Rheotest english

More documents

Recommendations

Info

• Paste Empty Job – It will be inserted the actual job only. Job’s samples will not be insertedtogether with it. This possibility is useful, if you want to start available job with new samples. Itcould be for example in that case when monthly you lay together samples for storage in onejob. At the beginning of the month the job is copied without samples and in name new monthis added (For example, Product_A_May2014). Now all samples for May could be analyzed.Note: Jobs are inserted after the marked job. In order to obtain the job at the first place in the jobs group it isnecessary to mark the jobs group.9.2.6.4 Delete JobDelete of the marked job.Note: Inquiry follows for deletion in that case only, if it is indicated in user’s settings. Deleted jobs go to theDeleted Jobs folder in the directory C:\ RHEOTEST \ RN5 Manager.If the job was deleted by mistake, you can restore it again. To do this, proceed as follows: copy thedeleted job from the folder Deleted Jobs and place it into the folder Transfers. Then, in the main menuof the software, you need to point the place in the jobs-tree, where you want to insert the job beingrestored. Then you need to go to the top menu Job, take the function Export/Import – Import Job andchoose the right job in the folder Transfer, press Open. The job is now restored and can be used.There are two variants of deletion for choice:• Delete Active – the marked job will be deleted• Delete all in group – all jobs will be deleted in the actual jobs group. This possibility is used ifit is necessary to delete jobs’ group. It is possible in that case only when there are no otherjobs.9.2.6.5 Samples -> NewThis has the same effect as in job’s actions New Sample. It starts preparation of a sample manually (not EasyStart).9.2.6.6 Samples -> CopyThe marked sample (in sample tree) is transferred to the clipboard. Windows clipboard does not used. If anysample is marked, message appears with indication.9.2.6.7 Samples-> PasteIf sample is in the clipboard, it will be inserted in actual place in sample tree. The inserted sample has name.However, it is recommended to give a new proper name. So, input of sample name will be activated.9.2.6.8 Samples -> DeleteThere are two variants of deletion for choice:• Delete Active – the marked sample will be deleted• Delete all in job – all samples will be deleted in the actual job. This possibility is used, if forexample copied job should be used for a new samples series.Note: Inquiry follows for deletion in that case only, if it is indicated in user’s settings. Cancel function isinaccessible.9.2.6.9 Table Settings -> Show…Displays the table settings of the marked job. New setup window will be opened. For details of settings seesection Table Settings.As long as the setting window is active, the main window of RHEOTEST RN 5 Manager cannot be operated.42
9.2.6.10 Table Settings -> CopyTable settings of the marked job are transferred to the clipboard. Windows clipboard is not used.If the job is not marked but only jobs’ group, for example, a message with indication appears.9.2.6.11 Table Settings -> PasteIf table settings are in a clipboard, they will be inserted into the selected job.9.2.6.12 Chart Settings -> Show…Displays the chart settings of the marked job. New setup window will be opened. For details of settings seesection Chart Settings.As long as the setting window is active, the main window of RHEOTEST RN 5 Manager cannot be operated.9.2.6.13 Chart Settings -> CopyChart settings of the marked job are transferred to the clipboard. Windows clipboard is not used.If the job is not marked but only jobs’ group, for example, a message with indication appears.9.2.6.14 Chart Settings -> PasteIf there are chart settings in a clipboard, they can be inserted into the selected job.9.2.6.15 Report Settings -> Show…Displays the report settings of the marked job. New setup window will be opened. For details of settings seesection Report Settings.As long as the setting