AirLive WL-5470AP Quick Setup Guide

Wireless Mode SetupThis page include all primary and major parameters for the wireless modesetting. Any parameter change will cause the device to reboot for the newsetting to take effect.Wireless Modes: AP, Client, Bridge, WDS Repeater, UniversalRepeater, WISP(Client Router), WISP + UniversalRepeater and Gateway (Broadband Router) modeThe default mode is set to AP. You can change it to another mode.Network Type: When in Client mode, you can select between Ad-Hoc orInfrastructure.EnglishClient / Bridge Mode SetupClient ModeDevice B:WISP Outdoor APNetwork Type: InfrastructureDevice A:Mode: Client modePlease make sure both A and B are set to the same ESSID and channel.Wireless Access PointWL-5470APEnglish5