AirConServiceCenter ASC2500 - WAECO - AirCon Service

_ASC2500_de_en_es_fr_ru.book Seite 87 Dienstag, 3. Mai 2011 10:24 10AirCon Service CenterOperation2. Press ENTER to confirm.HP/LPHPLPENTER-OK STOP-EXITPORTPORTPORT3. Once all settings have been entered, press ENTER to start theprocess.Process start?8.6.5 After ending the air conditioning service✓ After the air conditioning service has finished, you will be prompted todisconnect the hoses of the AirConServiceCenter from the vehicle airconditioning system.1. Disconnect the service hoses (10) and (11) and press ENTER toconfirm.✓ The service hoses will now be drained. The device is then ready forfurther use.2. Screw the valve caps of the air conditioning system back on theconnections.8.7 Flushing the air conditioning systemINOTEENTER-OK STOP-EXITThe “Flushing” menu is used to flush the vehicle air conditioning systemwith fresh refrigerant. Flushing is especially suitable for replacing oldcompressor oil or removing most metallic residue from the system.Before flushing, the refrigerant must first be extracted from the airconditioning system. Afterwards, the system components which cannot beflushed must be disconnected from the refrigerant circuit (for example, thecompressor or filter). After that, the components to be flushed are connectedto the service ports of the AirConServiceCenter using special adapters toform a flushing circuit.1. First fit the connections of the AirConServiceCenter to the vehicle airconditioning system and open them.2. In the basic menu, use the cursor keys or to select “Freeselection”:Short selectionFree selectionOther selectionsENTER-OKEN 87