Top Digital Audio Baby Monitor - Chicco
Top Digital Audio Baby Monitor - Chicco Top Digital Audio Baby Monitor - Chicco
Activation menu, you decide to exit and returnto the main menu without saving any settings,press the navigation back button (9) for about 2seconds.3.2.3 Date and Time settingTo set the current date and time, press the button(7). The Alarm icon will begin to flash on thedisplay (5)Press the navigation buttons (8-9) until theicon flashes. Confirm the your selection bypressing the button (7).To set the date and time, only use the navigationforward button (8). Press the navigation backbutton (9) to move the cursor backward oneposition.Note: If during navigation within the Date andTime setting menu, you decide to exit and returnto the main menu without saving any settings,press the navigation back button (9) for about 2seconds.3.2.4 Reminder setting menuTo set the reminders to be set and activated, pressthe button (7). The Vibration alarm icon will beginto flash on the display (5).Press the navigation buttons (8-9) until theicon flashes. Confirm the your selection bypressing the button (7).You now access the Reminder Selection menu.onrembutThe display will show the date and time pre-set bythe manufacturer.The numbers related to the days will begin toflash. To set the current day, press the navigationforward button (8) several times. The numbersrelative to the day will increase progressively.Confirm the day with the button (7).The numbers related to the months will begin toflash automatically on the display.To set the current month, press the navigationforward button (8) several times. The numbersrelative to the month will increase progressively.Confirm the month with the button (7).The numbers related to the hour will begin toflash automatically on the display.To set the current hour, press the navigationforward button (8) several times. The numbersrelative to the hour will increase progressively.Confirm the hour with the button (7).The numbers related to the minutes will begin toflash automatically on the display.To set the current minutes, press the navigationforward button (8) several times. The numbersrelative to the minutes will increase progressively.Confirm the minutes with the button (7).You will automatically exit from the menu (5).The set date and time will appear.Note:If an impossible date is set (e.g. 30-02-2011), adouble beep will be heard and the row relatedto the date will begin to flash at the end of thesetting procedure.Note:34The following reminders can be set:· meal reminder· measure fever reminder· medicine reminder· diaper change reminder· sleep reminderThe Meal reminder icon will begin to flash on thedisplay (5). To display icons for other reminders,press the navigation buttons (8-9) until thedesired reminder icon flashes. Confirm yourselection via the button (7).Note: If during navigation within the ReminderSelection menu, you decide to exit and return tothe main menu without saving any settings, pressthe navigation buttons (8-9) until the icon isdisplayed Confirm with the button (7).Setting and activating the selected ReminderThe possibility to select between “ON”, (“ON”flashes if the reminder function was previouslyset) and “OFF” (“OFF” flashes if the reminderfunction was not previously set) will appearTheremTheflasforwrelaConTheflasToforwrelaConTheflasToforwrela
ionacknendurngs,t 2essginthebyon the display. To set and activate the selectedreminder, select “ON” with the navigationbuttons (8-9) and confirm with the button (7).The display will show the date and time of thereminder pre-set by the manufacturer.Confirm the hour with the button (7).The numbers related to the minutes will begin toflash automatically on the display.To set the minutes, press the navigation forwardbutton (8) several times. The numbers relative tothe minutes will increase progressively with 15sec. steps (e.g. 10:00-10:15-10:30). Confirm theminutes with the button (7).You will automatically return to the reminderselection menu and the display (5) will show theicon relative to the activated reminder.Note:Once set and activated, the reminder will remainsaved in the unit even after it is switched off,unless batteries are removed.Note:If an already expired or impossible date is set, adouble beep will be heard and the row relatedto the date will begin to flash at the end of thesetting procedure.Note:To set the date and time, only use the navigationforward button (8). Press the navigation backbutton (9) to move the cursor backward oneposition.thers,theurdertoessisN”slyderearThe numbers related to the days will begin toflash. To set the current day, press the navigationforward button (8) several times. The numbersrelative to the day will increase progressively.Confirm the day with the button (7).The numbers related to the months will begin toflash automatically on the display.To set the current month, press the navigationforward button (8) several times. The numbersrelative to the month will increase progressively.Confirm the month with the button (7).The numbers related to the hour will begin toflash automatically on the display.To set the current hour, press the navigationforward button (8) several times. The numbersrelative to the hour will increase progressively.35Deactivating the selected ReminderThe possibility to select between “ON”, (“ON”flashes if the reminder function was previouslyset) and “OFF” (“OFF” flashes if the reminderfunction was not previously set) will appear onthe display. To deactivate the selected reminder,select “OFF” with the navigation buttons (8-9)and confirm with button (7).You will automatically return to the reminderselection menu and the display (5) will show theicon relative to the deactivated reminder.Note: If during navigation within the menu,you decide to exit and return to the main menuwithout saving any settings, press the navigationback button (9) for about 2 seconds.4.Parent unit internal Menu Management inReminder modeThe parent unit in Reminder mode includes anavigation menu, from which it is possible to set,activate and deactivate selected reminders.The features included are:· date and time setting· reminders
