Adhesivos de PVC PVC solvent cement - Astralhavuz.com.tr

<strong>Adhesivos</strong> <strong>de</strong> <strong>PVC</strong>Se quedará <strong>de</strong> una pieza<strong>PVC</strong> <strong>solvent</strong> <strong>cement</strong>All in one piece• Astral gel• Astral blue• <strong>Adhesivos</strong> con tixotropia standard• Solvent Cements with standard thixotropy

Características técnicasTechnical data<strong>PVC</strong> GEL/ <strong>PVC</strong> GELAdhesivo <strong>de</strong> alta resistencia a la presión y gran capacidad <strong>de</strong> relleno <strong>de</strong> holguras, especialmenteindicado para tuberías <strong>de</strong> diámetros gran<strong>de</strong>s. Su consistencia <strong>de</strong> “pasta” permite una distribuciónhomogénea en toda la periferia <strong>de</strong>l tubo o la pieza por gran<strong>de</strong> que esta sea, evitando errores <strong>de</strong>exceso o <strong>de</strong>fecto <strong>de</strong> adhesivo. Conserva su elevada tixotropía incluso con temperaturas superioresa 35 º.Solvent <strong>cement</strong> with a high resistance to pressure and good gap-filling capacity. Specially for largediameter pipes. Its gel consistency means it can be evenly spread on the whole periphery of the pipeor accessory, no matter how large. This avoids applying too much or too little adhesive. Thisconsistency is maintained even in temperatures exceeding 35º.<strong>PVC</strong> BLUE/ <strong>PVC</strong> BLUEAdhesivo <strong>de</strong> alta resistencia a la presión y gran capacidad <strong>de</strong> relleno <strong>de</strong> holguras, especialmente indicado paratuberías <strong>de</strong> <strong>PVC</strong> flexible e instalaciones que <strong>de</strong>ben ser sometidas a presión poco <strong>de</strong>spués <strong>de</strong> la encoladura.Su formula altamente reactiva, y alta velocidad inicial <strong>de</strong> fraguado reducen los tiempos <strong>de</strong> manipulación <strong>de</strong>las encoladuras, y los tiempos <strong>de</strong> secado apto para el paso <strong>de</strong> agua. Esta fórmula permite una mayor penetraciónen las tuberías <strong>de</strong> <strong>PVC</strong> flexible, asegurando una unión más segura y dura<strong>de</strong>ra que los adhesivos tradicionales.Su color azul lo diferencia <strong>de</strong> las formulas tradicionales.Solvent <strong>cement</strong> with a high resistance to pressure and good gap-filling capacity. Specially for flexible <strong>PVC</strong> pipesand installations that have to resist pressure shortly after welding. Its highly reactive formula and high initialforging speed mean short manipulation and drying times, allowing the parts to be used with water shortly afterwelding. This formula reacts on flexible <strong>PVC</strong> more efficiently, assuring a more secure and longer – lasting weldthan traditional <strong>solvent</strong> <strong>cement</strong>s.Its blue colour differentiates it from traditional formulas.• Su alto índice <strong>de</strong> tixotropía permite una fácil aplicación. No escurre ni gotea,por lo que no forma lagrimas en el interior <strong>de</strong> la unión encolada. También evitael <strong>de</strong>scuelgue <strong>de</strong>l producto a la parte más baja <strong>de</strong> la encoladura, lo que <strong>de</strong>jaríala parte superior falta <strong>de</strong> adhesivo.• Its high thixotropy in<strong>de</strong>x makes it easy to apply. It does not run, drip ordribble down the insi<strong>de</strong> of the of the wel<strong>de</strong>d parts. It also avoids the productbuilding up at the bottom of the wel<strong>de</strong>d joint, which would leave the upperpart with too little <strong>cement</strong>.<strong>PVC</strong> CLEANER/ <strong>PVC</strong> CLEANER• Líquido especialmente a<strong>de</strong>cuado para la limpieza y <strong>de</strong>sengrase <strong>de</strong> tuberías, manguitos y otros elementos <strong>de</strong> <strong>PVC</strong> rígidoantes <strong>de</strong> la aplicación <strong>de</strong> adhesivo y para quitar los excesos <strong>de</strong>l mismo tras el ensamblaje.• Special liquid for cleaning and removing grease from pipes and other <strong>PVC</strong> fittings before applying <strong>solvent</strong> <strong>cement</strong>, andfor removing excess adhesive after application once the parts are wel<strong>de</strong>d.Actúa <strong>com</strong>o un lijado químico, preparando lassuperficies en las que se ha aplicado, garantizandouna perfecta soldadura.• No es diluyente <strong>de</strong>l adhesivo.• No ataca al <strong>PVC</strong> rígido.Acts as a chemical abrasive, preparing the surfaces for aperfect welding.• Does not dilute the adhesive.• Does not attack rigid <strong>PVC</strong>.Nos reservamos el <strong>de</strong>recho <strong>de</strong> cambiar total o parcialmente las características <strong>de</strong> nuestros artículos o contenido <strong>de</strong> este documento sin previo aviso.We reserve the right to change all or part of the features of the articles or contents of this document, without prior notice.401.01.01www.astralpool.<strong>com</strong>