FX06 Field Controller - Tech-System
FX06 Field Controller - Tech-System FX06 Field Controller - Tech-System
Technical SpecificationsProductFX06 Field ControllerPower Requirement 24 VAC/VDC ±15% 50/60Hz SELV (Europe) - Class 2 North AmericaPower Consumption 7 VA maximumAmbient OperatingConditionsAmbient StorageConditionsPower SupplyOutputsAnalog Inputs andAccuracyat 20 °C (68 °F)Ambient (sensorerror not included)Display Range andResolutionDigital InputsAnalog InputsAnalog OutputsContinued on next page...-20 to 50 °C (-4 to +122 °F)10 to 95% RH (non condensing)-40 to 70 °C (-40 to +158 °F)10 to 95% RH (non condensing)• 24VAC/DC for panel mount MUI (from controller power supply input)• 15 VDC 20 mA power supply for active sensors• 5 VDC 15 mA power supply for ratio-metric sensors16 bit resolutionSensor Type Range AccuracyA99 -40 to 100 °C (-40 to 212 °F) ±0.5 °C (±1 °F)NTC K10 -20 to 70 °C (-4 to 158 °F) ±0.5 °C (±1 °F)PT1000-40 to 160 °C (-40 to 320 °F) ±1 °C (±1.8 °F)ExtendedNi1000 -40 to 120°C (-40 to 248 °F) ±1 °C (±1.8 °F)Active 0 - 10 V 0..10 VDC ±0.1Active0.5...4.5 VDC ±0.05 VDCRatiometric-999 to 999 or -99.9 to 99.9Voltage free contacts.Transition counter function on DI1 at 50 Hz (minimum 10 ms ON andminimum 10 ms OFF)See above for input types.Not isolated. 0 - 10 VDC ±1%, 3 mA (13 bit resolution), for actuating andcontrol devices.Pulse Width Modulation (PWM) Signal at 100Hz cycle frequency.FX06 Field Controller - Installation Guide5
Digital Outputs forSelected Models Model Channel TypeFX06P0x / P1x DO1 - DO6 SPST 3(1)A,250 VACrelayFX06P2x / P3x DO1, DO2 0.5A / 24VAC triacsRelay OutputsConnectionsDimensions(H x W x D)DO3 - DO6SPST 3(1)A,250 VACrelayRemark/ApplicationEach relay contact isindependent with itsown common terminal.3-point incrementalactuators, thermalactuators, etcOn the FX06P2xmodels, each relaycontact is independentwith its own commonterminal. On theFX06P3x model, DO4,DO5 and DO6 relaysare physicallyinterlocked, i.e. only oneoutput can be closed atone time. Application:3-speed fan motors.The DO3 relay isindependent.Dielectric test voltage on open relay contact: 1,000 VAC RMSMaximum relay switching rate at nominal load: 6 operations/minAverage relay contact life: 30,000 operations at maximum load.Molex ® connectors. Mating connectors and cables provided withcontroller or available to order. (See “Ordering Codes”).See Figure 1, 2 and 3Protection Class Front Plate (when mounted in panel): IP55Rear Enclosure:IP20Housing Material ABS + polycarbonate, self-extinguishing: UL94 5V0 flammability ratingCompliance Europe Directive• 89/336/EEC EMC EN 61000-6-2, EN 61000-6-3• 72/23/EEC, LV EN 60730Canada• UL Listed (PAZX7), CAN/CSA C22.2 No. 205, Signal Equipment• UL Recognized (XAPX8), CAN/CSA C22.2 No. 24,Temperature Indicating and Regulating Equipment• Industry Canada, ICES-003United States• UL Listed (PAZX), UL 916, Energy Management Equipment• UL Recognized (XAPX2), UL 873,Temperature Indicating and Regulating Equipment• FCC compliant to CFR 47, Part 15, Subpart B, Class A6 FX06 Field Controller - Installation Guide
