AirConServiceCenter ASC2500 - WAECO - AirCon Service

More documents

Recommendations

Info

_ASC2500_de_en_es_fr_ru.book Seite 72 Dienstag, 3. Mai 2011 10:24 10Initial start-upAirCon Service Center7.9 Filling up the internal refrigerant containerINOTEWhen the AirConServiceCenter is started for the first time, the internalrefrigerant container must be filled from an external refrigerant tank with atleast 5000g of refrigerant.Note the instructions on the refrigerant vessels.The current supply quantities are displayed in the standby menu.There are three different types of refrigerant vessel available:• Refrigerant bottles without rising pipe:These refrigerant bottles have one connection.When filling the AirConServiceCenter, the connection must be on thebottom (turn the bottle upside down).• Refrigerant bottles with rising pipe:These refrigerant bottles have one connection.When filling the AirConServiceCenter, the connection must be at thetop (place the bottle upright).• Refrigerant bottles with rising pipe:These refrigerant bottles have two connections. To top up theAirConServiceCenter, use the connection marked with L (= liquid).When filling the AirConServiceCenter, the connection must be at thetop (place the bottle upright).1. In the basic menu, use the cursor keys or to select “Otherselections”:2. Press ENTER to confirm.3. Use the cursor keys or to select “Int. vessel filling”:4. Press ENTER to confirm.Short selectionFree selectionOther selectionsENTER-OKInt. vessel fillingFlushingReset scales.Service.72EN
_ASC2500_de_en_es_fr_ru.book Seite 73 Dienstag, 3. Mai 2011 10:24 10AirCon Service CenterInitial start-up5. Then follow the instructions in the display and provided here:Press ENTER to confirm.Connect the HP hoseto the external tankthen open the valveENTER-OK STOP-EXITSet the quantitythen confirm!g. 13620ENTER-OK STOP-EXITThe maximum refrigerant quantity which can be added appears in thedisplay.Enter the required amount and press ENTER to confirm.The internal refrigerant container is filled.When the filling process is finished, this will be confirmed by anacoustic signal.Close the valves and press ENTER to confirm.6. After filling, the quantity of refrigerant in the internal container isdisplayed. Press STOP to exit the menu.Press STOP again to access the standby menu.The device is now ready for operation.EN 73
Page 1 and 2:
_ASC2500_de_en_es_fr_ru.book Seite
Page 4 and 5:
Page 6:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 21: _ASC2500_de_en_es_fr_ru.book Seite
Page 24 and 25: _ASC2500_de_en_es_fr_ru.book Seite
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
show all

AirConServiceCenter ASC2500 - WAECO - AirCon Service

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?