window is active, the main window of RHEOTEST RN 5 Manager cannot be operated.9.2.6.16 Report Settings -> CopyReport settings of the marked job are transferred to the clipboard. Windows clipboard is not used.If the job is not marked but only jobs’ group, for example, a message with indication appears.9.2.6.17 Report Settings -> PasteIf there are report settings in a clipboard, they can be inserted into the selected job.9.2.6.18 Units settings -> Show…Displays the units settings of the marked job. New setup window will be opened. For details of settings seesection Units Settings.As long as the setting window is active, the main window of RHEOTEST RN 5 Manager cannot be operated.9.2.6.19 Units settings -> CopyUnits settings of the marked job are transferred to the clipboard. Windows clipboard is not used.If the job is not marked but only jobs’ group, for example, a message with indication appears.One can copy and paste units settings between Jobs and Methods.9.2.6.20 Units settings -> PasteIf there are units settings in a clipboard, they can be inserted into the selected job. It can be also units settingsfor a method.9.2.6.21 Method to EditCopies the method from the job into the method’s library and changes the display to the method’s library. Thecopied method can be then found in the method’s group „xMethods-of-Jobs“.It is possible to repeat this process.43
Page 1 and 2: RHEOTEST Medingen GmbHOperation Man
Page 3 and 4: Contents1 Introduction ............
Page 5 and 6: 9.5.2.5.3 Print ...................
Page 7 and 8: 1 IntroductionThe Rheometer finds i
Page 9 and 10: 5 Technical Manual5.1 Technical Spe
Page 11 and 12: 5.2.2 Adapter for a Rheometer with
Page 13 and 14: Figure 4 System of Exchangeable Mea
Page 15 and 16: 5.3 Control UnitThe on/off switch (
Page 17 and 18: 5.4.2 Cone/Plate and Plate/Plate Me
Page 19 and 20: 5.5 Peltier Tempering SystemThe pre
Page 21 and 22: Note: The Peltier control unit may
Page 23 and 24: • Then contact the energy supply
Page 25 and 26: 8 Test Preparation and Measurement8
Page 27 and 28: Figure 13 Setting up the Basic Plat
Page 29 and 30: Figure 15 Adapter5. Again, move dow
Page 31 and 32: 6. After clicking OK, the program r
Page 33 and 34: 8.2 Use Cylinder Measuring SystemsW
Page 35 and 36: 9 Software RHEOTEST ® RN 5 Manager
Page 37 and 38: 1 - Job Name: the job name should d
Page 39 and 40: 8 - use RN temperature only: Applic
Page 41: If communication between RHEOTEST
Page 45 and 46: directory name. Imported job’s gr
Page 47 and 48: Table heading makes possible to dis
Page 49 and 50: 3 - Min: Minimum value of X axis. D
Page 51 and 52: 5 - Grid Color: specifies the grid
Page 53 and 54: 5 - add Settings: It will be added
Page 55 and 56: Note: By a choice from the selectio
Page 57 and 58: 8 - Copy Test: The actual test is t
Page 59 and 60: CS-Test decides on the start value
Page 61 and 62: option gives an automatic concatena
Page 63 and 64: Angle Abort Limit: 360°, not requi
Page 65 and 66: In addition, the “Export / Import
Page 67 and 68: 9.7.1.1 Main menu Edit9.7.1.1.1 Edi
Page 69 and 70: 8 - Cancel: All changes will be rej
Page 71 and 72: They will be updated when Service-J
Page 73 and 74: 7 - Phone: Input of phone number of
Page 75 and 76: The following procedure exists for
Page 77 and 78: 12 - Cancel: All changes will be re
Page 79 and 80: 9.7.5 Pt100Pt100 calibration could
Page 81 and 82: It will be printed maximal possible
Page 83 and 84: 10 Bitumen measurements10.1 General
Page 85 and 86: DSR-Test (T-Sweep). The temperature
Page 87 and 88: Please make sure that there is no s
Page 89 and 90: - Resolve the knurled screw (2) (Fi
Page 91 and 92: - Put the sample on the basic plate
Page 93 and 94:
All Jobs start with appropriate tem
Page 95 and 96:
data Gr. X Y meaning calculation un
Page 97 and 98:
MeterBinghamHerschel BulkleyCassonC
Page 99 and 100:
11.5 Calibration of measuring syste
Page 101 and 102:
11.7 Error messages11.7.1 Error mes
show all

Rheotest english

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?