AirConServiceCenter ASC2500 - WAECO - AirCon Service

_ASC2500_de_en_es_fr_ru.book Seite 67 Dienstag, 3. Mai 2011 10:24 10AirCon Service CenterInitial start-up7.4 Entering company dataThe company data is printed out with every service log.1. In the basic menu, use the cursor keys or to select “Otherselections”:Short selectionFree selectionOther selectionsENTER-OK2. Press ENTER to confirm.3. Use the cursor key to select “Service”.4. Press ENTER to confirm.5. Enter the password “3282”.6. The company data is shown in the third line of the display (6).You can enter five lines, each with up to 20 characters.The display shows the number of lines of company data after themessage “Enter company data” (“01” to “05”).Use the cursor keys or to select the line of company data youwant.7. Use the keypad (7) and the cursor keys to enter the data.To switch between upper and lower case, press the Info key .To delete a character, briefly press the C key.To delete the current line, press and hold down the C key.8. Press ENTER to confirm.9. Press STOP. The set data is activated.10. Press STOP again to access the standby menu.EN 67