AirConServiceCenter ASC2500 - WAECO - AirCon Service

Service tasks
AirCon Service Center
9.2 Changing the dryer filter
1. In the basic menu, use the cursor keys or to select “Free
selection”:
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER to confirm.
3. Skip the query requesting “CAR DATA”.
4. Select “Rec/Recycling phase”.
5. Set the “Pressure increase test time min.” to “1”.
Press ENTER to confirm.
6. Deselect “Vacuum phase” using “No”.
Press ENTER to confirm.
7. Deselect “Filling phase?” using “No”.
Press ENTER to confirm.
8. Select “Start processes?”.
Press ENTER to confirm.
The service hoses will now be drained and the AirConServiceCenter
basic menu will be activated. The compressor has produced a slight
internal vacuum so that the filter can be replaced with minimal
refrigerant loss.
9. Unscrew the screw (D) from the holder, and pull the dryer filter straight
out.
D
D
92
EN