- Page 1 and 2: Top Digital AudioBaby MonitorMod. 0
- Page 4 and 5: CO- Untras- Uncevi- D50/- B800- C-
- Page 6: 6batteria ricaricabile agli ioni di
- Page 9 and 10: i-0-atinledelivointooinLivello mass
- Page 11 and 12: o-perleitàlleedpereredionelitàlta
- Page 13 and 14: o-ne/ino ilbeacpe-itàunitàilinoby
- Page 15 and 16: so-ni-ataifreaarettanavigazione(8-9
- Page 17 and 18: delirenandivaar-liz-are(“OFF” l
- Page 19 and 20: sicolca-di-areNEdiNIalalatneiatiial
- Page 21 and 22: RISOLUZIONE DI PROBLEMIIn caso si v
- Page 23 and 24: siLa temperatura nonviene visualizz
- Page 25 and 26: utthe.A.rilyrilyioninsbleorofcestor
- Page 27 and 28: dstorithorionlAhHzbyionentioniontor
- Page 29 and 30: on:tohtnyedtheitythebleumillityityu
- Page 31 and 32: Ifofiedtootndntds.illginingnit.ennd
- Page 33: thekerifelydsdsighby(5)bytedInect0)
- Page 37 and 38: e’sonG:ns.ORies.als.ayalsbeeirire
- Page 39 and 40: TROUBLESHOOTINGIf you experience pr
- Page 41 and 42: DECLARATION OF CONFORMITY:Mod. 0662
- Page 43 and 44: .erdecteeronarala, elenríaviderri-
- Page 45 and 46: ipoad.anvozvozosdaadco-.coadal.al-a
- Page 47 and 48: enu-iónesnosucadelcodidoes.ninyo-s
- Page 49 and 50: stáctaseresioec-lariorensersedenoc
- Page 51 and 52: elño,resias, lahaatoenr elraosdait
- Page 53 and 54: óniónongirhaFF”an-io-) ysepedel
- Page 55 and 56: ar.veivoelti-na-esestidelalatióno
- Page 57 and 58: searadoloisin-lasu-cia5 Vdelasm-enl
- Page 59 and 60: ue:), oLa unidad parapadres (recept
- Page 61 and 62: otrasidadcciónenciaclaseaparato ag
- Page 63 and 64: co,aotesueseizeaoerdecteeromosriari
- Page 65 and 66: . Oderes,ãouremouidoingou03esdada
- Page 67 and 68: tesoss àstiose-de1,5es-(8)nedecede
- Page 69 and 70: acasdeo-esloeaa éaisesuraossestáe
- Page 71 and 72: os eaiso-ãoa eel,deia/osoarási-.
- Page 73 and 74: tãoralhaesãoFF”n-narn--seivonua
- Page 75 and 76: titãoú-ão.titãoú-ão.tideeroo
- Page 77 and 78: m-doneltonele-ciasdaaiasaisemdeasdo
- Page 79 and 80: ese:oue-oloreoo,ra, aInterferência
- Page 81 and 82: enraw.asseto,veos,te.uao àeisto.a-
- Page 83 and 84: ’ilsr àaleci-C/ate.o-esnansonC/u
ionacknendurngs,t 2essginthebyon the display. To set and activate the selectedreminder, select “ON” with the navigationbuttons (8-9) and confirm with the button (7).The display will show the date and time of thereminder pre-set by the manufacturer.Confirm the hour with the button (7).The numbers related to the minutes will begin toflash automatically on the display.To set the minutes, press the navigation forwardbutton (8) several times. The numbers relative tothe minutes will increase progressively with 15sec. steps (e.g. 10:00-10:15-10:30). Confirm theminutes with the button (7).You will automatically return to the reminderselection menu and the display (5) will show theicon relative to the activated reminder.Note:Once set and activated, the reminder will remainsaved in the unit even after it is switched off,unless batteries are removed.Note:If an already expired or impossible date is set, adouble beep will be heard and the row relatedto the date will begin to flash at the end of thesetting procedure.Note:To set the date and time, only use the navigationforward button (8). Press the navigation backbutton (9) to move the cursor backward oneposition.thers,theurdertoessisN”slyderearThe numbers related to the days will begin toflash. To set the current day, press the navigationforward button (8) several times. The numbersrelative to the day will increase progressively.Confirm the day with the button (7).The numbers related to the months will begin toflash automatically on the display.To set the current month, press the navigationforward button (8) several times. The numbersrelative to the month will increase progressively.Confirm the month with the button (7).The numbers related to the hour will begin toflash automatically on the display.To set the current hour, press the navigationforward button (8) several times. The numbersrelative to the hour will increase progressively.35Deactivating the selected ReminderThe possibility to select between “ON”, (“ON”flashes if the reminder function was previouslyset) and “OFF” (“OFF” flashes if the reminderfunction was not previously set) will appear onthe display. To deactivate the selected reminder,select “OFF” with the navigation buttons (8-9)and confirm with button (7).You will automatically return to the reminderselection menu and the display (5) will show theicon relative to the deactivated reminder.Note: If during navigation within the menu,you decide to exit and return to the main menuwithout saving any settings, press the navigationback button (9) for about 2 seconds.4.Parent unit internal Menu Management inReminder modeThe parent unit in Reminder mode includes anavigation menu, from which it is possible to set,activate and deactivate selected reminders.The features included are:· date and time setting· reminders