DHI 635 HX / DHI 645 HX - Moebelplus GmbH

Preparing the wall cupboard3. Align and screw on the enclosedmounting rails. Note the thickness of the sides of thecupboard (16 mm or 19 mm).dimension X.x=16mmx=19mmInstallation inside the wallcupboard1. Remove the filter frames (see OperatingManual).2. If the hinges are no longer accessiblewhen the extractor hood has beeninstalled, align the cupboard doors.3. Lift and push the extractor hood frombelow into the cupboard until theinstallation aids on the left and right lockinto position.X If the interior depth of the cupboard isless than 280 mm, the 250 mm high rearpanel must be removed.4. Pull out the filter drawer all the way.5. Attach the extractor hood by screwingin 2 screws on the left and right. DoNOT tighten the screws. Raise theextractor hood.6. Align the extractor hood in thecupboard and tighten the screws.27