Phocos CML-V2
Phocos CML-V2
Phocos CML-V2
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Mounting and ConnectingThe controller is intended for indoor use only. Protect it fromdirect sunlight and place it in a dry environment. Never install itin humid rooms (like bathrooms). The controller measures theambient temperature to determine the charging voltage. Controllerand battery must be installed in the same room.The controller warms up during operation, and should thereforebe installed on a non flammable surface only.REMARK: Connect the controller by following the steps describedbelow to avoid installation faults.1Mount the controller to the wall withscrews that fit to the wall material.Use screws with 4 mm shaft and max.8 mm head diameter, no counter sink.Mind that the screws have to carry alsothe force applied by the wiring.Make sure that the ventilator slits onthe sides are unobstructed.21