o_199h4lba31k711hfurk75c9jrja.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
We have the solution for every problem<br />
PROBLEM CAUSES SOLUTION PRODUCT<br />
TURBID WATER<br />
Too much organic<br />
waste, poor<br />
filtration, inadequate<br />
disinfection.<br />
Check the filter, do a backwash and<br />
increase filtration time. If necessary,<br />
clean out the sand with NETAFILTROS.<br />
Provide a DIAFLOC treatment. Check<br />
and adjust pH with DIAMINUS or<br />
DIAMAS as appropriate. Should<br />
turbidity persist carry out a shock<br />
chlorination.<br />
GREEN WATER<br />
WITH ALGAE<br />
Excessive amount of<br />
micro-organisms in<br />
the water. Insufficient<br />
algaecide.<br />
Remove algae build-up on walls and<br />
bottom with a brush. Check and<br />
adjust pH with DIAMINUS. Carry out a<br />
shock chlorination with DIACLOR GR<br />
60. Add flocculant and an additional<br />
double amount of DIQUAT 15. Increase<br />
filtration time until the water regains its<br />
blue colour.<br />
HARD TO RECOVER<br />
WATER<br />
Excessive growth of<br />
algae and abundance<br />
of organic matter.<br />
Adjust water pH. Carry out a shock<br />
treatment with 50 g of DIASTAR per<br />
cubic metre of water. Increase filtration<br />
time until the water regains its blue<br />
colour. Readjust the pH if necessary.<br />
FOAM<br />
Presence of<br />
chloramines and<br />
organic matter.<br />
Partially empty the pool and add<br />
DIACLORAMIN. Adjust the pH and<br />
chlorine levels.<br />
BROWN SPOTS<br />
Acidic or corrosive<br />
water that rusts metal<br />
parts.<br />
Check and adjust pH with DIAMINUS<br />
PH. Check chlorine level and adjust it.<br />
ITCHY EYES AND<br />
EXCESSIVE ODOUR<br />
OF CHLORINE<br />
Improperly adjusted<br />
pH, possible increase<br />
of chloramine content.<br />
Check and adjust pH with DIAMINUS<br />
PH or DIAMAS PH as appropriate.<br />
Analyse the chlorine level and if it<br />
is too low, then carry out a shock<br />
chlorination with DIACLOR GR 60 or use<br />
DIACLORAMIN.<br />
ALMOST<br />
TRANSPARENT<br />
WATER<br />
Water remaining after<br />
filling, after a storm, or<br />
when the pool cleaner<br />
has been passed too<br />
quickly.<br />
Adjust pH with DIAMINUS or DIAMAS<br />
as appropriate. Wash the backwash<br />
filter. Add DIACLOR GR 60 and 2 bags of<br />
DIAFLOC PS in the skimmers, increasing<br />
filtering time.<br />
SCALE BUILD-UP<br />
Hard water.<br />
Adjust pH with DIAMINUS. Add DIACAL:<br />
3 litres per 100 m 3 to start with and<br />
then 1 litre every fortnight.
Change language