Top Digital Audio Baby Monitor - Chicco

dstorithorionlAhHzbyionentioniontornsnddstopert isern.ostthetorlight will begin to flash red.When charging of the rechargeable lithium-ionbattery begins, the beep switches off and therechargeable battery status indicator light lightsup steady red until charging is complete.c) Reminder signal function.12. Power and link indicator light:(a) Steady green: linked with baby unit(b)Flashing green: absence of or loss of link withbaby unit(c) OFF: parent unit off in Baby Monitor mode oron in Reminder mode.13. Rechargeable lithium-ion battery statusindicator light:(a)Flashing red: rechargeable battery almost flat(b) Steady red: charging of rechargeable batteriesin progress via mains adapter(c) OFF: rechargeable battery charged oroperation via mains adapter without rechargeablebattery14. Rechargeable battery compartment closingpanel15. Belt hook16. Holes for support cord (not included)17. Audio output18. 3.7V 800mAh rechargeable lithium-ionbattery via 100-240V ~ 50/60Hz /6V500mA mains switching adapter19. Power connector and/or rechargeablelithium-ion battery charger20. Headphones1.4 Icons shown on the displayIn Baby Monitor modeIn Reminder modeProper connection between units (only inBaby Monitor mode)Loss or lack of connection between units(only in Baby Monitor mode)27Date and time21°C Temperature detected in child’s room(only in Baby Monitor mode)--°C Temperature not detectedVoice activation function (only in Baby Monitormode)Vibration alarm set (only in Baby Monitormode)Meal Reminder setMeasure fever reminder setMedicine reminder setDiaper change reminder setSleep reminder setMinimum volume level (only inBaby Monitor mode)Maximum volume level (only inBaby Monitor mode)Rechargeable battery chargedMedium charging level on rechargeable batteryLow charging level on rechargeable batteryRechargeable battery flat: the parent unitwill switch off within a few minutes2. Description of features2.1 Baby unit (primarily in transmitter mode):2.1.1 Power:Power via 100-240V~ 50/60Hz /6V500mA (1) mains switching adapter or via two1.5V AAA /LR03 Alkaline batteries (not included)When power is supplied with mains adapter (1):- insert the mains adapter jack (1) in the powerconnector (15) on the side of the unit- verify that the voltage corresponds to the ratingplate of the previously indicated adapters.- insert the mains adapter plug in an easilyaccessible power socket.ATTENTION: