Chart” is active, the measured values and calculated parameters of the active sample will be
displayed as a chart. Any data could not be changed. The following main settings are possible: displayed
parameters, colours, lines thickness, marking, coordinate grid, scaling, linear/logarithmic and much more.
These settings take place in Chart Settings that could be displayed by a simple mouse click at a chart or could
be called through the main menu.
Chart dimension is adapted to the dimension of RHEOTEST RN 5 Manager window. Image is divided into
two areas, chart heading is above and chart itself is below. Chart heading will be shown only in that case
when this information has to be displayed. If any information was not defined for display in chart heading, this
area will be used for chart square.
The chart itself is depicted under the chart heading. It is possible to represent four parameters. The
corresponding scale is depicted to the right and to the left of the chart area. The names of the displayed data
series appear above the chart square, under the chart heading.
9.4.2 Main Menu Chart
9.4.2.1 Chart Settings -> Show…
Displays the chart settings of the marked job. New setup window will be opened. For details of settings see
section Chart Settings.
As long as the setting window is active, the main window of RHEOTEST RN 5 Manager can not be operated.
9.4.2.2 Chart Settings -> Copy
Chart settings of the marked job are transferred to the clipboard. Windows clipboard is not used.
If the job is not marked but only jobs’ group, for example, a message with indication appears.
9.4.2.3 Chart Settings -> Paste
If table settings are in a clipboard, they will be inserted into the selected job.
9.4.2.4 Copy to Clipboard
The chart of a current sample is copied as an image to the Windows clipboard. Then it could be inserted in a
document like Excel, Word or E-Mail. The current view will be copied, including the chart head.
Note: The greater is the chart at the time of copying (possible maximize the window of RHEOTEST RN 5
Manager), the higher is the image resolution in a clipboard. A high image resolution is preferable, if later this
figure should to be enlarged.
9.4.2.5 Chart Settings
Settings for content and look of the chart.
This setup acts for the actual job and at the same time for all samples in this job. The settings are divided into
seven tabs: Axis, Grid, Tests, Head, Collection, Print, Font. All changes made will be rejected with the button
Cancel and Menu Settings is closed. The changes will be accepted and they become actual ones with the
help of OK button.
9.4.2.5.1 Axis
It serves for coordination of displayed parameters with chart axis as well as for definition of that how they have
to be displayed.
1 - Type: Determining of the parameters to be displayed from a selection list for the X-axis. Available
parameters and their meaning one could find here: Appendix - Result.
2 - Scale mode: the scaling regime of X axis will be defined. In case of “Auto” scaling will be fulfilled on the
basis of displayed data. Scaling is carried out from 0 to maximal data value.
In case of “Min-Max” displayed limits could be set. Data that are outside these limits will not be displayed. It is
possible to fix and “zoom” the display in this mode.
48