Rheotest english

If there is a method in the method’s library, all functions of the method’s library can be applied. This method
could be shown for example in details, changed, copied or exported. The changed method can be also added
to the job again. For that it is necessary to select exactly this method (in method’s group “xMethods-of-Job”) in
the method’s selection.
Note: The method’s group “xMethods of Job” is not saved. After closing the program, these methods are not
available more. If the method of the job should be saved permanently, it is necessary to copy available
method’s group through Copy/Insert.
The procedure to copy the method from the job, to edit and insert it again into the job is only necessary, if you
get a job from outside and a method contained in it does not have its own method’s library.
9.2.6.22 Export / Import
The “Export / Import” functions are used for archiving data / files. For example, routine jobs where a lot of data
files (Samples) are accumulated can be archived at defined time intervals. For a better clarity, the
measurement data files (Samples) can be then deleted from the Job. This guarantees a secure and fast
operation of the RN 5 Manager.
IMPORTANT! It is strongly recommended, to export jobs with the measurement data regular via the
Export / Import function. First to the Transfer directory, and then copy these jobs from Transfer and
save it in a safe place on the computer. Than the saved samples can be deleted from RN 5 Manager to
ensure fast and problem-free operation of the software. We suggest to transfer and save the data after
every ten measurements and do not have more than ten samples in the job.
In addition, the “Export / Import” functions can be used for exchange the data / files. Thus, e.g. the Jobs of
user can be sent to RHEOTEST for rheological analysis.
9.2.6.22.1 Export / Import -> Export Job
The marked job is saved as a file in the transfer directory. Afterwards it is possible to make this file accessible
for other users of RHEOTEST RN 5 Manager or this file could be archived for documentation. The file name
for the job file corresponds to the job’s name with the file’s extension “.rjb”.
If there is a file with the same name in the data transfer directory, the program asks if it is necessary to
overwrite the file.
9.2.6.22.2 Export / Import -> Import Job
There is a file menu displayed, which represents the data transfer directory. It is possible to select a job, a file
with the file’s extension “.rjb”, from this directory. This job is then inserted in a current position in the job tree. It
might be a new created job’s group or any position inside the existing job’s group. This job will have then the
same functionality as all other jobs.
It could be used for analysis of further samples or for data viewing already existing samples in it.
9.2.6.22.3 Export / Import -> Export Job-group
The marked job’s group is saved as a file in the transfer directory. Afterwards it is possible to make this
directory completely accessible for other users of RHEOTEST RN 5 Manager or this directory could be
archived for documentation. The directory name corresponds to the job’s group name.
If there is directory with the same name in data transfer directory, the program asks if it is necessary to
overwrite the catalogue.
One could not change the content of a job’s group directory. Data safety and program stability could not be
guaranteed in case of any changes of directory content.
9.2.6.22.4 Export / Import -> Import Job-group
There is a file menu displayed, which represents the data transfer directory. It is possible to select a directory
from this directory that is a job’s group for import. The name of the new job’s group corresponds to the
44