- Page 3: Figure 1: Dimensions in mm (inches)
- Page 6 and 7: Figure 9: Communication Module Dime
- Page 8 and 9: FX06 Field ControllerInstallation G
- Page 10 and 11: Figure 5:Figure 6:Figure 7:Figure 8
- Page 14 and 15: Contrôleur de champs FX06Guide d
- Page 16 and 17: Figure 5:Figure 6:Figure 7:Figure 8
- Page 18 and 19: Caractéristiques techniquesProduit
- Page 20 and 21: FX06 Field-ControllerInstallationsa
- Page 22 and 23: Abbildung 5: LP-FX06P0x Verdrahtung
- Page 24 and 25: Technische MerkmaleProduktFX06 Fiel
- Page 26 and 27: Field Controller FX06Guida all’in
- Page 28 and 29: Figura 5:Figura 6:Figura 7:Figura 8
- Page 30 and 31: Specifiche tecnicheProdottoField Co
- Page 32 and 33: Controlador de campo FX06Guía de I
- Page 34 and 35: Figura 5:Figura 6:Figura 7:Figura 8
- Page 36 and 37: Especificaciones técnicasProductoC
- Page 38 and 39: FX06 VeldregelaarInstallatie-instru
- Page 40 and 41: Figuur 5: LP-FX06P0x Bedradingssche
- Page 42 and 43: Technische specificatiesProductFX06
- Page 44 and 45: Fältstyrenhet FX06Installationsgui
- Page 46 and 47: Figur 5:Figur 6:Figur 7:Figur 8:LP-
- Page 48 and 49: Tekniska specifikationerProduktFäl
- Page 50 and 51: Řadič FX06Instalační návodČ.
- Page 52 and 53: Obrázek 5: Schéma zapojení zař
- Page 54 and 55: Technické údajeProduktŘadič FX0
- Page 56: Johnson Controls International, Inc
Digital Outputs forSelected Models Model Channel Type<strong>FX06</strong>P0x / P1x DO1 - DO6 SPST 3(1)A,250 VACrelay<strong>FX06</strong>P2x / P3x DO1, DO2 0.5A / 24VAC triacsRelay OutputsConnectionsDimensions(H x W x D)DO3 - DO6SPST 3(1)A,250 VACrelayRemark/ApplicationEach relay contact isindependent with itsown common terminal.3-point incrementalactuators, thermalactuators, etcOn the <strong>FX06</strong>P2xmodels, each relaycontact is independentwith its own commonterminal. On the<strong>FX06</strong>P3x model, DO4,DO5 and DO6 relaysare physicallyinterlocked, i.e. only oneoutput can be closed atone time. Application:3-speed fan motors.The DO3 relay isindependent.Dielectric test voltage on open relay contact: 1,000 VAC RMSMaximum relay switching rate at nominal load: 6 operations/minAverage relay contact life: 30,000 operations at maximum load.Molex ® connectors. Mating connectors and cables provided withcontroller or available to order. (See “Ordering Codes”).See Figure 1, 2 and 3Protection Class Front Plate (when mounted in panel): IP55Rear Enclosure:IP20Housing Material ABS + polycarbonate, self-extinguishing: UL94 5V0 flammability ratingCompliance Europe Directive• 89/336/EEC EMC EN 61000-6-2, EN 61000-6-3• 72/23/EEC, LV EN 60730Canada• UL Listed (PAZX7), CAN/CSA C22.2 No. 205, Signal Equipment• UL Recognized (XAPX8), CAN/CSA C22.2 No. 24,Temperature Indicating and Regulating Equipment• Industry Canada, ICES-003United States• UL Listed (PAZX), UL 916, Energy Management Equipment• UL Recognized (XAPX2), UL 873,Temperature Indicating and Regulating Equipment• FCC compliant to CFR 47, Part 15, Subpart B, Class A6 <strong>FX06</strong> <strong>Field</strong> <strong>Controller</strong> - Installation Guide
Change language