Air Circuit Breaker Interruptor Abierto Disjuntor Aberto ABW - Weg
Air Circuit Breaker Interruptor Abierto Disjuntor Aberto ABW - Weg
Air Circuit Breaker Interruptor Abierto Disjuntor Aberto ABW - Weg
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
open <strong>Circuit</strong> <strong>Breaker</strong><br />
5 MAIntenAnCe AnD InSpeCtIon<br />
AttentIon!<br />
The frequency and extent of maintenance and inspection depends on<br />
operating conditions and the environment of installation of the circuit breaker.<br />
Attentively read the recommendations contained in this section before<br />
energizing the circuit breaker.<br />
5.1 prelIMInAry orIentAtIonS<br />
The circuit breakers must be inspected for a part to be detected at the beginning of<br />
deterioration so that performance characteristics are maintained and so that accidents are<br />
prevented that could occur due to the circuit breaker arriving at the end of its useful life.<br />
Frequency of inspection<br />
Application Installation environment Specific examples<br />
General<br />
cases<br />
Special<br />
applications<br />
Environments where the air<br />
is always clean and dry.<br />
Environments with little<br />
dust, free of corrosive<br />
gases.<br />
Salty environment, high<br />
temperatures and presence<br />
of corrosive gases.<br />
Environments with high<br />
concentration of corrosive<br />
gases and/or soot.<br />
5.2 InItIAl InSpeCtIon<br />
66 | <strong>ABW</strong> English<br />
Frequency of<br />
Inspection<br />
Electrical rooms with air<br />
conditioning and anti-dust filters.<br />
Once every 2<br />
years.<br />
Non-climate controlled rooms.<br />
Thermal plants (generation),<br />
water/sewage treatment stations,<br />
metallurgical, paper and cellulose<br />
industry, etc.<br />
Once a year.<br />
Chemical, mining industries, etc. Every 6 months.<br />
previous Inspection before turning on the <strong>Circuit</strong> <strong>Breaker</strong><br />
Below are items to be inspected at the time of installation of the circuit breaker, before<br />
turning it on.