AirConServiceCenter ASC2500 - WAECO - AirCon Service

_ASC2500_de_en_es_fr_ru.book Seite 84 Dienstag, 3. Mai 2011 10:24 10OperationAirCon Service Center8.6 Free selectionINOTEThe “Free selection” menu is used to perform air conditioning servicingstep-by-step. You can perform the same processes as in the short selectionmenu, but also omit individual procedures. In addition, it is possible to enterthe values for each individual process using the keypad. You can also enterthe vehicle data for the service report in this menu.The following four processes can performed individually in the “Freeselection” menu:• Recycling phase: extraction, recycling of the refrigerant, pressure risetest, draining the waste oil.• Vacuum phase: evacuation of the system, leak test / vacuum check.• Filling phase: filling with fresh oil, filling of UV additive, filling ofrefrigerant.• Selecting connections: The air conditioning system has a high pressureand low pressure connection, high pressure or low pressure onlyconnections.After each process has been performed, a service report is printed.1. Start by fitting the connections of the AirConServiceCenter to thevehicle air conditioning system, and opening them.2. In the basic menu, use the cursor keys or to select “Freeselection”:Short selectionFree selectionOther selectionsENTER-OK3. Press ENTER to confirm.4. Enter the vehicle data and press ENTER to confirm.84EN